Search results for: 'connections'

The Fluke I17XX-FLEX3KIP/4PK includes four 24 in (60 cm) flexible current probes rated to 3000A AC. Designed for use with Fluke 1742, 1746, and 1748 energy and power loggers, the probes connect directly to compatible 174x series instruments for current measurement display without scaling factors.

Fluke I400 AC Current Clamp Adapter enables safe, non-intrusive AC current measurement up to 400A using a digital multimeter. Compact design with 1 mA/A output and banana plug connection.

Fluke Solmetric PVA-1500 measures high-efficiency PV I-V curves up to 1500V and 30A with fast sweep times, wireless connectivity, and automated analysis.

Fluke 1777 Analyzer: Handheld three-phase power quality logging with automatic measurements, high-speed transients capture, and Bluetooth/Wi-Fi connectivity.

3 5/6 digits 5999 counts 0.5% best accuracy Dual display with analog bargraph Auto/Manual ranging USB data upload Measurement Range DC Voltage (DCV) 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+6d) AC Voltage (ACV) 6/60/600V ±(0.8%+10d), 750V ±(1.0%+10d) DC Current (DCA) 600μ/6000μA ±(1.0%+10d), 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) AC Current (ACA) 600μ/6000μA ±(1.5%+10d), 60m/600mA ±(1.5%+10d), 6/10A ±(2.0%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 100/1000Hz ±(0.5%+4d), 10k/100kHz ±(0.5%+4d), 1M/30MHz ±(0.5%+4d) Capacitance 40nF±(5%+30d), 400n/4μ/40μF±(3.5%+8d) 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.5%+15d) Continuity with Buzzer Yes Diode Test Yes Transistor Test Yes Power Source AAA(1.5V)×2pcs (Not included)

comemso Combined Mini-Charger-Tester HW Rev3.4 delivers fast portable CCS and CHAdeMO EVSE checks with touchscreen control, EV simulation, live results, and stored reports.

Fluke I410 AC/DC current clamp adapter expands digital multimeters to measure 1A–400A AC/DC using Hall-effect sensing with 1mV/A output, enabling safe, non-intrusive current measurements.

Fluke i17XX-FLEX3000 flexible iFlex current clamp measures up to 3000A AC and connects directly to Fluke 17XX Energy and Power Loggers, delivering accurate high-current measurement in tight spaces.

Fluke 1555 FC KIT insulation resistance tester delivers digital testing up to 10 kV with IR3000FC wireless connectivity, onboard data storage, and advanced diagnostic measurements for high-voltage electrical assets.

Fluke 190-104-III-S portable ScopeMeter oscilloscope delivers 100 MHz bandwidth, four isolated channels, and rugged field performance for industrial waveform analysis and troubleshooting.

Fluke 190-204-III is a 4-channel portable ScopeMeter oscilloscope with 200 MHz bandwidth, isolated inputs, WiFi and USB connectivity, built for high-voltage industrial signal troubleshooting.

Fluke SOL-DMM87V-KIT combines a high-efficiency PV I-V curve tracer with an 87V multimeter and 393 FC clamp meter for solar diagnostics.

100MHz, 2-channel portable oscilloscope performance with CAT IV safety, deep memory, and Connect-and-View triggering.

Fluke I2500-18 flexible AC current probe enables accurate 2500A measurements with thin Rogowski coil design for tight spaces and hard-to-reach conductors.

Fluke 1773/BASIC analyzer delivers automated three-phase power quality testing with fast transient capture, harmonic analysis, and flexible USB/Ethernet data transfer.

Fluke 190-504-III ScopeMeter: Rugged 500MHz, 4-channel portable oscilloscope with deep memory, USB/Wi-Fi, and CAT IV 600V safety rating.

FLUKE-190-202-III Portable oscilloscope for industrial troubleshooting with 2x USB, Wi-Fi, and long-lasting Li-Ion battery.

The Fluke 1775 Power Quality Analyzer combines high-speed data capture (1 MHz transient sampling) with automated power-quality measurements, intuitive touchscreen operation, and full three-phase logging—ideal for industrial, utility and renewable energy systems.

Fluke 287 multimeter: High-accuracy electronics logging with TrendCapture, real-time graphing, and Fluke Connect® compatibility for advanced diagnostics.

Fluke ScopeMeter: Rugged oscilloscope for industrial waveform analysis with LCD, USB, Wi-Fi, and rechargeable Li-Ion battery for field use.

Fluke 789 ProcessMeter: Compact digital multimeter with built-in mA loop calibrator for fast, accurate troubleshooting of control loops.

AEMC 6534 Digital Megohmmeter: Versatile insulation, voltage, resistance & continuity testing with memory, Bluetooth & backlit display.

AEMC 6610 Non-Contact Phase Meter: Detect phase rotation and open phases on 3-phase systems with LED alerts, buzzer, and a safe static induction design.