Search results for: 'low xao'

Fluke 368 FC clamp meter provides 1μA resolution, 60A leakage testing, wireless Fluke Connect logging, and a shielded 40 mm jaw for accurate troubleshooting.

3-1/2 digits 1999 counts 0.8% best accuracy Portable one-hand operation Data hold, low battery indication Max. jaw opening: 2 in.

AEMC 4630 Digital Ground Resistance Tester Kit: Rugged, accurate 0-2000Ω auto-ranging soil resistivity and ground testing with rechargeable NiMH battery.

AEMC 4630 Ground Resistance Tester Kit: Rugged, auto-ranging digital tester with 150ft leads, NiMH battery, and interference rejection for precise soil testing.

AEMC 4630 Ground Resistance Tester Kit with 500ft leads offers precise auto-ranging soil resistivity testing, rugged design, and rechargeable battery power.

AEMC MN01 AC current probe with 150A range and 1mA/A output. Compact design with 5 ft lead. Ideal for multimeters in low-power and secondary current applications.

Fluke FLK-289/FVF/IR3000 kit combines advanced logging, wireless sharing via Fluke Connect, and TrendCapture analysis for diagnosing complex electrical issues.

LEM USA HAL 200-S Current Transducer: Precision 200A Hall Effect sensing for industrial power systems. Compact, efficient, and high immunity to interference!

Fluke FLUKE-355 Clamp Meter: High-current True-RMS AC/DC measurements up to 2000A with wide jaw capacity, surge capture, and CAT IV safety for demanding electrical work.

The Fluke 87V/E2 CAL Industrial Electrician Combo Kit centers on the Fluke 87V true-RMS digital multimeter and includes essential accessories for industrial electrical measurement. This configuration includes NIST traceable calibration with data and supports AC/DC voltage to 1000 V, AC/DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF, frequency to 200 kHz, and temperature to 1090°C. Rated to CAT III 1000 V and CAT IV 600 V.

Fluke 117 Multimeter: True-RMS accuracy, non-contact voltage detection, and AutoVolt for faster AC/DC readings in demanding work environments.

Fluke 116 HVAC Multimeter: Built-in thermometer, microamps for flame sensors, True RMS accuracy, and bright backlight for fast HVAC troubleshooting.

Full assortment of test functions Precise ACV ACA True RMS Measurements Overload Protection Non-contact voltage detection LCD Display 3-5/6 5999 Counts DCV 600mV/6V/60V/600V ±（0.5% +5d） ACV 600mV/6V/60V/600V ±（1% +4d） TRUE-RMS DCA 60mA/600mA ±（1.2% +5 d）, 10A±（3.0% +5d） ACA 60mA/600mA ±（1.5% +5 d）, 10A±（3.0% +5d）TRUE-RMS Frequency 9.999Hz/99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz ±（1.5% +5d） Duty Cycle 21%~99%±（2.5% +5 d） ResistanceΩ 600Ω/6k/60k/600k/6M/60MΩ ±（0.8% +5d） Capacitance 60nF/600nF/6uF/60uF/600uF/6mF ±（4% + 5d）,100mF ±（4% +10d） Temperature(C/F) -20℃~1000℃±（1% + 3d） -4℉~2372℉±（1% + 3d） Continuity Buzzer ≤30Ω , buzzer beeps Diode Test Y NCV Detection Y Data Hold Y LED Light Y LCD Backlight Y Analog Bar Y Low Battery Indication Y Low Battery Indication Y Accessories Test Lead, K-type thermocouple, Manual Power 1.5V AAA x 3pcs (Not Included)

AEMC MN255 AC Current Probe: Switch-selectable 20A/200A ranges, 100mV/10mV output, banana plug lead, UL approved for precise low and high current use.

Fluke 28IIEX/ETL intrinsically safe multimeter built for hazardous sites, offering true RMS accuracy, IP67 protection, and full industrial measurement capability.

Fluke 381 clamp meter: Remote display and iFlex probe enable safe AC/DC current, voltage, resistance and frequency measurements in tight, noisy panels.

High-performance AEMC JM861 AC current probe with 3 ranges (30A, 300A, 3000A), low phase shift, BNC output, ideal for oscilloscopes & power quality analysis.

AEMC MTX 3291 Multimeter: Waterproof TRMS 60000-count multimeter with USB, backlit LCD, AC/DC measurement, temp, duty cycle & IP67 safety for rugged field use.

The AEMC SR601 AC Current Probe delivers 1000 A AC current measurement with a 1000:1 ratio, 1 mA/A output, and 4 mm banana jack connection for DMMs, loggers, and compatible instruments.

The Fluke 375 FC is a high-performance wireless clamp meter featuring True-RMS measurements, AC/DC current to 600 A (up to 2500 A with optional iFlex), voltage to 1000 V, VFD low-pass filter and remote data capability — designed for industrial diagnostics.

INNO Instrument SCTH1000 is a pass-through current sensor for DC 0–1000A and AC 1000Apeak measurement, with DC–300 kHz bandwidth, ±(0.05% of rdg + 15 μA) accuracy, DB9 interface, and ±15V to ±24V supply.