Search results for: '200 2'

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.

The GE DS200VPBLG1AFF is a VME P2 backplane board used in GE LS2100 and Load Commutated Inverter control systems. It provides centralized power and signal distribution across a 13-slot chassis, supporting DSPC, gate distribution, exciter, and I/O extender boards.

Allen-Bradley 1492-CB2 H 200 is a 2-pole DIN-rail supplementary circuit breaker designed for industrial control panels, providing reliable thermal-magnetic overcurrent protection with an H-curve trip characteristic.

The Siemens TA2J6500 is an aluminum body 2-barrel lug accessory for use with 2- or 3-pole 200A–400A JD and LD frame molded case circuit breakers. It supports copper conductors from 3/0 AWG to 500 kcmil and aluminum conductors from 4/0 AWG to 500 kcmil, and is suitable for both line and load side connections.

TP-Link MC200CM Gigabit Media Converter provides 1000BASE-T to 1000BASE-SX conversion over multimode fiber, supporting Gigabit Ethernet connectivity through an RJ45 port and SC fiber port.

Eaton FH80 overload relay heater element provides reliable thermal motor protection for A200/B100 starters, supporting accurate overload trip performance.

The Ferraz Shawmut UltraSafe USCC2 P216489 is a 2-pole modular fuse holder rated for 30A and 600 VAC/VDC for Class CC fuses. Designed for DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial control panel applications.

Eaton C0200E2AFB delivers 200 VA industrial control transformer performance with multi-voltage primary input and 120/115/110 V secondary output for control circuit power.

ABB S201-K1 miniature circuit breaker set consisting of two single-pole 1 A MCBs from the System pro M compact S200 series. Each breaker features a K tripping characteristic and is designed for DIN-rail mounting in AC or DC electrical installations.

The T.A. Systems EL-9060 is a sonic relay board module designed for industrial control applications operating on 24VDC. It is used to translate low-power control signals into higher-power switching actions within industrial automation and machinery control systems.

The Potter & Brumfield KUP14D15 is an enclosed electromechanical control relay with a 12 VDC coil and a 3PDT (3 Form C) contact configuration. This relay features an 11-pin blade terminal base and a clear polycarbonate dust cover for component visibility.

Bussmann JP60030-3PR is a 3-pole Class J pyramid fuse block rated 30 A and 600 V for panel-mounted circuit protection using LPJ, DFJ, and JKS fuses in control and power distribution assemblies.

Ferraz Shawmut (Mersen) USCC1 UltraSafe™ modular fuse holder for Class CC fuses. 1-pole DIN-rail mount design rated 30A and 600VAC/DC with 200kA SCCR. IP20 finger-safe protection, pressure plate terminals, and UL/CSA approvals.

Eaton DILM12-10 XTCE012B10A XT IEC contactor provides 12A three-pole full-voltage non-reversing control with 110–120 Vac coil, 1 NO contact configuration, and screw terminals.

Bussmann BPM275UL is a plug-in DIN rail surge protection module for 275 V systems, delivering 40 kA maximum surge current, 20 kA nominal discharge current, and local status indication for panel protection applications.

Leviton 4779-C delivers industrial-grade 15A, 277V NEMA L7-15R locking connectivity with grounding, screw termination, and rugged Black & White Series construction for dry electrical environments.

Eaton DILEM-10 XTMC9A10B XT IEC mini contactor delivers 3-pole full-voltage non-reversing control with an 8.80A rating, 20A continuous rating, 220–240 Vac coil, 1 NO contact configuration, and screw terminals.

Introducing the OWON SPE3102 200W DC Power Supply: Precision and Portability Redefined

Eaton Moeller PKZM0-10 manual motor controller delivers adjustable motor protection with rotary handle operation, phase-failure sensitivity, and ambient-temperature-compensated performance for motor control applications.

The Telemecanique XSAV32373 is an inductive proximity sensor designed for rotation monitoring applications. It features a cylindrical M30 nickel plated brass housing, 10 mm nominal sensing distance, PNP output with 1 NC function, and operates on 12 to 48 V DC. The sensor includes a fixed 2 meter cable connection and is rated IP67.

Introducing the OWON SPE6102 200W DC Power Supply: Precision, Portability, and Performance Unleashed

Littelfuse LPSC-ID is a Class CC fuse holder rated 600V AC/DC and 30A, built for panel protection with blown fuse indication, line/load labeling, and DIN rail mounting.

ABB SU201M-K6 miniature circuit breaker delivers 1-pole, 6 A branch circuit protection with K-curve tripping and AC/DC compatibility for control panels and distribution assemblies. 

The Ferraz Shawmut USCC3I is a 3-pole ULTRASAFE modular Class CC fuse holder rated for 600 VAC and 30 A. It accepts Class CC fuses only, incorporates integrated blown-fuse indicators, and mounts on standard 35 mm DIN rail for industrial electrical panels.

Littelfuse LPSC-ID is a 600 V AC/DC, 30 A Class CC fuse holder for branch circuit protection, combining dead front touch-safe construction, DIN-rail mounting, and blown-fuse indication above 80 V.