Search results for: 'miniso stock'

Specifically for areas that require small, fine application work Lightweight and triangle-shaped plastic handle Heats up fast but requires less wattage Tips easy to change Safety stand included Optional replacement tips for various applications Parameter Value Voltage 110V-120V, 60Hz Consumption 20W Max. Temperature 770˚F±10% Heater Ceramic Heater Accessories Safety stand Tip Size Cone Shape, 4mm in diameter, Length: 19mm Power Cord A TYPE, SPT-1 Length: 5 ft Overall Length 6.6 in.

The Hydrajaws M0095 Long Stroke Roofing Screw Tester Kit determines the strength and suitability of fixings in built-up roofing constructions where performance data is unavailable. The long stroke of 3.15'' means that once tested the fixing can be completely extracted.

The Hydrajaws Safety Post and Foundation Push Tester is designed to apply hydraulic pressure on a VRS safety post. This pressure is applied in increments through the use of a hand pump and its attached gauge. The distance between a set vertical datum and the safety post is then recorded at each stage.

The M2008 Explorer Case provides an easy way to transport the heavy 145kN (32597lbf) M2008 Testing Kit. With its telescopic handle and tough wheels it makes getting around even the roughest of sites quicker and easier.

Drive: 1/2"/12.7mm Square Unit: N-m/lbf.in Dual units Torque Range: 40~200 N-m/ 33~144 lbf.ft Accuracy: +/-3.0 % Graduation: 1.0 N-m Gear teeth: 32 T OAL: 21"

The Hydrajaws Safety Lifeline Cable Tester Kit1 (Frame Only) for operators who already own an M2000 Tester, enables engineers to validate the installation of swaged components of new or existing engineered lifeline systems to ensure compliance with BS 7883 up to a maximum tensile load of 25kN.

1 x Hydrajaws Threaded Stud Adaptor

For M16 nuts, the bolt tester adaptor directly engages the nut in the pulling jaw.

For testing Hex bolts when using the M2050 PRO Tester.

Drive: 1/4"/6.3mm Hexagon Unit: N-m/lbf.in Dual units Torque Range: 0.1~1.2 N-m Accuracy: +/-6.0% Graduation: 0.01 N-m OAL: 7.1"

High quality bit at an economical price Made from S-2 tool steel with a hardness of HRC 59°~ 61°

The new robust bridge for the M2050 Pro Tester is engineered to sustain a 50 kN (11,240.5 lbf) load. It features three adjustable legs with pin arrangements in four positions.

The Hydrajaws Hydraulic Hollow Cylinder Tester Kit consists of a two-speed manually operated aluminium hand pump, digital gauge, 3m hose and either 180kN (40466lbf), 370kN (83179lbf) or 500kN (112405lbf) hollow bore aluminium cylinder which is more portable and weighs less than a traditional steel cylinder.

Hydrajaws Heavy Duty Threaded Stud Adaptor provides reliable anchor testing support for threaded sleeve and stud anchors, helping deliver accurate pull testing across compatible sizes.

For testing threaded fixings when using the M2050 Pro Tester

The standard red Hydrajaws Carrying case suitable for all M2000 and M2050 kits (filler ordered separately).

Looking for a reliable solution to test sleeve and stud anchors? Hydrajaws Threaded Stud Adaptors are your answer! Our adaptors are specifically designed to provide accurate and efficient testing of sleeve and stud anchors, ensuring the safety and stability of your structures.

For testing Hex bolts when using the M2050 PRO Tester.

Looking for a reliable solution to test sleeve and stud anchors? Hydrajaws Threaded Stud Adaptors are your answer! Our adaptors are specifically designed to provide accurate and efficient testing of sleeve and stud anchors, ensuring the safety and stability of your structures.