Search results for: 'installed'

Fluke Networks 44210013 double-slotted stripper for 22/24 AWG JKT station wire with built-in cutter, delivering clean insulation removal for telecom installers.

Steel City RS 2 surface cover provides a durable, galvanized finish for mounting a toggle switch and duplex receptacle on 4" square boxes in exposed installations.

Fluke Networks 44210015 wire stripper delivers clean 22/24 AWG insulation stripping with dual slots, cutter, and reliable performance for telephone installers.

Steel City RSL 8 raised device cover provides a durable, galvanized 4-11/16" square solution for mounting two duplex receptacles in commercial installations.

The Fluke CV400 is a 4 in (95 mm) infrared window with hand turn door latch for electrical panel inspection. It features a ClirVu coating system, AutoGround functionality, IP67 rating, and a 63 kA arc-blast rating tested at KEMA. Designed for quick installation without removing the panel door.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.

Fluke Networks JR-LEV-2-H replacement blade head supports Leviton Cat 5e and Cat 6 jacks for fast, precise JackRapid punchdown termination.

Fluke Pro-Tool Kit IS60: Complete cable installation and repair kit with impact tool, snips, stripper, Maglite, and durable carrying pouch.

The Inno Instrument UN1CO Backpack is designed for FTTH installers who require organized transport of splicing equipment and field tools. With a reinforced equipment compartment and three internal storage pockets, the UN1CO supports structured tool management.

The PLS 180G Z is a self-leveling green cross line laser designed for framing, acoustic ceiling installation, tile installation, and general construction layout. It projects horizontal and vertical lines with wide fan angles for interior layout applications.

The INNO Instrument LI-ION 220 is a 7,800mAh rechargeable lithium-ion battery designed for the INNO Instrument View 500 Optical Time Domain Reflectometer (OTDR). It provides portable field power for fiber optic testing operations and supports extended operation of the View 500 platform during installation.

AEMC C.A 6116N Installation Tester: Complete compliance testing with continuity, insulation, RCDs, loop, earth, power, harmonics & DataView® software.

Push-On For RG6 Cable 10 Connectors

The Georg Fischer Signet 3-8510 is an integral-mount paddlewheel flow sensor designed for use in liquid flow measurement applications. This sensor is part of the GF Signet flow measurement platform and is intended for installation within compatible piping systems to generate a flow-proportional signal.

ASEA RXIL 2 plug-in protection relay, model RK 412 112-AC, from the COMBIFLEX system. This module features a front rotary adjustment dial and plug-in rear pin interface, designed for installation in compatible COMBIFLEX relay systems.

Fluke Networks CIQ-SPKR speaker wire adapter enables accurate speaker cable qualification when used with the CableIQ qualification tester.

Thomas & Betts Red Dot 2CCD weatherproof two-gang duplex receptacle cover delivers die-cast metallic protection for dual duplex outlets with gasketed sealing and device-mount installation.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

LAN and telecom, 4 pairs UTP (24 AWG) 110 type cable side and cross-connect side terminal blocks Interchangeable termination block heads One end for seating and cutting off wires Other end for seating wires only

Fluke Networks D914S Impact Tool delivers high-quality terminations with ergonomic design, torque-impact combo, and built-in hook and spudge

Fluke DSX-PC6AS Network Adapter: Shielded RJ-45 male connector ensures reliable, easy-to-install network cable connections for professionals.

Measure temperature (F or C), relative humidity, and dew point before, during, and after your flooring installation and woodworking applications.