Search results for: 'deepcool a450 a a550 600'

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

The Allen-Bradley 800T-XA2 Series D is a 30 mm industrial control contact block featuring two normally open contacts and an A600 NEMA pilot duty rating. Designed for use with Bulletin 800T operators, it provides screw-terminal connections and base-mount installation for industrial control panels.

The Allen-Bradley 815-BOV4 is a manual reset overload relay designed for motor control applications. It provides thermal overload protection using a eutectic alloy mechanism and supports up to 27 A at 600 V AC. Suitable for use with Allen-Bradley motor control systems.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.

The Eaton Bussmann DFJ-30 is a 30A Class J high speed, current-limiting drive fuse designed to protect AC and DC drives and power semiconductor devices. Rated up to 600 Vac and 450 Vdc, it provides very low I²t let-through energy and high interrupting capacity for demanding industrial applications.

The Allen-Bradley 800S-R2SX is a standard-duty, two-position selector switch designed for surface-mount industrial control applications. It features a maintained ON/OFF knob operation, screw terminal wiring, and a NEMA Type 1 enclosure for general-purpose environments.

Allen-Bradley 1492-FB3C30-L is a 3-pole Class CC fuse holder for the 1492 Wiring System, rated 30A and up to 600V AC, featuring an integrated LED indicator for clear fuse status visibility.

Appleton ACP6044BC Powertite pin and sleeve plug delivers 60A 4-wire, 4-pole industrial power connection for portable or fixed equipment, with weatherproof performance up to 600 VAC, 250 VDC, and 50-400 Hz operation.

Eaton Moeller PKZM0-10 manual motor controller delivers adjustable motor protection with rotary handle operation, phase-failure sensitivity, and ambient-temperature-compensated performance for motor control applications.

Allen-Bradley 1492-FB2C30-L fuse holder delivers Class CC 30A protection with an LED fault indicator, DIN-rail mounting, and safe, compact industrial performance.

The Turck U-56934 is a Mini-Fast double-ended industrial sensor cordset designed for actuator and sensor connections in industrial automation environments. It features a straight male and right-angle female 7/8"-16 connector configuration, a 0.3 m cable length, and a yellow high-flex jacket.

Eaton C25BNF220A delivers reliable 20A motor switching with a 120V coil, ideal for HVAC, refrigeration, pumps, and industrial control panels.

Moore Industries TIY/PRG/4-20MA/12-42DC [DIN] is a programmable isolated thermocouple transmitter that accepts common thermocouple types and millivolt inputs and delivers a linear 4-20mA output with front-panel ranging, display indication, and self-diagnostics.

Honeywell GLFA33A2B is a MICRO SWITCH GLA Series industrial limit switch designed to EN50041 standards with 30 mm x 60 mm mounting. This configuration features a side rotary adjustable lever with steel roller, slow action break-before-make (BBM) 1NC/1NO contact arrangement, gold-plated contacts for low-energy applications, and an integrated yellow LED pilot light.

Allen-Bradley 100-D-S1-11 auxiliary contact block adds 1NO/1NC control contacts to 100-D series contactors, offering reliable screw-terminal expansion for industrial panels.