Search results for: 'are witn'

Fluke Networks 26100103 replacement probe tips are designed for PRO3000 analog probes, ensuring reliable signal tracing in network testing tasks.

The Fluke AC280 SureGrip™ Hook Clips are a pair of nickel-plated electrical test clips designed for secure, hands-free measurements. Featuring a narrowing profile and controlled hook opening, they support precise connections and are rated up to CAT III 1000 V.

Fluke TP2 Slim-Reach test probe set includes one red and one black probe with 2 mm diameter stainless steel tips. Designed for probing closely spaced or recessed terminals, the probes are rated for 10 A and suitable for CAT III 1000 V and CAT IV 600 V environments.

AEMC 2152.12 Utility Test Lead Kit #3 delivers CAT-rated electrical test lead capability with silicone-insulated leads, screw-on probes, clips, grip probes, and spaded lugs for general electrical testing.

Fluke TP220 industrial test probes include one red and one black probe with sharp stainless steel tips for reliable electrical contact. SureGrip overmolded handles and a flexible finger barrier support steady probe placement during measurement tasks. Designed for use with compatible Fluke test leads.

The Fluke AC285 SureGrip™ Alligator Clips include one red and one black large alligator clip with nickel-plated steel jaws. Designed with rubber overmolded SureGrip surfaces, they provide a stable, comfortable grip for electrical testing. Rated CAT IV 600 V, CAT III 1000 V, 10 A.

The Fluke TL75 Hard Point Test Lead Set combines test lead and probe into a single unit for general-purpose electrical measurements. This set includes one red and one black PVC-insulated lead, each 48 inches long, with right-angle shrouded banana plugs and removable protective caps.

Fluke TL224 SureGrip insulated test leads include one red and one black lead with safety-shrouded standard diameter banana plugs. The leads feature a right-angle connector on one end and a straight connector on the other, reinforced strain relief, and silicone-insulated wire designed to resist heat and cold.

Amprobe TL35B test leads connect compatible meters to devices with PVC-insulated leads, threaded probe tips, and secure alligator clips.

The AEMC 2140.63 Test Lead Set pairs 10 ft color-coded electrical leads with red/black alligator clips for 8220/8230 replacement testing setups.

AEMC 2140.64 delivers a 10 ft, 4-lead color-coded replacement test lead set for AEMC 3945 and 3945-B power analyzers, with CAT IV-rated leads and alligator clips.

Hubbell HBL2611 twist lock plug provides secure, industrial cord connections to matching L5-30 locking receptacles for reliable, vibration-resistant power.

AEMC 2118.77 Kelvin Probes deliver 10A spring-loaded four-wire resistance testing with 10 ft leads for micro-ohmmeters using 4 mm safety terminals or 4–6 mm binding posts.

Fluke TPS VOLTPROBE 1K V voltage probe supports up to 1000 V measurements for Topas 2000 and Model 1760 power quality applications.

The Fluke TL1550EXT is a 25 ft extended test lead set designed for use with compatible Fluke insulation resistance testers. The set includes three color-coded leads with low-leakage probes and matching alligator clips, supporting extended reach during insulation resistance testing.

Eagle Eye IBEX 4-Point Test Leads for battery analyzers provide four-contact measurement for battery resistance and voltage testing with compatible IBEX systems.

AEMC 2135.39 ground rod set includes two 14.5 in T-shaped auxiliary ground electrodes for use with ground testers except clamp-on models.

Fluke Networks DSX-CHA004 CAT 6A Channel Adapter enables accurate channel certification with DSX2-5000 CableAnalyzer systems.

Pomona 5697-60 antenna cable delivers reliable 50 ohm BNC connectivity with gold-plated contacts and high-quality construction in a non-booted design.

The Fluke TP88 Rigid Back Probe Pin Set includes two fine-tip, rigid back probe pins designed for use with 2 mm test probes. The red and black insulated pins slide onto compatible probes and allow access between weather pack seals and wires. Tested to 60 V DC.

Fluke Networks 10300000 modular 8-wire cords provide reliable test access for telecom lines, available in standard or rugged K-plug versions. Pack of five.

Eagle Eye IBEX-Extended Arm Rod Set is a 30 in. LED-lit test lead extender designed for use with IBEX-Series testers to reach battery terminals in difficult locations.

AEMC 2129.92 Fuse Set: 12.5A, 500V fast blow fuses for Model 6240 Micro-ohmmeters. Reliable circuit protection in precision testing.

Fluke Networks FI1000-MPOAPC-UTIP probe tip with translator knob for FI-1000 video probe, ideal for inspecting MPO/MTP APC connectors on patch cords and bulkheads.

The Pomona 2708 Test Lead Holder is designed to organize and support wires up to 0.450 inch (11.43 mm) in diameter. It accepts RG 213 and RG 214 cable types and provides a structured method for managing test lead routing. Overall dimensions are 16.73 × 3.54 × 1.3 inches with a listed weight of 0.65 lb.