Search results for: 'installed'

The ABB S271 K1A is a 1-pole miniature circuit breaker from the System pro M S270 series, rated at 1 A with a K tripping characteristic. It provides thermal overload and magnetic short-circuit protection and supports 230/400 V AC operation with a 6 kA breaking capacity.

Amprobe 30XR-A Multimeter: Accurate voltage, current, and resistance testing with VolTect non-contact detection, data hold, and manual ranging.

The ABB S271-K0.5A Miniature Circuit Breaker is a single-pole, DIN-rail mounted protection device from the System pro M S 270 series. It features a K-curve tripping characteristic with a 0.5 A rated current and 230/400 V AC rated voltage. Designed for cable and appliance protection, it provides thermal and magnetic trip mechanisms with a rated short-circuit breaking capacity of 6 kA in accordance with EN 60 898.

Amprobe DM73C Pen Probe Digital Multimeter delivers accurate 600V AC/DC readings with built-in probe, continuity beeper, and 3400-count display.

Fluke I410 AC/DC current clamp adapter expands digital multimeters to measure 1A–400A AC/DC using Hall-effect sensing with 1mV/A output, enabling safe, non-intrusive current measurements.

Fluke 325 Clamp Meter: Accurate 400A AC/DC True-RMS measurements with temperature, frequency, and resistance—ideal for electricians.

INNO SPAW7000 Power Analysis Wavecorder with up to 7 power channels and 2 motor channels, supporting DC–5 MHz bandwidth, harmonic analysis to the 500th order, and high-accuracy power measurement.

The Fluke 87V MAX True-RMS Digital Multimeter is designed for electrical measurement in demanding environments. It measures up to 1000 V AC/DC and 10 A AC/DC, with True-RMS accuracy for non-linear signals. This CAL version includes NIST traceable calibration with data, along with TL175 test leads, temperature probe, holster, and installed batteries.

AEMC 407 TRMS Clamp Meter: Measure AC/DC volts & amps, power, harmonics, THD, and record 1000 readings. Rugged, IP54, CAT IV 1000V safety rated.

Fluke 107 ESP pocket multimeter delivers 600V AC/DC testing, 10A current range, backlit display, data hold, and essential troubleshooting functions in a compact design.

INNO Instrument SPA6000 is a modular power analyzer with a 12.1-inch touchscreen, support for up to four input modules, 512GB internal storage, and AC/DC power measurement bandwidth from DC to 5MHz.

The Fluke 1663 is a complete electrical installation tester designed for professional contractors and maintenance teams. It performs insulation, continuity, loop impedance, RCD, and earth resistance tests, with onboard memory and software integration for streamlined reporting.

Fluke 1662 tester provides essential installation testing with insulation, continuity, loop, RCD and polarity checks, plus memory for storing onsite measurements.

AEMC C.A 6116N Installation Tester: Complete compliance testing with continuity, insulation, RCDs, loop, earth, power, harmonics & DataView® software.

AEMC C.A 6117 Installation Tester Kit with RCD, loop, insulation & ground tests. Ideal for industrial environments with USB & DataView® software.

AEMC C.A 6116N Multi-Function Tester Kit: Verify electrical installations with precision—includes DataView®, clamp, and all-in-one compliance testing.

Fluke FLK-393-IRR-PVLEAD solar PV test kit measures up to 1500 V DC, AC/DC current, and solar irradiance for safe photovoltaic installation and maintenance.

AEMC C.A 6117 Installation Tester: Precision testing with RCDs, loop, insulation, harmonics, B-type RCDs & voltage drop feature plus DataView® software.

AEMC C177A AC Current Probe: 5mA–200A range, 10,000:1 ratio, 6.5ft CA connector lead—designed for CA6116N & CA6117 installation testers.

Eagle Eye VGM-Series battery voltage and ground fault monitor with color touchscreen and Ethernet web interface for DC battery systems, delivering clear status monitoring and alarm output control.

Modicon AS-P120-000 delivers reliable 24VDC power for Compact 984 PLC systems, supporting stable control performance and legacy system continuity.

Fluke i17XX-FLEX6000 flexible 36-inch current clamp measures up to 6000A AC and connects directly to Fluke 17XX loggers for accurate, scalable-free current readings.

Eagle Eye GFM-100 battery ground fault monitor with color touchscreen, Ethernet web interface, Modbus TCP/IP, and 4 Form C contacts for real-time monitoring of DC battery systems.