Search results for: 'dual dual'

The Eagle Eye GFL-1000-CC is a dual current clamps set for the GFL-1000 Ground Fault Detector & Locator, designed for comparative tracing on parallel conductors and feeders without disconnecting circuits.

Fluke ACD-14 PLUS: Dual display clamp multimeter measuring AC/DC voltage, current, temperature, resistance, capacitance, and frequency with ease.

Amprobe ACD-14-PRO: TRMS clamp meter with dual backlit display, Amp-Tip precision, and low pass filter for HVAC and electrical diagnostics.

Toshiba MG150M2CK1 NPN power transistor module engineered for high-current switching. Designed for motor control and UPS systems, featuring an isolated case and dual-element bipolar architecture.

Fluke 123B/NA/S ScopeMeter: Rugged handheld oscilloscope with multimeter and recorder, dual-input testing, TFT display, USB, Wi-Fi, and rechargeable battery.

Fluke LVD2 detects AC voltage from 90 to 600 V with dual sensitivity and LED flashlight. Safe CAT IV 600 V rating for industrial and commercial use.

3 5/6 digits 5999 counts 0.5% best accuracy Dual display with analog bargraph Auto/Manual ranging USB data upload Measurement Range DC Voltage (DCV) 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+6d) AC Voltage (ACV) 6/60/600V ±(0.8%+10d), 750V ±(1.0%+10d) DC Current (DCA) 600μ/6000μA ±(1.0%+10d), 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) AC Current (ACA) 600μ/6000μA ±(1.5%+10d), 60m/600mA ±(1.5%+10d), 6/10A ±(2.0%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 100/1000Hz ±(0.5%+4d), 10k/100kHz ±(0.5%+4d), 1M/30MHz ±(0.5%+4d) Capacitance 40nF±(5%+30d), 400n/4μ/40μF±(3.5%+8d) 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.5%+15d) Continuity with Buzzer Yes Diode Test Yes Transistor Test Yes Power Source AAA(1.5V)×2pcs (Not included)

Fluke i200S AC Current Clamp delivers accurate non-intrusive AC current measurement from 0.5A to 240A using a BNC voltage output, ideal for multimeters, oscilloscopes, and power quality tools.

AEMC 6522 Digital Megohmmeter: Insulation, continuity, and voltage testing with a backlit dual display, test lock, and a timed measurement mode.

AEMC 2620 Leakage Current Probe: Detect low-level ground and differential faults with high accuracy, large jaw opening, and DMM compatibility.

Introducing the OWON VDS6102 PC Oscilloscope – Power and Precision in a Compact Package.

Introducing the OWON TAO3122A 2-Channel 14-bit 120MHz Tablet Oscilloscope

Introducing the OWON TAO3102 2-Channel 8-bit 100MHz Tablet Oscilloscope

Introducing the OWON VDS6102A PC Oscilloscope – Elevate Your Measurements with Precision and Versatility.

AEMC 6536 True Megohmmeter with variable 10-100V insulation testing, digital & analog display, continuity, resistance, and voltage measurements.

The AEMC 2150.20 is a portable, battery-powered instrument that combines a 20 MHz two-channel isolated oscilloscope, dual 8000-count TRMS multimeter, power measurements, harmonic analysis (up to the 31st order), data storage, and USB connectivity for electrical diagnostics.

Introducing the OWON TAO3072 2-Channel 8-bit 70MHz Tablet Oscilloscope

AEMC MN05 AC current probe with dual ranges 10A & 100A, voltage outputs 1mV/A & 1mV/mA, compact design with 5 ft lead for tight spaces and low current use.

Introducing the OWON SDS1202 Super Economical Type Digital Oscilloscope – Precision Redefined.

The Fluke T5-600/62 MAX+/1AC II kit combines voltage, current, and continuity testing with infrared temperature measurement and non-contact voltage detection. The kit includes the T5-600 electrical tester, 62 MAX+ IR thermometer, and 1AC II VoltAlert tester for electrical troubleshooting and inspection tasks.

Fluke 125B/NA/S Industrial ScopeMeter combines a 40 MHz oscilloscope, dual multimeters, and bus health testing for fast industrial troubleshooting.