Search results for: 'require'

HYTORC LST-2000 Lithium Series II torque tool with 36V battery drive, reaction arm, TorcSense torque measurement, and digital control interface for precision industrial bolting.

The Hydrajaws standard digital gauge provides many advantages over the standard analogue gauge including more accurate and clearer results.

The Hydrajaws standard digital gauge provides many advantages over the standard analogue gauge including more accurate and clearer results.

Drive: 1/2"/12.7mm Square Unit: N-m/lbf.in Dual units Torque Range: 60~340 N-m/ 52~243 lbf.ft Accuracy: +/-3.0 % Graduation: 2.0 N-m Gear teeth: 32 T OAL: 24"

The M35+ medium bridge is an optional extra that extends the Standard M35+ Digital Pull Tester to span 8.27 in and increases the capacity to 65kN (14,613 lbf). The leg height can also be extended with a further accessory set of 3 leg extensions

For testing Hex bolts when using the M2050 PRO Tester.

The Hydrajaws standard digital gauge provides many advantages over the standard analogue gauge including more accurate and clearer results.

For testing Hex bolts when using the M2050 PRO Tester.

Drive: 1/4"/6.3mm Square Unit: N-m/lbf.in Dual units Torque Range: 5.0~25 N-m/ 53~212 lbf.in Accuracy: +/-3.0 % Graduation: 0.2 N-m Gear teeth: 64 T OAL: 9.8"

The M35+ bridge leg extensions are an optional extra that extends the bridge's height capacity by 96mm.

Drive: 3/8"/9.5mm/ Square Unit: N-m/lbf.in Dual units Torque Range: 20~100 N-m/ 16.6~71.9 lbf.ft Accuracy: +/-3.0 % Graduation: 0.5 N-m Gear teeth: 32 T OAL: 17"

Drive: 1/4"/6.3mm Hexagon Unit: N-m/lbf.in Dual units Torque Range: 5.0~10 Nm Accuracy: +/-6.0% Graduation: 0.1 N-m/lbf.in OAL: 7.9"

The Hydrajaws standard digital gauge provides many advantages over the standard analogue gauge including more accurate and clearer results.

The new robust bridge for the M2050 Pro Tester is engineered to sustain a 50 kN (11,240.5 lbf) load. It features three adjustable legs with pin arrangements in four positions.

The New M2000 Tester bridge. New design has height adjustable legs for quick and easy adjustment to suit the testing application.

The 600mm adjustable load spreading bridge is ideal for testing the installation of Constant Force Posts. Made of aluminium, it is easy and efficient to assemble, operate and store. It features three 650mm legs, with composite feet for load spreading, which will rotate through 360 degrees and adjust to 23 height positions. Max SWL: 25 kN/5,620.2 lbf

The Hydrajaws Safety Post and Foundation Push Tester is designed to apply hydraulic pressure on a VRS safety post. This pressure is applied in increments through the use of a hand pump and its attached gauge. The distance between a set vertical datum and the safety post is then recorded at each stage.

Cordless 36 V industrial torque multiplier in the HYTORC Lithium Series II family. Configure your quote by selecting LST-2000 / 3000 / 5000 model, reaction fixtures, tool hanger, battery kit, and optional 3-year extended calibration.