Search results for: 'value'

Fluke 1736/EUS logs voltage, current, power, and harmonics with flexible probes, Fluke Connect support, and Class IV safety for reliable three-phase energy analysis.

Fluke’s 1734/EUS is a three-phase electrical energy logger with Wi-Fi and flexible current probes, enabling continuous logging of voltage, current, power, energy, and power factor. Ideal for facility energy audits, load studies, and performance monitoring across distribution panels.

AEMC 6424 Ground Resistance Tester: Perform accurate 3-point testing with auto-ranging, LCD display, and color-coded terminals for easy hookup.

AEMC 2135.56 Model 6422 delivers digital ground resistance testing with direct-reading 2P and 3P measurement modes, auto-ranging operation, and a backlit LCD for fast field checks.

The AEMC DTR® Model 8511 Digital Transformer Ratiometer provides fast, automatic turns-ratio testing for power, VT/PT, and CT transformers. Features high excitation current, wide ratio range, DataView® software, and a rugged IP53 field design.

Fluke FLK-A3001FC KIT delivers wireless multimeter and iFlex current measurement with logging, remote monitoring, and seamless Fluke Connect integration.

The Fluke 283FC/PV enables safe 1500 V solar testing with TRMS accuracy, wireless current measurement, MC4 test leads, and logging for PV system diagnostics.

AEMC 6418 Clamp-On Ground Resistance Tester: Fast, clamp-on testing with memory, alarm, and no auxiliary rods—ideal for reliable earth measurements.

AEMC 607 True-RMS Power Clamp-On Meter: Measures AC/DC volts, amps, power, harmonics & InRush with Bluetooth logging and CAT IV safety.

Repl Shaft & Bearing, Small

Meet the Fluke 1734 Three-Phase Energy Logger – your go-to tool for easy, accurate energy monitoring. Track voltage, current, power, and more with WiFi connectivity and real-time data via the Fluke Connect® app. Perfect for spotting energy waste and optimizing your facility’s efficiency. Ready to take control of your energy use?

Fluke 435-II power quality and energy analyzer for Class A three-phase testing, with PowerWave capture, transient analysis, harmonics, flicker, mains signaling, energy loss measurement, and power distribution troubleshooting.

Megger MIT525 insulation resistance tester applying DC test voltages to 5 kV for evaluation of electrical insulation in cables, motors, transformers, and switchgear. Supports IR, timed IR, DAR, PI, dielectric discharge, stepped voltage, and ramp tests with onboard memory and USB data transfer.

Compact and lightweight pocket-size device LCD display Non-contact ACV detector LED flashlight Data hold Low battery indication DCV 4200mV/2V/20V/200V±(0.5%+3d) 600V±(0.8%+5d) ACV 2V/20V/200V±(0.8%+3d) 600V±(1.0%+5d) DCA 200μA/2000μA /20mA/200mA±(1.8%+5d) ACA 200μA/2000μA /20mA/200mA±(2.0%+5d) Resistance 200Ω/2kΩ/20kΩ/200kΩ/2MΩ±(1.0%+3d) 20MΩ±(1.2%+15d) Non contact ACV detector Y Diode test Y Continuity with beep Y Certificate RoHS, CE EN61010-1 CATIII 600V Battery 2x1.5V AAA

Fluke 381 clamp meter: Remote display and iFlex probe enable safe AC/DC current, voltage, resistance and frequency measurements in tight, noisy panels.

Introducing the OWON XDM3041 4-1/2 Digits Bench-Type Digital Multimeter: Precision Meets Performance.

Introducing the OWON HDS307S Handheld Digital Oscilloscope – A Compact Powerhouse of Versatility and Portability, Tailored Just for You.

Full assortment of test functions Precise ACV ACA True RMS Measurements Overload Protection Non-contact voltage detection LCD Display 3-5/6 5999 Counts DCV 600mV/6V/60V/600V ±（0.5% +5d） ACV 600mV/6V/60V/600V ±（1% +4d） TRUE-RMS DCA 60mA/600mA ±（1.2% +5 d）, 10A±（3.0% +5d） ACA 60mA/600mA ±（1.5% +5 d）, 10A±（3.0% +5d）TRUE-RMS Frequency 9.999Hz/99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz ±（1.5% +5d） Duty Cycle 21%~99%±（2.5% +5 d） ResistanceΩ 600Ω/6k/60k/600k/6M/60MΩ ±（0.8% +5d） Capacitance 60nF/600nF/6uF/60uF/600uF/6mF ±（4% + 5d）,100mF ±（4% +10d） Temperature(C/F) -20℃~1000℃±（1% + 3d） -4℉~2372℉±（1% + 3d） Continuity Buzzer ≤30Ω , buzzer beeps Diode Test Y NCV Detection Y Data Hold Y LED Light Y LCD Backlight Y Analog Bar Y Low Battery Indication Y Low Battery Indication Y Accessories Test Lead, K-type thermocouple, Manual Power 1.5V AAA x 3pcs (Not Included)

3 1/2 digits 1999 counts Dual slope A/D conversion Large backlit LCD display

AEMC Power & Energy Logger supports energy audits, power monitoring, load studies, alarms, reports, and multi-phase electrical system analysis.

AEMC PowerPad III power quality analyzer supports electrical diagnostics, power monitoring, harmonics, alarms, transients, and energy analysis for single- or three-phase networks.