Search results for: 'connections 9'

AEMC MiniFlex® 30/300A flexible AC current probe measures up to 300A with high-frequency response, lightweight design, and compatibility with BNC oscilloscopes.

Fluke 376FC True-RMS Clamp Meter delivers wireless AC/DC current and voltage measurements up to 1000A with iFlex probe and Fluke Connect support.

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

Compact, flexible AC current probe with dual range 300/3000A and selectable 10mV/A or 1mV/A outputs. Its 24" Rogowski coil fits tight spaces — ideal for use with DMMs, scopes, and power meters. Includes a 14" lead with banana plugs.

AEMC 6422 Digital Ground Resistance Tester: Accurate 3-point ground testing with auto-ranging, backlit LCD, and easy hookup for reliable earth resistance measurement.

Megger DLRO10 digital microhmmeter provides 10A low-resistance testing from 0.1 μΩ to 2000 Ω with Kelvin accuracy, automatic forward/reverse current, inductive mode, P-Type twist probes, 3m hook leads, and hard case.

Fluke VPS421-B 100:1 Voltage Probe Set – High-precision, 150MHz bandwidth, CAT IV 600V rated. Ideal for high-voltage troubleshooting!

AEMC AmpFlex® flexible Rogowski coil sensor, 48" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

High-performance AEMC JM861 AC current probe with 3 ranges (30A, 300A, 3000A), low phase shift, BNC output, ideal for oscilloscopes & power quality analysis.

comemso Combined Mini-Charger-Tester HW Rev3.4 delivers fast portable CCS and CHAdeMO EVSE checks with touchscreen control, EV simulation, live results, and stored reports.

Fluke Wireless General Maintenance System: Fast, safe, and easy electrical panel testing with multi-module AC voltage and current measurements.

Fluke I17XX-FLEX1500 iFlex flexible AC current clamp measures up to 1500A AC and connects directly to compatible Fluke power and energy loggers, enabling easy installation on large conductors.

Fluke Solmetric PVA-1500 measures high-efficiency PV I-V curves up to 1500V and 30A with fast sweep times, wireless connectivity, and automated analysis.

3 5/6 digits 5999 counts 0.5% best accuracy Dual display with analog bargraph Auto/Manual ranging USB data upload Measurement Range DC Voltage (DCV) 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+6d) AC Voltage (ACV) 6/60/600V ±(0.8%+10d), 750V ±(1.0%+10d) DC Current (DCA) 600μ/6000μA ±(1.0%+10d), 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) AC Current (ACA) 600μ/6000μA ±(1.5%+10d), 60m/600mA ±(1.5%+10d), 6/10A ±(2.0%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 100/1000Hz ±(0.5%+4d), 10k/100kHz ±(0.5%+4d), 1M/30MHz ±(0.5%+4d) Capacitance 40nF±(5%+30d), 400n/4μ/40μF±(3.5%+8d) 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.5%+15d) Continuity with Buzzer Yes Diode Test Yes Transistor Test Yes Power Source AAA(1.5V)×2pcs (Not included)

Boost energy efficiency with the Fluke 1735 Power Logger! Perfect for three-phase load studies & electrical troubleshooting. Learn more and optimize your systems today! 

The Fluke i400s AC Current Clamp extends current measurement capability for multimeters, power quality analyzers, and oscilloscopes. It supports AC current ranges from 0.5 A to 400 A with dual output scaling and a compact clamp design rated for CAT IV 600 V environments.

This Fluke PV Analyzer expands field testing for high-efficiency modules and strings, delivering fast I-V curve tracing, string performance checks, and on-site diagnostics for modern solar arrays. It helps verify system health, detect hidden performance issues, and document results with clear, standards-aligned reporting.

Fluke i17XX-FLEX6000 flexible 36-inch current clamp measures up to 6000A AC and connects directly to Fluke 17XX loggers for accurate, scalable-free current readings.

Fluke I17XX-FLEX1500/3PK flexible current probes deliver up to 1500A AC measurement with 12-inch loops and direct connection to 173X energy and power loggers.

Fluke I410 AC/DC current clamp adapter expands digital multimeters to measure 1A–400A AC/DC using Hall-effect sensing with 1mV/A output, enabling safe, non-intrusive current measurements.

Fluke SOL-DMM87V-KIT combines a high-efficiency PV I-V curve tracer with an 87V multimeter and 393 FC clamp meter for solar diagnostics.

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

Fluke i200 AC current clamp enables accurate 0.5–200A AC measurements using a multimeter. Features 1 mA/A output, banana plug interface, and CAT III 600V safety for electrical testing.