Search results for: 'full stok'

Fluke 750P27 Pressure Module: Precise, reliable pressure measurements with easy digital calibration and wide compatibility with Fluke calibrators.

Fluke MF-100 MultiFiber Pro Optical Power Meter (MFPOWERMETER) – Handheld OPM for MPO fiber trunks. Provides fast Tier-1 certification of loss, polarity, and continuity when paired with MultiFiber Pro light sources. Ideal for high-density data centers.

AEMC 2136.78 12V NiMH battery set for DTR 8510: Reliable rechargeable power, includes 2 units, built for high-performance test equipment needs.

Amprobe PM55A Pocket Multimeter offers AutoTect automatic AC/DC detection, non-contact voltage sensing, and versatile measurement functions in a compact design.

Full assortment of test functions Precise ACV ACA True RMS Measurements Overload Protection Non-contact voltage detection LCD Display 3-5/6 5999 Counts DCV 600mV/6V/60V/600V ±（0.5% +5d） ACV 600mV/6V/60V/600V ±（1% +4d） TRUE-RMS DCA 60mA/600mA ±（1.2% +5 d）, 10A±（3.0% +5d） ACA 60mA/600mA ±（1.5% +5 d）, 10A±（3.0% +5d）TRUE-RMS Frequency 9.999Hz/99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz ±（1.5% +5d） Duty Cycle 21%~99%±（2.5% +5 d） ResistanceΩ 600Ω/6k/60k/600k/6M/60MΩ ±（0.8% +5d） Capacitance 60nF/600nF/6uF/60uF/600uF/6mF ±（4% + 5d）,100mF ±（4% +10d） Temperature(C/F) -20℃~1000℃±（1% + 3d） -4℉~2372℉±（1% + 3d） Continuity Buzzer ≤30Ω , buzzer beeps Diode Test Y NCV Detection Y Data Hold Y LED Light Y LCD Backlight Y Analog Bar Y Low Battery Indication Y Low Battery Indication Y Accessories Test Lead, K-type thermocouple, Manual Power 1.5V AAA x 3pcs (Not Included)

Industrial multimeter service kit combining the Fluke 179 True-RMS digital multimeter and Fluke 323 True-RMS clamp meter. Designed for troubleshooting electrical and electronic systems, with voltage measurement up to 1000 V AC/DC and AC current measurement up to 400 A.

Fluke 787B ProcessMeter combines a safety-rated digital multimeter with mA loop calibrator functions, enabling accurate measurement, sourcing, and simulation for industrial current loop troubleshooting.

Fluke Networks 44210015 wire stripper delivers clean 22/24 AWG insulation stripping with dual slots, cutter, and reliable performance for telephone installers.

The Pomona 6341 Precision Electronic Probe Kit includes one red probe and one black probe with a full set of five replaceable tip styles. The miniature probe design supports probing of high-density circuits. Gold-plated pogo pin tips maintain constant pressure on test points for consistent readings. Silicone insulated 20 AWG leads provide flexibility and temperature resistance. Rated for 1000 VRMS and 3 A.

Fluke FI-3000TP AMPO 12-32 adapter tip enables MPO APC 12–32 fiber inspection with FI-3000, supporting 400G readiness and multimode APC connectors.

Fluke Networks OptiFiber Pro HDR OTDR: Enterprise-ready singlemode fiber-optic tester with HDR range, macrobend detection, and advanced PON testing capability.

The Fluke 1775 Power Quality Analyzer combines high-speed data capture (1 MHz transient sampling) with automated power-quality measurements, intuitive touchscreen operation, and full three-phase logging—ideal for industrial, utility and renewable energy systems.

Fluke TiX580 Infrared Camera: High-resolution thermal imaging with 5.7" touchscreen, LaserSharp® autofocus, and SuperResolution for precise analysis.

Amprobe AMP-220 Clamp Meter delivers accurate 600A AC/DC measurements with True-RMS, Amp-Tip, backlit display, and non-contact voltage detection.

Westinghouse Emerson 5X00226G02 Ovation I/O Interface Module delivers rack-mounted digital signal interfacing for Ovation DCS platforms, supporting controller communication with field-connected sensors and actuators in industrial control environments.

Fluke Networks DSX2-8000-PRO CableAnalyzer Kit – Complete copper and fiber certification system. Certifies Cat 8/Class I & II copper with Level 2G accuracy plus Tier-1 multimode/singlemode fiber using Quad OLTS. Includes FiberInspector probe.

Digi-Pas DWL80E digital level delivers pocket-size angle and slope measurement with 0.1° resolution, magnetic placement, HOLD reading capture, and user self-calibration for precise alignment work.

Fluke Networks DSX2-8000OI/GLD kit: Certify, inspect, and troubleshoot fiber/copper links with Wi-Fi and 1-year Premium Gold Care coverage.

Introducing the OWON XDG2100 Arbitrary Waveform Generator – Precision and Versatility at Its Peak.

The Appleton ST-4575 is a 3/4" 45° liquidtight connector designed for use with liquidtight flexible metal conduit (LFMC). This ST Series plain throat fitting provides a dependable connection while sealing out oil, water, dust, dirt, and fumes. Constructed with a malleable iron body and finished with zinc electroplate, chromate, and epoxy powder coat, it is suitable for wet locations and Class I, Division 2 environments.

The KAMAN Sensors digiVIT 855949-000 is a self-tuning digital driver for non-contact inductive and eddy current position and displacement sensors. It features pushbutton calibration, embedded intelligence, selectable analog outputs, and Ethernet connectivity for monitoring and parameter switching.

Fluke T+PRO-1AC combines a full-featured electrical tester with a non-contact AC voltage detector for safe AC/DC testing, continuity checks, GFCI testing, and fast live circuit detection.