Search results for: '2.0 2 20 8'

The INNO Instrument USB-8P is a USB Type-C to USB Type-A male cable designed for data connectivity with compatible INNO fusion splicers and related devices. It supports USB 2.0 communication for firmware updates, data export, and accessory interfacing in fiber optic splicing environments.

The Inno Instrument USB-5P is a USB 2.0 Mini-B (5-Pin) to Type-A cable designed for data transfer and PC connectivity with compatible Inno fusion splicers. It supports high-speed communication up to 480 Mbps and is commonly used for firmware updates and device interface.

Hubbell HBL2311 delivers a secure 20A 125V twist-lock connection for industrial equipment, featuring Insulgrip durability and compatibility with L5-20R devices.

Flexible Rogowski AC current sensor with 24" loop, measures up to 30,000A. Dual output 1mV/A and 0.1mV/A. Waterproof IP65 sensor, shape memory design. BNC adapter #2118.46 required for BNC input.

Hubbell HBL5366C Insulgrip plug delivers a durable 20A 125V NEMA 5-20P connection with a rugged nylon housing, adjustable cord clamp, and industrial-grade reliability.

Rohde & Schwarz FSH-Z1 true RMS terminating RF power sensor for 10 MHz–8 GHz measurements, providing accurate average power analysis and direct compatibility with FSH series handheld spectrum analyzers.

AEMC 2118.78 Kelvin probes bring crisp 10A low-resistance test contact with spring-loaded rotating tips, 4-wire measurement support, and 20 ft leads.

Rugged waterproof hard case in a 1550-class size with egg-crate lid foam, customizable pluck-foam base, pressure valve, reinforced hasps and dual latches for protecting tools, meters, cameras and electronics.

INNO Instrument PAC-1001 fork terminal adapter pair for connecting a standard 4 mm banana plug to a binding post terminal. Rated 1000V, CAT II, 20A. Includes red and black adapters.

INNO Instrument PAC-1003 is a screw-type safety adapter for compatible test cable connections, rated 600V CAT II and 20A, supplied in red and black.

The INNO Instrument LBT-8 is an 880mAh lithium-ion replacement battery designed for INNO TS Plus (TSP-0002 / TS-8+) and TS Pro thermal fiber strippers. It supports approximately 500 stripping cycles of standard 12-fiber ribbon cable in SAVE mode when fully charged. This listing includes the battery only.

Compact AEMC MN379 AC Current Probe with 5A & 100A ranges, 200mV/A & 10mV/A outputs, 10 ft lead, BNC connector, and 40 Hz–10 kHz frequency response.

AEMC MN94 AC Current Probe: Compact 200A sensor with 4-pin lead, 0.2 class accuracy—ideal for PowerPad 8345 & PEL52, meter checks, and power analysis.

AEMC AmpFlex® Rogowski coil current probe with 36" flexible loop. Measures up to 6000A AC with 1mV/A and 0.1mV/A dual output. Waterproof IP65 sensor. Requires adapter #2118.46 for BNC input.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.

The INNO Instrument JS-1618 AC Adapter is a 12.6V DC power supply engineered for the View 1, M7, M9, and A3 fusion splicers. It supports direct instrument operation and charging of compatible internal battery packs. The adapter accepts 100–240V AC input for global deployment and provides regulated 12.6V DC output at 1.8A.

The INNO Instrument LBT-30 is a 9000mAh lithium-ion rechargeable battery pack designed for INNO View series fusion splicers. Rated at 11.1V, it supports extended field operation and is compatible with View 7, 8+, 8 Pro, 8X, 12R, 12R Pro, IFS-10, and VIEW12R MAX models.

Pomona 6041B extra large alligator clip set delivers secure high-voltage test connections with integrated 4mm safety jacks, designed for IEC-compliant electrical measurement applications.

Philips Advance AmbiStar RELB-2S40-N delivers reliable, energy-efficient rapid-start operation for T12 lamps. Ideal for 120V fixtures needing a dependable electronic ballast.

INNO Instrument PTB02 is an external sensor connection fittings accessory identified in the SPAW7000 accessory catalog for power analysis wavecorder setups.

AEMC E94 AC/DC Current Probe: Compact, Hall-effect design with 100A range, zero DC reset, and auto recognition for PowerPad 8345 & PEL loggers.

Compact AEMC MN379T AC Current Probe with True RMS, 5A & 100A ranges, 200mV/A & 10mV/A outputs, 10 ft BNC lead, 40 Hz–10 kHz frequency response.

Fluke TL238 test lead kit enhances safety in high-energy environments with insulated probes, extenders, and silicone leads for secure multimeter connections.

The INNO Instrument ACC-25-B Power Cable provides AC input connection for INNO Instrument devices that use the JS-180300 AC charging adapter. The cable connects the adapter block to a standard AC wall outlet and is used with compatible INNO Instrument OTDRs and fusion splicers.