Search results for: 'whol'

Used Waygate 57K0201P1 45° shear wave angle beam wedge designed for 0.50" ultrasonic transducers. Optimized for carbon steel inspections using Accupath series transducers. Fully tested, certified, and ready for immediate use.

Used Waygate 57K0203P1 70° shear wave angle beam wedge engineered for 0.50" ultrasonic transducers. Specially optimized for carbon steel inspections with Accupath series transducers. Thoroughly tested and ready for field deployment.

Wöhler VIS 700 HD Inspection Camera 7082 provides high-resolution inspection of pipes, ducts, and flue systems with a detachable 1.5 in pan-and-tilt camera head, adjustable focus, and a 100 ft push rod for extended reach.

Wöhler VIS 250 Inspection Camera delivers clear visual inspection for 1.5 in. and larger waste water pipes and ventilation lines, hollow spaces, and flue gas lines up to approx. 6 in., with a bright 7 in. display and electronic distance counter for fast diagnostics.

Certified pre-owned Sonatest PE-5.0M32E0.8P 5 MHz 32-element 0.8 mm pitch linear phased array ultrasonic probe. Delivers high-resolution imaging and dependable flaw detection for welds, pipelines, composites, and pressure vessels.

Certified pre-owned Sonatest T1-25.4T89D 1 MHz 25.4 mm twin compression membrane ultrasonic transducer, top exit Microdot connector—deep penetration and wide area coverage for flaw detection and corrosion mapping.

Certified pre-owned Sonatest FCG2525, 2.25 MHz 1/4" fingertip compression wave transducer with Microdot connector—medium damped for reliable flaw detection and thickness measurement in confined areas. Compatible with Sonatest Sitescan, Prisma, Veo+, and Masterscan flaw detectors.

Certified pre-owned Sonatest RDT1250 5 MHz 1/8" delay line compression wave ultrasonic transducer—high resolution with Microdot connector for ultra-precise flaw detection and thin-section inspection. Compatible with Sonatest Sitescan, Prisma, Veo+, and Masterscan flaw detectors.

The Wöhler VE 400 PLUS is a portable HD video borescope with a 5″ color monitor, waterproof probe (IP67), and interchangeable 0.15″–0.22″ cameras for access through openings from ~0.25″. Built-in LED illumination and SD-card image/video recording make it ideal for inspections in tight, hard-to-reach spaces.

Wöhler VIS 700 PLUS HD Inspection Camera delivers true-color HD inspection for drains, ducts, exhaust systems, and wastewater lines with a 7 in monitor, 100 ft push rod, and dual-head flexibility for standard and tighter sections.

Used Sonatest PSS50102W 2.25 MHz 1/2" x 1" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in industrial metals. High sensitivity and reliability. Fully tested and certified for precise NDT performance.

Certified pre-owned Sonatest T1-24.4T0D 1 MHz 24.4 mm twin compression membrane transducer with top exit Microdot connector. Delivers wide-area coverage and deep penetration for flaw detection and corrosion mapping in tough industrial environments.

Certified pre-owned Sonatest RB2050, 5 MHz 1/4" slimline rubber ball delay line ultrasonic transducer—features a rubber contact tip for excellent flaw detection and thickness inspection of contoured or coarse surfaces. Compatible with Sonatest Sitescan, Prisma, Veo+, and Masterscan flaw detectors.

Rohmann ELOTEST M2 LS V2 portable eddy current flaw detector with M2-LS Base Unit for Lift-Off Suppression. Firmware 2.10, dual-frequency operation, and M2-N14 analog architecture for reliable surface and subsurface inspection.

Olympus AM4R-20X22-45 is a 4 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 45° angle in steel and right angle LEMO 1 connector—high-resolution weld inspection and flaw detection capability.

Olympus AM2R-20X22-60 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector—ideal for weld inspection and flaw detection.

Olympus AM1R-20X22-70 is a 1 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 70° angle in steel and right angle LEMO 1 connector—ideal for deep-penetration weld inspection and flaw detection.

Used Waygate Technologies Gamma 2.25/50 0.50" straight beam ultrasonic transducer operating at 2.25 MHz. Medium pulse and bandwidth for general purpose flaw detection and material inspection, suitable for plates, forgings, pipes, and castings.

Certified pre-owned Technisonic CF-0204-GP, 2.25 MHz, 1/2" general purpose fingertip contact transducer—Microdot connector, perfect for flaw detection and thickness measurement in challenging or restricted areas. Compatible with major industry flaw detectors and gauges