Search results for: 'one stock'

Airpax UPL111-25620-1 is a 3-pole magnetic-hydraulic circuit breaker for panel-mounted power switching and circuit protection in commercial and industrial equipment.

Turck MK91-12-R/115VAC is a 1-channel level controller for electrode-based level monitoring with 115VAC supply, relay output switching, and adjustable operating settings for control tasks.

B-Line B2010 conduit hanger strut clamp secures 1-inch conduit to standard strut systems with a durable two-piece steel design. Supports reliable pipe mounting with secure fastening and corrosion-resistant zinc finish.

ENM MT101R is a self-powered electric motor hour meter for AC or DC motors. It uses an external sensor on a 4 ft cable to detect motor magnetic field and display true motor run time.

Johnson Controls P10BC-7C low pressure control, SPDT, 1-stage, 3 to 20 psi range, 12 psig factory setting, 2 psi switch differential, with barbed fitting.

Westinghouse Emerson 5X00226G01 is an Ovation I/O Interface Module for distributed control system signal interfacing, data acquisition, and communication between the control system and connected field devices.

Swagelok SS-4BHT-12 is a T Series PTFE-lined stainless steel braided hose assembly with dual 1/4 in. Swagelok tube adapters. It features a 14 in. hose length with 10.2 in. live length and a temperature range of -65°F to 450°F.

The Fluke 1587T Insulation Multimeter combines a digital insulation tester with a true-rms digital multimeter in one handheld instrument. Designed for telecom applications, it provides 50 V and 100 V insulation test voltages along with AC/DC voltage, millivolt, milliamp, resistance, and continuity measurements.

The Fluke I17XX-FLEX6000/4PK includes four 36 inch iFlex flexible AC current clamps rated to 6000 A AC. Designed for use with Fluke 1736 and 1738 Energy or Power Loggers, these Rogowski-style probes connect directly to the instrument and display measurements without scaling factors.

The Fluke I17XX-FLEX3KIP is a 24 in (60 cm) iFlex flexible current probe rated for measurements up to 3000A AC. Designed for use with Fluke 174x energy and power loggers, it connects directly for displayed current readings. The 2.5 m (8 ft) lead provides separation between the measurement point and the logger.

Fluke Networks GLD-DSX2-5-IE-K1 provides 1 Year Gold Support for the DSX2-5-IE-K1. The service includes annual calibration and factory refresh, repair with parts and labor, loaner equipment, accessory replacement, 24x7 technical support, knowledge base access, software and firmware updates, and member-only promotions.

Fluke Networks GLD-FI-3000 provides 1 Year Gold Support for the FI-3000 FiberInspector Pro. This service plan includes 24/7 technical support, repair coverage with parts and labor, annual calibration and factory refresh, loaner equipment service where available, accessory replacement for qualifying items, and access to software and firmware updates.

The Fluke 179 True-RMS Digital Multimeter Electronics Kit supports electrical and electronic troubleshooting with voltage, current, resistance, frequency, capacitance, continuity, diode, and temperature measurements. The kit includes SureGrip accessories, a magnetic hanger, and a soft carry case for organized field use.

Fluke Networks TRC-SM-VERIFY-MMC16U is a reference-grade single-mode verification test reference cord for CertiFiber™ Max optical loss testing. It is a 1 m, 16-fiber, Type A MMC cord with APC/U connectors, used to verify proper reference setup accuracy.

The Mitsubishi CP30-BA 1-Pole 3A M-Curve Circuit Protector is a compact hydraulic-magnetic supplementary protector designed for low-capacity control circuits. It supports AC 250 V and DC 65 V operation, offers 2.5 kA breaking capacity, and mounts on standard DIN rail using screw terminals.

Fluke Networks REMOTEID-KIT enables fast remote cable identification with MicroScanner PoE testers. Includes numbered IDs #2–7 for tracing RJ45, Ethernet, telephone, and CATV cabling layouts.

Fluke Networks TRC-MPO-UU-B MPO to MPO fiber optic test cord delivers reliable Type B polarity connectivity for MultiFiber Pro optical power meters and fiber test kits.

Fluke T6-1000PRO electrical tester uses FieldSense technology to measure true RMS AC voltage and current up to 1000V and 200A through an open fork for faster, safer troubleshooting.

Fluke Networks NFA-CFM-SC is a duplex SC input adapter for CertiFiber Max optical loss test sets, enabling accurate power and loss testing while protecting the instrument port with a field-replaceable design.

Fluke I17XX-FLEX1500 iFlex flexible AC current clamp measures up to 1500A AC and connects directly to compatible Fluke power and energy loggers, enabling easy installation on large conductors.

Fluke Networks SRC-9-SCST-KIT singlemode test reference cord kit for accurate fiber loss testing. Designed for ST-terminated fiber links using SC/ST and ST/ST reference cords with Fluke CertiFiber Pro.

The Advance L-220-F is a magnetic reactor ballast designed to operate two 15W or 20W preheat fluorescent lamps at 120V AC, 60 Hz. It regulates lamp current using an inductive core and requires external starters for lamp ignition in preheat fluorescent systems.

Fluke Networks SRC-9-SCSC-KIT is a singlemode SC/SC test reference cord kit designed for accurate fiber testing with Fluke Networks testers. Includes four 2-meter SC-terminated reference cords.

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

Fluke Networks D914S is a professional SoftTouch impact tool with EverSharp 66 and 110 blades, delivering precise punchdown terminations with adjustable impact force, built-in hook, spudger, and torque capability.