Search results for: 'news'

AEMC 2620 Leakage Current Probe: Detect low-level ground and differential faults with high accuracy, large jaw opening, and DMM compatibility.

AEMC 400D-10 Digital FlexProbe® offers TRMS AC current up to 400A with 6ft lead, compact 10” sensor, ideal for tight spaces and industrial to residential use.

AEMC replacement set of 2 needle tip test leads, color-coded red/black with 4mm right-angle plugs. Rated 600V CAT IV shielded, fits meters 5212-5217.

Wöhler VIS 2xx / 3xx Battery delivers 12 V NiMH power, 2600 mAh capacity, and up to 120 minutes of operation for compatible VIS inspection camera systems.

The Wöhler 3853 Centering Brush Extension adds stable camera rod guidance for VIS inspection work, fitting all camera rods and mounting at any position on the rod for controlled movement in Ø 7.9" pathways.

The Fluke Networks DSX-PLA804 CAT 8/Class Permanent Link Adapter is a high-performance solution designed for certifying CAT 8 cabling systems up to 2 GHz. Compatible with the DSX CableAnalyzer series, it ensures precise permanent link testing for data center and high-speed network installations. This adapter supports emerging 25GBASE-T and 40GBASE-T applications, making it ideal for future-proofing copper cabling infrastructure.

AEMC 2118.84 Spring-Loaded Kelvin Probe Set delivers accurate low-resistance measurements using 4-wire Kelvin methodology. Featuring pistol-grip probes, 25A current rating, and 10.33 ft leads for use with compatible micro-ohmmeters.

Mersen A155F1D0R0-65E is a 15.5kV, 65E ferrule-mounted Amp-Trap CS-3 medium voltage fuse for transformer and distribution line protection. It is an E-rated, current-limiting, non-venting fuse with visual blown-fuse indication. 

ABB Thomas & Betts 7TAA005270R0015 is a Superstrut conduit strap assembly made of 12 gauge electro-galvanized steel for 3 inch rigid or IMC conduit, pipe, and electrical metal tubing.

INNO Instrument PTB01 is a single-phase wiring test adapter box used for switching single-phase circuits to support power coefficient measurement and related electrical testing workflows.

INNO Instrument PAC-1002 BNC conversion adapter for safety BNC to banana connection, rated 600V CAT III and listed as an accessory for the SPAW7000 power analysis wavecorder.

The INNO Instrument ACC-25-B Power Cable provides AC input connection for INNO Instrument devices that use the JS-180300 AC charging adapter. The cable connects the adapter block to a standard AC wall outlet and is used with compatible INNO Instrument OTDRs and fusion splicers.

The INNO Instrument LI-ION 225 is a lithium-ion replacement battery designed for use with the INNO Instrument View600 Optical Time Domain Reflectometer (OTDR). This battery provides portable power for field testing environments where the View600 OTDR is deployed for fiber optic network verification and troubleshooting.

Fisher 972-097-10-00 metal detector headphones with clear audio, individual volume controls, and 1/4" jack. Padded on-ear design enhances signal clarity and helps detect subtle tones in noisy environments.

Fisher 972-097-10-00 headphones provide clear audio with dual volume controls and 1/4" jack. Padded ear cups and stretchable cable enhance comfort and help detect faint signals during operation.

Fisher CASE-TW82HC hard case for TW-82 and TW-82P line tracers. Impact-resistant shell with custom foam protects transmitter, receiver, and accessories during transport and field use.

The INNO Instrument JS-1500 is a 12V DC AC power adapter and charger designed for INNO thermal strippers including the TS-PRO and TS-PLUS. It provides stable DC output for heater operation while recharging the internal battery.

The INNO Instrument JS-1618 AC Adapter is a 12.6V DC power supply engineered for the View 1, M7, M9, and A3 fusion splicers. It supports direct instrument operation and charging of compatible internal battery packs. The adapter accepts 100–240V AC input for global deployment and provides regulated 12.6V DC output at 1.8A.

The INNO Instrument JS-180300 is a 19V AC adapter and battery charger designed for INNO View series fusion splicers and compatible instruments. It provides 19V DC output at 3.42A with universal 100–240V AC input, supporting global mains standards. Desktop-style construction with attached DC output cable.

The INNO Instrument LBT-3000 is an 11.1V, 3000mAh lithium-ion battery pack designed for compatible INNO fusion splicers including the M7, M9, A3, IFS-15M, and IFS-15M+. It provides 33.3Wh capacity and features an integrated LED charge indicator for field power management.

The INNO Instrument LBT-52 is an 11.1V, 5200mAh (57.72Wh) rechargeable lithium-ion battery pack designed for INNO fusion splicers. It features an integrated LED battery level indicator for real-time capacity monitoring and supports approximately 3-hour charging.

The Inno Instrument USB-10P is a DC power cable featuring a USB Type-C connector on one end and a USB Type-A connector on the other. It is designed for powering and charging compatible Inno Instrument fiber optic equipment that utilizes a Type-C power input interface.

The INNO USB Type-C to USB Type-A (Female) Cable is an OTG adapter designed for INNO View-series fusion splicers equipped with a USB-C interface. It enables connection of standard USB-A peripherals such as flash drives, mice, or keyboards for data transfer and accessory operation.