Search results for: 'sites'

For attaching the tester to a secure anchor point to prevent it dropping to the ground. Includes a bungee tether, self-locking carabiner, a fixed anchorage plate and a PVC bag.

Revolutionize your anchor testing with the Hydrajaws M35+! This lightweight, modular pull tester features Easi-Effort® technology for anchor and eyebolt testing up to 35kN (7,868 lbf) and swaged components on engineered lifeline systems testing up to 20kN (4,496 lbf).

For testing Hex bolts when using the M2050 PRO Tester.Hydrajaws 0.41" HD Slotted Button Adaptor is a robust and durable tool designed for specialized applications. 

For use with the M2000 tester, the Wall Tie Spacer Bridge enables the testing of remedial wall ties when fitted with a threaded rod adaptor.

For testing Hex bolts when using the M2050 PRO Tester.

The Hydrajaws standard digital gauge provides many advantages over the standard analogue gauge including more accurate and clearer results.

Looking for a reliable solution to test sleeve and stud anchors? Hydrajaws Threaded Stud Adaptors are your answer! Our adaptors are specifically designed to provide accurate and efficient testing of sleeve and stud anchors, ensuring the safety and stability of your structures.

The Hydrajaws Safety Post and Foundation Push Tester is designed to apply hydraulic pressure on a VRS safety post. This pressure is applied in increments through the use of a hand pump and its attached gauge. The distance between a set vertical datum and the safety post is then recorded at each stage.

The M2008 Explorer Case provides an easy way to transport the heavy 145kN (32597lbf) M2008 Testing Kit. With its telescopic handle and tough wheels it makes getting around even the roughest of sites quicker and easier.

The Hydrajaws standard digital gauge provides many advantages over the standard analogue gauge including more accurate and clearer results.

Compact, cordless design for portability Safety cap turns off device when in place Heats up to temperature in 15-20 seconds Temperature up to 450°C/840°F Maintains soldering temperature at least 300°C/600°F Lead free solder wire (Ø1mm ) included Requires 3 x AA Batteries (not included)

The 2008 heavy-duty load spreading bridge is for use with our Hydraulic testers and M2008 tester. Weight: 16 kg (35.3 lbs), SWL: 125 kN ( 28,101.1 lbf).

Hydrajaws Heavy Duty Threaded Stud Adaptor provides reliable anchor testing support for threaded sleeve and stud anchors, helping deliver accurate pull testing across compatible sizes.

Cordless 36 V industrial torque multiplier in the HYTORC Lithium Series II family. Configure your quote by selecting LST-2000 / 3000 / 5000 model, reaction fixtures, tool hanger, battery kit, and optional 3-year extended calibration.

For M16 nuts, the bolt tester adaptor directly engages the nut in the pulling jaw.

The Hydrajaws standard digital gauge provides many advantages over the standard analogue gauge including more accurate and clearer results.

1 x Hydrajaws Threaded Stud Adaptor

The Hydrajaws M2000 Safety Harness & Eye Bolt Tester Kit is engineered for professionals who need to meet the demands of BS 7883:2019 for eye bolt anchor fixings used with personal fall protection and anchorage devices (BS EN 795). Compact, rugged, and easy to use, this complete kit delivers precise, repeatable test results whether on site or in the workshop.

Hydrajaws M2000 Material Bond Tester Kit brings precise 25kN pull-off testing to concrete, screeds, coatings, laminates, plastics, paints, and enamels in lab, workshop, and on-site workflows.

The Hydrajaws Pyramid Load Spreading Bridge offers greater stability and a wider area for unconfined testing on rough ground.

The Hydrajaws M35+ Large Bridge Expander is an essential upgrade for professionals who require enhanced load capacity, extended reach, and uncompromising reliability. With its 14,613 lbf (65 kN) Safe Working Load and 12.2 in. (310 mm) span, it enables precise, safe testing across a broader range of building materials.

The Hydrajaws Wall Tie Tester Kit MK2 is used for testing all types of remedial wall tie. Trusted by market-leading companies, the Wall Tie Tester Kit is an essential tool for carrying out testing procedures in line with BRE Digest 401. Manufactured to exacting high standards, the Hydrajaws Wall Tie Tester Kit contains a small bolt tester adaptor and two threaded rod adaptors (M5 and M6) to test up to a maximum tensile load of 10kN. The three-legged load spreading bridge keeps reaction loads away from the fixing allowing results to be more consistent.