Search results for: 'new'

Schroff 20800-199 measuring adapter card enables configurable signal routing and interface mapping across Eurocard-based systems using integrated switch matrix architecture.

Woodhead 1152 is a closed-end, screw-release steel guard designed for use with Woodhead 130105 series hand lamps. Constructed from 8-gauge zinc-plated steel, it provides protective enclosure for A21 incandescent lamp assemblies in industrial environments. Replacement guard only.

Replacement USB cable (Type A to 5-pin Mini-B) for AEMC Simple Logger® II Series and Models DL-1080 and DL-1081. RoHS compliant.

AEMC 2137.82 Pole Mounting Kit supports pole mounting for AEMC PEL 105, PEL 115, and PowerPad 8435/8436 models, providing dedicated mounting hardware for compatible AEMC power logging systems.

Hubbell HBL4770C Twist-Lock plug delivers a 15A, 277V NEMA L7-15P grounding connection for 2-pole, 3-wire electrical use.

The Keyence OP-87406 is a 45 mm mounting screw designed to fix the dedicated adjustable bracket for the Keyence LR-Z Series self-contained CMOS laser sensors. It consists of a nickel-plated steel bolt with matching iron nut and washer, providing a secure fastening solution for compatible LR-Z Series sensor installations.

Fluke Networks 26501100 BNC-to-Alligator cable ensures reliable signal transfer between TS100/TS90 testers with durable copper conductors.

AEMC 5000.57 Power Adapter 24VDC Charger: Reliable vehicle-use power adapter compatible with models 6470-B, 6471, and 6472 for seamless operation.

AEMC HX0032 PRHX5 50 Ohm Adapter: Reliable connection for OX Oscilloscope Series. Precision built for seamless testing and accurate data capture.

Replacement Bluetooth USB adapter for AEMC SLII 4-channel loggers and Ground Tester Models 6417, 1510, and L452.

AEMC Banana (Female) to BNC (Male) adapter XM-BB, rated 600V CAT III, compatible with AmpFlex sensors, Models K100/K110, and SLII Data Loggers.

AEMC 2118.49 Adapter 110V Outlet with 4mm Banana Plugs: Designed for models L230, L260, L261, L481, L562, 6681, 8220, and 8230. Reliable and efficient.

AEMC 2119.45 RS-232 DB9 F/F 6 ft Null Modem Cable delivers PC connection support for AEMC 1060, 5060, 5070, 6250, and 6255 instruments.

The Gates 32CFHS G60899-0032 is a Code 61 SAE J518 split flange set used in high-pressure hydraulic systems. It is designed to connect ports directly to hoses and resist shock loads and vibration. The set includes two flange halves, an O-ring, and Grade 8 mounting hardware.

Fluke Networks FI1000-ADAPT-60 adapter adds a 60° angled camera tip for improved inspection access. Ideal for technicians working with tight or hard-to-reach fiber ports.

AEMC 2119.94 adapter converts BNC female to 4mm banana male connector, rated 600V CAT III. Perfect replacement for catalog number 2111.32.

Control Devices Style 260 is a 2 in. Dry Link dry disconnect adapter for bulk fluid transfer systems. It serves as the fixed adapter half of a dry disconnect coupling assembly used where controlled connection and separation are required.

GAI-Tronics 411A speaker mounting bracket assembly for wall mounting and positioning compatible speaker hardware, with bracket, adapter, conduit pipe, elbow, and gasket.

INNO Instrument PAC-1005 Safety Terminal-Mini Clip Adapter (Hook Type) for electrical measurement connections, confirmed as compatible with the SPAW7000.

The Fluke Networks NFA-MPO12P-KIT is a UniPort adapter kit designed for MPO 12 pinned fiber testing with the CertiFiber™ Max Optical Loss Test Set. It supports single-mode and multimode testing and enables standards-preferred one-jumper reference measurements while protecting the test port.

The Fluke Networks NFA-MPO16P-SM-OUT is a single-mode MPO-16 pinned main or remote output adapter for the CertiFiber™ Max Optical Loss Test Set. This field-replaceable UniPort™ adapter enables direct connection to MPO-16 pinned fiber cables while protecting the tester port during certification workflows.

Fluke Networks 4-Wire In-Line Modular Adapter: Test lines without service disruption, with clear markings, angled contacts, and easy probe access.

INNO Instrument PTB02 is an external sensor connection fittings accessory identified in the SPAW7000 accessory catalog for power analysis wavecorder setups.

INNO Instrument PAC-1004 Safety Adapter with safety connector and spring hold type. Rated 600V, CAT II, 10A, with red and black adapter components.