Search results for: 'outputs'

AEMC 5000.57 Power Adapter 24VDC Charger: Reliable vehicle-use power adapter compatible with models 6470-B, 6471, and 6472 for seamless operation.

AEMC 2137.90 Power To Phase Adapter supplies PEL power and energy loggers from the phase power under test for extended 50/60 Hz monitoring on 600 V CAT III installations.

Fluke Networks VERSIV-TSET Versiv Headphones deliver wired, stereo audio with in-ear comfort for clear, distraction-free listening during testing tasks.

Banner 17268A LM5 adds adjustable on-delay timing to Banner Multibeam sensors for stable detection, jam prevention, and reliable automation performance.

AEMC MA114 MiniFlex® 14" Rogowski Coil — Flexible AC Current Sensor for Tight Spaces, Measures Up to 3000A, CAT IV 600V Rated

AEMC AmpFlex Rogowski coil current sensor with a 36" flexible loop. Measures 100A and 1000A AC with dual 10mV/A and 1mV/A output. Ideal for tight, irregular spaces and large bus bars.

The INNO Instrument FFLBT-50 is a rechargeable 11.1V lithium-ion battery pack rated at 3800mAh (42.18Wh). Designed for use with compatible INNO fusion splicers, it provides field-replaceable power in a compact integrated housing with built-in charge indicator.

The INNO Instrument DIN-18 is a DC power cable designed to connect compatible INNO TS-Pro or TS-Plus thermal strippers to the power output port of supported INNO View series fusion splicers. It enables field operation by allowing the thermal stripper to draw power directly from the splicer’s internal battery.

Fluke 80PK-10 pipe clamp temperature probe enables fast, repeatable surface measurements on 1.25–2.5 in pipes using a Type-K thermocouple, ideal for superheat and HVAC diagnostics.

The Autel Robotics EVO II Car Charger is a fast and reliable charging solution for your drone and remote controller on the go. Charge in just 90 minutes and travel with peace of mind.

The Saft LS33600 is a 3.6 V primary lithium-thionyl chloride (Li-SOCl₂) D-size battery designed for long-term, low-to-moderate current applications. It provides a nominal capacity of 17.0 Ah, stable voltage output, and a wide operating temperature range from −60°C to +85°C. This non-rechargeable cell is commonly used in utility metering, industrial electronics, and professional equipment.

ABB IEMMU21 module mounting unit designed for Infi 90 control systems, providing rear-mount chassis support, power distribution, and signal backplane connectivity for modular process control assemblies.

Flexible Rogowski AC current sensor with 24" loop, measures up to 30,000A. Dual output 1mV/A and 0.1mV/A. Waterproof IP65 sensor, shape memory design. BNC adapter #2118.46 required for BNC input.

AEMC AmpFlex® Rogowski coil current probe with 36" flexible loop. Measures up to 6000A AC with 1mV/A and 0.1mV/A dual output. Waterproof IP65 sensor. Requires adapter #2118.46 for BNC input.

AEMC High-frequency flexible AC current probe with a 10" sensor, measuring 0.5A to 300A with 1% accuracy. Offers excellent frequency response up to 1MHz, low phase shift, and overload protection. Ideal for oscilloscopes with BNC input, power measurements, and confined spaces.

Fluke TI-SBP3 rechargeable smart battery pack delivers 7.4V power for compatible Fluke thermal imagers, offering field-swappable convenience and extended runtime.

Fluke Networks LIQ-BATTERY lithium-ion replacement battery delivers reliable 3.5 V power for LinkIQ Cable+Network Tester and FI-3000 FiberInspector Pro.

Fluke 80PK-22 immersion temperature probe delivers reliable Type-K measurements for liquids and gels. Designed for wide temperature ranges and fast response when used with compatible thermocouple instruments.

Fluke BP7235 NiMH battery pack delivers reliable 7.2V power with 3500 mAh capacity, providing up to 16 hours of runtime for compatible Fluke calibrators.

Fluke C799 field soft case protects Fluke 75X series instruments while allowing keyboard access, test lead routing, and storage for modules and cables.

The INNO Instrument LBT-50 Battery Pack is a rechargeable 11.1V, 4200mAh Li battery designed for ARC fusion splicer platforms. It provides portable power support for field fiber optic splicing applications and integrates directly with compatible INNO Instrument splicer systems requiring the LBT-50 form factor.

Fluke PLS RBP5 rechargeable battery pack delivers extended runtime for compatible PLS laser levels, reducing downtime and eliminating disposable batteries while supporting multiple PLS handheld laser models.

Fluke BP190 rechargeable NiMH battery pack delivers 7.2V power for ScopeMeter 190, 190C, and 430 Series instruments, providing reliable internal power with OEM-matched fit and capacity.

Fluke BP120MH NiMH battery delivers 3000 mAh capacity and eco-friendly performance for 120 Series ScopeMeters and 43/43B Power Quality Analyzers.

Pomona BNC cable ensures noise-free signal transfer with gold-plated contacts, PTFE insulation, and durable molded strain relief for lasting performance.