Search results for: 'operates an'

Compact, cordless design for portability Safety cap turns off device when in place Heats up to temperature in 15-20 seconds Temperature up to 450°C/840°F Maintains soldering temperature at least 300°C/600°F Lead free solder wire (Ø1mm ) included Requires 3 x AA Batteries (not included)

The Hydrajaws M0095 Long Stroke Roofing Screw Tester Kit determines the strength and suitability of fixings in built-up roofing constructions where performance data is unavailable. The long stroke of 3.15'' means that once tested the fixing can be completely extracted.

The Hydrajaws Wall Tie Tester Kit MK2 is used for testing all types of remedial wall tie. Trusted by market-leading companies, the Wall Tie Tester Kit is an essential tool for carrying out testing procedures in line with BRE Digest 401. Manufactured to exacting high standards, the Hydrajaws Wall Tie Tester Kit contains a small bolt tester adaptor and two threaded rod adaptors (M5 and M6) to test up to a maximum tensile load of 10kN. The three-legged load spreading bridge keeps reaction loads away from the fixing allowing results to be more consistent.

The Hydrajaws Hydraulic Hollow Cylinder Tester Kit consists of a two-speed manually operated aluminium hand pump, digital gauge, 3m hose and either 180kN (40466lbf), 370kN (83179lbf) or 500kN (112405lbf) hollow bore aluminium cylinder which is more portable and weighs less than a traditional steel cylinder.

The Hydrajaws Safety Lifeline Cable Tester Kit1 (Frame Only) for operators who already own an M2000 Tester, enables engineers to validate the installation of swaged components of new or existing engineered lifeline systems to ensure compliance with BS 7883 up to a maximum tensile load of 25kN.

The Hydrajaws Safety Post and Foundation Push Tester is designed to apply hydraulic pressure on a VRS safety post. This pressure is applied in increments through the use of a hand pump and its attached gauge. The distance between a set vertical datum and the safety post is then recorded at each stage.

High quality bit at an economical price Made from S-2 tool steel with a hardness of HRC 59°~ 61°

The standard red Hydrajaws Carrying case suitable for all M2000 and M2050 kits (filler ordered separately).

Drive: 1/2"/12.7mm Square Unit: N-m/lbf.in Dual units Torque Range: 40~200 N-m/ 33~144 lbf.ft Accuracy: +/-3.0 % Graduation: 1.0 N-m Gear teeth: 32 T OAL: 21"

The Hydrajaws Hydraulic Hollow Cylinder Tester Kit consists of a two-speed manually operated aluminium hand pump, digital gauge, 3m hose and either 180kN (40466lbf), 370kN (83179lbf) or 500kN (112405lbf) hollow bore aluminium cylinder which is more portable and weighs less than a traditional steel cylinder.

Drive: 1/4"/6.3mm Square Unit: N-m/lbf.in Dual units Torque Range: 5.0~25 N-m/ 53~212 lbf.in Accuracy: +/-3.0 % Graduation: 0.2 N-m Gear teeth: 64 T OAL: 9.8"

The 2008 heavy-duty load spreading bridge is for use with our Hydraulic testers and M2008 tester. Weight: 16 kg (35.3 lbs), SWL: 125 kN ( 28,101.1 lbf).

Hydrajaws 200-009 M2000 PRO Imperial Digital Tester Kit delivers 0-25kN/5620lbf pull testing for anchors and fixings with a digital gauge, 50mm stroke, and a universal adaptor set.

The Hydrajaws Hydraulic Hollow Cylinder Tester Kit consists of a two-speed manually operated aluminium hand pump, digital gauge, 3m hose and either 180kN, 370kN or 500kN hollow bore aluminium cylinder which is more portable and weighs less than a traditional steel cylinder.

he HYTORC LST-3000 Lithium Series II is a 36V battery-powered electric torque tool rated up to 3,000 ft-lb. It features a brushless DC motor, TorcSense™ direct torque measurement, and a high-resolution rear display for controlled tightening and loosening of industrial fasteners using conventional reaction-arm configurations.

Hydrajaws M0097 Tension Meter Tester: High-precision tool for testing wire ropes up to 40kN. Lightweight, durable, and comes with a robust carry case for easy transport.

For testing Hex bolts when using the M2050 PRO Tester.Hydrajaws 0.41" HD Slotted Button Adaptor is a robust and durable tool designed for specialized applications. 

Hydrajaws M2000 scaffold tie tester kit supports 0-25kN pull testing for scaffold anchors, with analogue and digital gauge options.

Looking for a reliable solution to test sleeve and stud anchors? Hydrajaws Threaded Stud Adaptors are your answer! Our adaptors are specifically designed to provide accurate and efficient testing of sleeve and stud anchors, ensuring the safety and stability of your structures.