Search results for: '800'

Fluke I800 Clamp Probe: Extend DMM current measurement up to 800A AC with high accuracy, CAT III 600V safety, and wide 30Hz–10kHz frequency range.

AEMC 6422 Digital Ground Resistance Tester: Accurate 3-point ground testing with auto-ranging, backlit LCD, and easy hookup for reliable earth resistance measurement.

Phase 3 PowerSafe PD5-E: 800A sequential mating box for safe, error-free power distribution. Ideal for events, generators & industrial use!

INNO Instrument SCTX60 current sensor with 0-60A DC range, 60Apeak AC range, DB9 connection, 28 mm aperture, and DC-800 kHz measuring bandwidth for precision current measurement applications.

INNO Instrument SCTH60 current sensor with 0–60A DC range, 60Apeak AC range, 28 mm aperture, DB9 connector, and DC to 800 kHz bandwidth for precision current measurement.

The Amprobe ACDC-100 TRMS Clamp Meter delivers accurate AC/DC current, voltage, and resistance testing with True RMS, data hold, and backlit display.

INNO Instrument SPA6000 is a modular power analyzer with a 12.1-inch touchscreen, support for up to four input modules, 512GB internal storage, and AC/DC power measurement bandwidth from DC to 5MHz.

Built-in white LED illumination light Detect AC voltage 90~1000 VAC with no metal contact Compact size with clip fits into pockets or tool pouches Red LED and audible alarm if voltage is present Non-conductive outer surface to avoid high voltage shock Powered by two 1.5V AAA batteries (not included) CAT IV 1000V Safety rating

CAT III 1000V Safety rating No contact AC voltage detection from 12 to 1000 VAC No metallic contact Compact size with pocket clip Red LED Voltage level indication Audible alarm if voltage is present Built-in white LED light

Model No. MT-1210 Digits 3-1/2 digits 1999 counts Accuracy 1.0% best accuracy DCV 200mV/2V/20V/200V ±(1.0%+2d)500V ±(1.2%+5d) ACV 200/500V ±(2.5%+10d) DCA 200μ/2mA/20mA/200mA ±(2.0%+5d) 10A ±(3.0%+5d) Resistance 200Ω/2K/20K/200KΩ ±(1.0%+5d) 2MΩ ±(1.5%+5d) Extra function

The AEMC 2150.20 is a portable, battery-powered instrument that combines a 20 MHz two-channel isolated oscilloscope, dual 8000-count TRMS multimeter, power measurements, harmonic analysis (up to the 31st order), data storage, and USB connectivity for electrical diagnostics.

AEMC Replacement Carrying Case for 275HVD: Durable hard case with handle, designed for secure storage and transport of your high voltage detector.

Introducing the OWON XDS3104AE Touchscreen Digital Oscilloscope - Elevate Your Analysis

Experience unparalleled signal analysis with the OWON XDS3064AE Touchscreen Digital Oscilloscope. This advanced instrument is designed to enhance your analytical tasks, ensuring accuracy and convenience at every step.

Amprobe ACDC-100 clamp-on multimeter measures high AC/DC current with inrush capture, capacitance testing, and a large easy-to-read display.

Fluke 28 II Digital Multimeter: Rugged, IP67 waterproof and dustproof, with true-RMS readings, high-accuracy voltage, current, and temperature measurements.

Fluke 27 II delivers rugged industrial multimeter performance with IP67 protection, 3 m drop resistance, and accurate voltage, current, and capacitance testing.

INNO SPAW7000 Power Analysis Wavecorder with up to 7 power channels and 2 motor channels, supporting DC–5 MHz bandwidth, harmonic analysis to the 500th order, and high-accuracy power measurement.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

The Fluke LIQ-KIT-87-5 Electrical & Network Troubleshooter Kit combines the LinkIQ Cable+Network Tester, IntelliTone Pro 200 probe, and Fluke 87V Industrial Multimeter in a single field-ready solution. It qualifies copper cabling up to 10GBASE-T using frequency-based measurements, performs switch and Ping diagnostics, and validates PoE negotiation and load delivery. The integrated multimeter supports electrical troubleshooting across industrial environments.

Fluke 87V MAX multimeter: Rugged IP67 design, drop-tested to 4m, with True-RMS accuracy and built-in thermometer for extreme conditions.

AEMC OX 9102 IV Handheld Oscilloscope with 2 isolated channels, a 100MHz bandwidth, 7” color touchscreen, FFT, and a remote control via Wi-Fi & Ethernet.

AEMC OX 9062 IV 60MHz is a rugged handheld 2-channel oscilloscope with 60 MHz bandwidth, a 7-inch touchscreen, FFT, power measurement, and remote control via Wi-Fi and Ethernet.

AEMC MTX 3292B-BT Multimeter: TRMS 100000-count with Bluetooth, USB, color LCD, IP67, and full AC/DC, temp, freq & continuity testing.