Search results for: 'service'

Technisonic DFP-0504-GP is a dual element, fingertip ultrasonic probe with a 5 MHz frequency and 0.50" diameter designed for general purpose use. Features integral cable and BNC connector for reliable NDT testing.

The Wöhler VIS 260 Inspection Camera is a compact pipe inspection system for small-diameter lines. With a slim 1 in. camera head, 100 ft push rod, integrated transmitter, and sharp 7 in. TFT display, it helps technicians inspect, document, and locate issues quickly.

The Wohler VE 500 borescope delivers clear visual inspection for HVAC and plumbing professionals. Its IP67-rated camera probe withstands dust and moisture, making it ideal for ductwork, drains, and equipment interiors. With LED illumination and a high-resolution display, it ensures fast, reliable diagnostics in confined spaces.

Wöhler VE 400 HD Video Endoscope brings sharp 1280 x 720 inspection imaging to tight cavities through openings from 0.16", with a 5" display, Micro-SD recording, and a 0.22" 0°/90° HD probe for flexible viewing.

Used Sonatest FCG5025 2.25 MHz fingertip compression wave ultrasonic transducer with a 0.50" crystal diameter and side connector. Medium bandwidth for reliable flaw detection in castings, forgings, and thickness measurements. Fully tested and certified.

Used Waygate 57K0203P1 70° shear wave angle beam wedge engineered for 0.50" ultrasonic transducers. Specially optimized for carbon steel inspections with Accupath series transducers. Thoroughly tested and ready for field deployment.

Wöhler VIS 250 Inspection Camera delivers clear visual inspection for 1.5 in. and larger waste water pipes and ventilation lines, hollow spaces, and flue gas lines up to approx. 6 in., with a bright 7 in. display and electronic distance counter for fast diagnostics.

Used Sonatest SSG62622 2.25 MHz 5/8" x 5/8" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in industrial metals. High sensitivity with 4.4" nearfield length. Fully tested and certified for dependable NDT performance.

Certified pre-owned Sonatest D1-CABLE-S-QX2 2 meter phased array adaptor cable designed for D1S and D1A probes with Quick I-PEX connector—for seamless PAUT connection and reliable ultrasonic inspections.

Certified pre-owned Sonatest FCG5050 5 MHz fingertip contact compression wave transducer with Microdot connector—designed for precision flaw detection in castings, forgings, and thickness surveys. Compatible with popular Sonatest flaw detectors.

The Wöhler VE 400 PLUS is a portable HD video borescope with a 5″ color monitor, waterproof probe (IP67), and interchangeable 0.15″–0.22″ cameras for access through openings from ~0.25″. Built-in LED illumination and SD-card image/video recording make it ideal for inspections in tight, hard-to-reach spaces.

Used Sonatest PSS75752 2.25 MHz 3/4" x 3/4" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in metals. High sensitivity, wide bandwidth. Fully tested and certified for NDT reliability

Certified pre-owned Waygate 57K0202P1 60° shear wave angle beam wedge for 0.50" Accupath transducers. Engineered for accurate weld inspection and flaw detection in carbon steel per industry standards.

Used Sonatest PFC7525, 7.5 MHz 1/4" fingertip compression wave transducer for thin section flaw detection and precision thickness surveys on metals and castings. Compatible with Sonatest Wave, Sitescan D-50, Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

Pre-Owned Viken Pb200e handheld XRF lead paint analyzer with Co-57 (5 mCi) and 9/2025 reference date. Kit includes rechargeable batteries, rapid chargers, holster, battery magazine, check standard, shoulder strap, and hard case.

Olympus AM2R-20X22-60 is a 2 MHz, 20x22 mm angle beam shear wave ultrasonic probe (Atlas Series) with a 60° angle in steel and right angle LEMO 1 connector—ideal for weld inspection and flaw detection.

Used Sonatest PSS50102W 2.25 MHz 1/2" x 1" single crystal shear wave angle beam ultrasonic transducer with BNC connector. Designed for weld and flaw inspection in industrial metals. High sensitivity and reliability. Fully tested and certified for precise NDT performance.

Used Waygate 57K0204P1 90° shear wave angle beam wedge engineered for precision ultrasonic testing with 0.50" transducers. Perfectly suited for high-accuracy weld inspections, pipe evaluation, and specialized material testing. Fully tested and ready to deploy.

Elevate your inspections with our certified pre-owned GE Krautkramer USM 36 Ultrasonic Flaw Detector. Fully-equipped with advantageous features such as DAC, this tested and reliable solution is perfect for NDT applications. Portable and robust, it ensures accurate inspections in demanding industries including oil & gas, petrochemical, power generation, automotive, and aerospace. In stock and ready for delivery. Secure this advanced inspection tool for your team today!