Search results for: 'rated max'

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

Pomona 1296 BNC male to dual stacking binding post adapter converts BNC test instruments to banana jack connections, supporting stacked binding posts for flexible laboratory and bench testing setups.

Pomona 5907A IEC 1010 DMM test lead kit delivers flexible, silicone-insulated 4 mm sheathed banana connections for Category III multimeter measurements with reliable contact and high safety compliance.

Pomona 5523 Minigrabber Patch Cord Kit includes ten 24-inch 20 AWG test leads with gold-plated minigrabber clips, providing secure temporary jumper connections for terminals and wire-wrap posts.

Fluke TL175E Test Leads: TwistGuard adjustable tips with WearGuard indicator for safe, flexible, and precise measurements in varied conditions.

The Pomona 6235 is an SMD microtip test probe set designed for probing surface-mount device contacts. It includes one red and one black 48-inch lead with curved, flexible stainless-steel needle tips to aid access to hard-to-reach areas while reducing risk of damage.

Pomona 5909A flexible DMM test lead set with right-angle 4 mm sheathed banana plugs, designed for safe, reliable multimeter connections in tight access measurement applications.

Fluke PM8907/830 Power Adapter provides reliable operation and charging for ScopeMeter 90/120 Series and Fluke 43/43B Power Quality Analyzers.

The INNO Instrument LBT-30 is a 9000mAh lithium-ion rechargeable battery pack designed for INNO View series fusion splicers. Rated at 11.1V, it supports extended field operation and is compatible with View 7, 8+, 8 Pro, 8X, 12R, 12R Pro, IFS-10, and VIEW12R MAX models.

Fluke AC285-FTP Clips: Secure, high-voltage alligator clips and adaptors for FTP-1 and FTPL-1 probes. 1000V rated, firm SureGrip design.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

Pomona Model 4555-0 is a do-it-yourself minigrabber test clip designed for hands-free electrical testing. It accepts wire diameters up to 0.144 in and uses a gold-plated beryllium copper contact with stainless steel spring. Supplied as a 10-piece black set.

Pomona 6041B extra large alligator clip set delivers secure high-voltage test connections with integrated 4mm safety jacks, designed for IEC-compliant electrical measurement applications.

The Saft LS33600 is a 3.6 V primary lithium-thionyl chloride (Li-SOCl₂) D-size battery designed for long-term, low-to-moderate current applications. It provides a nominal capacity of 17.0 Ah, stable voltage output, and a wide operating temperature range from −60°C to +85°C. This non-rechargeable cell is commonly used in utility metering, industrial electronics, and professional equipment.

AEMC 400D-10 Digital FlexProbe® offers TRMS AC current up to 400A with 6ft lead, compact 10” sensor, ideal for tight spaces and industrial to residential use.

AEMC LM102 AC Current Probe, 200A range, 1mA/A output, 5 ft lead with banana plugs, 48 Hz–10 kHz frequency, ideal for power analyzers and DMMs.

AEMC 2137.90 Power To Phase Adapter supplies PEL power and energy loggers from the phase power under test for extended 50/60 Hz monitoring on 600 V CAT III installations.

Arrow Pneumatics EK38 is a 40 micron sintered bronze particulate filter element kit for compatible MidFlow Arrow particulate filters, providing depth filtration and recleanable construction.

AEMC 4000D-24 Digital FlexProbe® with a 24” sensor and 6ft lead offers TRMS AC current measurement up to 4000A, compact and easy for tight spaces.

Pomona 3846 BNC female to female panel mount coupler with isolated ground, designed for secure panel installations requiring 50-ohm impedance and electrical isolation between shell and flange.

AEMC AmpFlex® Rogowski coil current probe with 36" flexible loop. Measures up to 6000A AC with 1mV/A and 0.1mV/A dual output. Waterproof IP65 sensor. Requires adapter #2118.46 for BNC input.

Philips Advance ICN-2P32-N Centium ballast delivers quiet, energy-efficient instant start operation for 1 or 2 F32T8 lamps in 120–277V commercial fixtures.

The IFM Efector E18212 offers a durable 2 m PVC sensor cordset with a 1/2" 3-pin female connector, delivering reliable, sealed connections for industrial automation.

AEMC MiniFlex® 30/300A flexible AC current probe measures up to 300A with high-frequency response, lightweight design, and compatibility with BNC oscilloscopes.

Square D LXD1G7/LXD3G7 provides a reliable 120V magnetic coil replacement for TeSys D contactors, ensuring dependable actuation and restored control performance.