Search results for: 'integrity'

Fluke Networks DSX-5000 Cable Analyzer: Fast, reliable certification for Cat 6A and fiber cables. Modular design, accurate results, and built for tough job sites.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

The INNO Instrument V7+ Fiber Cleaver supports single fiber 160µm–900µm, 2–3mm, and drop cable, plus ribbon fiber up to 12 cores. It features 2-step operation, blade pushback reclaim function, <0.5° typical cleave angle, and an integrated automatic shard collector.

The Fluke Networks LinkIQ LIQ-KIT-FQM-100MIC verifies 10G cable performance, tests switches and PoE, traces copper and fiber faults, and provides end-to-end network troubleshooting.

Fluke Networks DSX2-5-IE-K1: Fast, accurate Industrial Ethernet cable certification kit with LinkWare Live compatibility and Taptive touchscreen interface.

Fluke Networks Cable Analyzer DSX2-8000QI-NW – Advanced copper and fiber certifier supporting Cat 8 to 2000 MHz with Level 2G accuracy. Includes Quad OLTS for Tier-1 multimode/singlemode fiber certification. Non-wireless version of the DSX2-8000QI.

Fluke Networks DTX-1800-MS CableAnalyzer Cat 6A Fiber Kit supports Cat 6A/Class EA copper certification with SmartRemote operation plus multimode and singlemode fiber loss/length testing using DTX-MFM2 and DTX-SFM2 module capability.

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

The VeEX FX150 is a handheld optical time domain reflectometer configured with 1310 nm and 1550 nm singlemode wavelengths. The platform is capable of OTDR measurement, event analysis, trace review, and bundled Optical Power Meter (OPM), Optical Light Source, and Visual Fault Locator (VFL) operation for fiber testing workflows.

The Fluke DSX2-8000QOI is a full-kit Versiv 2 CableAnalyzer designed for both copper and fiber infrastructure certification—including Cat 8/Class I/II copper up to 2 GHz, quad OLTS fiber loss modules, quad OTDR fiber test modules, and fiber end-face inspection. Ideal for contractors and data-center teams needing one platform for high-performance copper plus advanced fiber test workflows.

Fluke Networks DSX2-8000-PRO/GLD CableAnalyzer Kit – Complete copper and fiber certification system. Supports Cat 8 to 2000 MHz with Level 2G accuracy and Quad OLTS for Tier-1 multimode/singlemode fiber testing. Includes FiberInspector, LinkWare™ Live, and 1-year Gold Support.

Upgrade your cable testing with the Fluke Networks DTX-CHA003 Coaxial Adapter-precise, reliable, and compatible with DTX Series certifiers! Get yours today and ensure top-quality network performance!

Power up your Fluke Networks Versiv with the 21CR19/66-2 Replacement Battery! Designed for optimal performance, this brand-new battery ensures your network testing tools are always ready for action.

Fluke Networks DTX-GFM2 Fiber Module: High-performance 850nm VCSEL & 1310nm FP laser for precise fiber testing. Compact, reliable, and perfect for cable analyzers.