Search results for: 'it's of'

AEMC AmpFlex® Rogowski coil current probe with 36" flexible loop. Measures up to 6000A AC with 1mV/A and 0.1mV/A dual output. Waterproof IP65 sensor. Requires adapter #2118.46 for BNC input.

AEMC LM103 AC Current Probe, 200A range, 1mV/A output, 5 ft lead with banana plugs, 48 Hz–10 kHz frequency, compatible with power analyzers & DMMs.

AEMC AmpFlex Rogowski coil sensor, 24" flexible design, handles up to 3000A AC with 1mV/A output—perfect for tight and irregular conductor spaces.

Brass 294-06-06 fitting delivers secure 3/8 in hose barb to rigid tube shank connections using push-lock engagement. Designed for fluid transfer systems requiring reliable, non-swivel straight-through connectivity in a compact brass form.

INNO Instrument PTB03 is a three-phase wiring adapter box used as a test converter for switching three-phase connections during electrical measurement and power analysis workflows.

INNO Instrument PAC-1007 small alligator adapter pair with safety connector, rated 300V CAT II 15A, in red and black.

Pomona 1296 BNC male to dual stacking binding post adapter converts BNC test instruments to banana jack connections, supporting stacked binding posts for flexible laboratory and bench testing setups.

Pomona 2631 BNC Female to Minigator Test Clips breakout cable enables fast signal access from BNC male cables to minigator clips for bench and handheld electronic testing applications.

Pomona 2630 BNC female to alligator test clip adapter enables fast signal breakout from BNC cables to clip leads. Features 18 AWG PVC wire, gold-plated center contact, and durable molded BNC design.

Fluke Networks GLD3-CFP-SM-ADD Gold Support is a 3-year parts & labor maintenance plan for CFP-SM-ADD, providing repair service, parts replacement, software/firmware updates, and technical support access.

Emerson Fisher 38B6041X152 I/P Assembly Shroud Kit for FIELDVUE DVC6000 digital valve controllers, converting 4–20 mA control signals into proportional pneumatic output for accurate valve positioning.

Fluke 80PK-25 SureGrip Probe: Type K thermocouple for accurate liquid, gel, and food temperature readings from -40°C to 350°C (-40°F to 662°F).

The Wöhler 3853 Centering Brush Extension adds stable camera rod guidance for VIS inspection work, fitting all camera rods and mounting at any position on the rod for controlled movement in Ø 7.9" pathways.

Allen-Bradley 800E-3X10 is a latch-mounted normally open contact block for 22.5 mm 800E pilot devices, delivering reliable 10A switching for industrial control and signaling circuits.

AEMC MN94 AC Current Probe: Compact 200A sensor with 4-pin lead, 0.2 class accuracy—ideal for PowerPad 8345 & PEL52, meter checks, and power analysis.

AEMC AmpFlex Rogowski coil current sensor with a 36" flexible loop. Measures 100A and 1000A AC with dual 10mV/A and 1mV/A output. Ideal for tight, irregular spaces and large bus bars.

Cooper Bussmann MV055F1DAX100E is a 5.5kV full-range medium voltage fuse rated at 100A with 50 kA RMS symmetrical interrupting capacity for feeder circuit, switchgear, and transformer protection.

AEMC MN193-BK AC Current Probe: Dual range 5A/100A, measures from 5mA to 120A, 10ft lead—designed for PowerPad, PEL Series, L104 & L56 applications.

Appleton VU100M hazardous location incandescent luminaire delivers enclosed and gasketed 60–150 W A-21 lighting for wet and corrosive industrial areas requiring Class I, Division 2 performance.

Philips Advance AmbiStar RELB-2S40-N delivers reliable, energy-efficient rapid-start operation for T12 lamps. Ideal for 120V fixtures needing a dependable electronic ballast.

AEMC 2137.90 Power To Phase Adapter supplies PEL power and energy loggers from the phase power under test for extended 50/60 Hz monitoring on 600 V CAT III installations.

AEMC AmpFlex Rogowski coil sensor with 24" flexible loop. Measures 300A and 3000A AC with dual 10mV/A and 1mV/A outputs. Ideal for tight spaces and irregular conductor shapes.