Search results for: 'and and'

AEMC E94 AC/DC Current Probe: Compact, Hall-effect design with 100A range, zero DC reset, and auto recognition for PowerPad 8345 & PEL loggers.

AEMC MN05 AC current probe with dual ranges 10A & 100A, voltage outputs 1mV/A & 1mV/mA, compact design with 5 ft lead for tight spaces and low current use.

INNO Instrument SCTX200 pass-through current sensor with 0-200A DC range, 200A peak AC range, DB9 interface, ±12V to ±15V supply, and 28 mm aperture.

Flexible Rogowski AC current sensor with 24" loop, measures up to 30,000A. Dual output 1mV/A and 0.1mV/A. Waterproof IP65 sensor, shape memory design. BNC adapter #2118.46 required for BNC input.

AEMC AmpFlex® Rogowski coil current probe with 36" flexible loop. Measures up to 6000A AC with 1mV/A and 0.1mV/A dual output. Waterproof IP65 sensor. Requires adapter #2118.46 for BNC input.

AEMC SR193-BK AC Current Probe: 1200A capacity, 10ft lead, 0.3% accuracy—perfect for PowerPad, PEL Series, L104 & L564 for high-precision AC current measurement.

AEMC MN291 AC Current Probe: 200A range, 100mVDC/A output for DMMs or loggers, compact design with banana plug lead, ideal for DC voltage input instruments.

AEMC High-frequency flexible AC current probe with a 10" sensor, measuring 0.5A to 300A with 1% accuracy. Offers excellent frequency response up to 1MHz, low phase shift, and overload protection. Ideal for oscilloscopes with BNC input, power measurements, and confined spaces.

AEMC AmpFlex® flexible Rogowski coil sensor, 48" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

High-performance AEMC JM861 AC current probe with 3 ranges (30A, 300A, 3000A), low phase shift, BNC output, ideal for oscilloscopes & power quality analysis.

Flexible Rogowski AC current sensor with 120" coil length. Dual range 300/3000A AC with 100mV/A and 10mV/A output. Ideal for large bus bars and cable bundles. Compatible with DMMs, loggers, and power meters.

Fluke I410 AC/DC current clamp adapter expands digital multimeters to measure 1A–400A AC/DC using Hall-effect sensing with 1mV/A output, enabling safe, non-intrusive current measurements.

INNO Instrument SCTH1000 is a pass-through current sensor for DC 0–1000A and AC 1000Apeak measurement, with DC–300 kHz bandwidth, ±(0.05% of rdg + 15 μA) accuracy, DB9 interface, and ±15V to ±24V supply.

INNO Instrument SCTX1000 is a 1000A AC/DC pass-through current sensor with 30.9 mm aperture, DB9 connection, DC to 300 kHz bandwidth, and ±15V to ±24V supply requirement.

AEMC AmpFlex Rogowski coil sensor, 24" flexible design, measures AC current up to 1000A with 1mV/A output—ideal for tight, irregular spaces.

The Eagle Eye GFL-1000-CC is a dual current clamps set for the GFL-1000 Ground Fault Detector & Locator, designed for comparative tracing on parallel conductors and feeders without disconnecting circuits.

The Fluke I40S-EL3X/3PK Clamp-On Current Transformer 3 Pack is designed for low current measurement applications up to 40 A. Each transformer measures accurately on 1 A and 5 A secondary current transformers and clamps onto conductors up to 15 mm in diameter.

The Fluke I17XX-FLEX3KIP/4PK includes four 24 in (60 cm) flexible current probes rated to 3000A AC. Designed for use with Fluke 1742, 1746, and 1748 energy and power loggers, the probes connect directly to compatible 174x series instruments for current measurement display without scaling factors.

The Fluke I17XX-FLEX6000/4PK includes four 36 inch iFlex flexible AC current clamps rated to 6000 A AC. Designed for use with Fluke 1736 and 1738 Energy or Power Loggers, these Rogowski-style probes connect directly to the instrument and display measurements without scaling factors.

The Fluke I17XX-FLEX3KIP is a 24 in (60 cm) iFlex flexible current probe rated for measurements up to 3000A AC. Designed for use with Fluke 174x energy and power loggers, it connects directly for displayed current readings. The 2.5 m (8 ft) lead provides separation between the measurement point and the logger.

Fluke I5S-PR: Compact 5A AC current clamp delivers accurate, non-intrusive measurements for Fluke 1750 Power Recorder and ScopeMeter tools.

The Fluke i400s-EL-3PK AC Current Clamp 3 Pack extends the current measurement range of digital multimeters, power quality analyzers, and portable oscilloscopes. It supports measurements up to 400 A with selectable 40 A and 400 A ranges and 10 mV/A or 1 mV/A output. Rated CAT IV 600 V / CAT III 1000 V.

Amprobe CT235A AC/DC clamp transforms high current up to 1000A into safe millivolt signals for precise measurements with meters and data loggers.

AEMC AmpFlex 193-24-BK sensor measures current safely up to 12,000AAC with a flexible design that's compatible with Models 3945, 8220, 8230, and PEL Series products.