Search results for: 'connection'

Siemens POL906.00/MCQ Communication Module supports POL6xx-connected control architecture in a compact modular format, with visible LON-SCC identification plus on-product IP20, -40 to 70, 80 mA, and 0.4 W markings.

Bently Nevada 330930-060-02-00 is a 3300 XL NSv 6.0 m extension cable for proximity transducer systems. One cable assembly is included, as shown.

Westinghouse Emerson 5X00226G01 is an Ovation I/O Interface Module for distributed control system signal interfacing, data acquisition, and communication between the control system and connected field devices.

Fluke Networks ADP-MPO16/32-A MPO adapter coupler for verification and testing of 16 or 32 fiber APC MPO cables, designed for reliable connection, inspection, and use with CertiFiber Max systems.

The Turck B8241-0/PG9 is a field-wireable M12 right-angle, 4-position female connector designed for sensor and actuator wiring in industrial automation. It uses a screw terminal connection, supports 250 V at 4 A, and accepts PG9 cable glands for secure, sealed installations.

Fluke 700TC1 thermocouple mini-plug kit includes 10 connector types for terminating thermocouple wire to 700 and 740 series calibrators.

The Wohler 2-Layer Stainless Flatwire Chimney Brush delivers aggressive chimney cleaning reach for masonry and tile flues, pairing stainless flatwire bristles with an M10 threaded connection.

BROSA EBM 6111 load cell delivers 100 kN force measurement for felt tension control and industrial monitoring, with a flange-mount design and integrated cable for fixed installation.

Fluke I400 AC Current Clamp Adapter enables safe, non-intrusive AC current measurement up to 400A using a digital multimeter. Compact design with 1 mA/A output and banana plug connection.

The General Electric TEY120 is a 1-pole, 20-amp molded case circuit breaker designed for 277 VAC systems. It features a bolt-on mounting style, thermal magnetic protection, and LI trip functions. Rated at 14 kAIC at 277 V, it is commonly used in commercial and industrial lighting panel applications.

The HP A4978-62025 is an LCD and power switch subassembly mounted in a molded plastic bracket. The assembly integrates a monochrome LCD display and a front-panel power switch with a fixed ribbon cable terminating in a D-sub style connector. Identified by assembly label A4978-62025.

Pomona 5830-0 Flexible Maxigrabber Test Clip delivers secure electrical testing with a rotating pincer contact and standard banana jack termination. Designed for custom leads using 18–22 AWG wire.

Fluke 717 300G Pressure Calibrator provides -12 to 300 psi measurement with 0.05% accuracy, multiple pressure units, and rugged field-ready design.

Fluke MFTK-SM1310 – Complete MultiFiber Pro OLTS kit for Tier-1 singlemode MPO certification. Includes MF-100 power meter and 1310 nm light source for fast, accurate loss, polarity, and continuity testing.

AEMC fused test lead set with red/black color coding, 6.5ft length, 4mm banana plugs, and built-in 0.63A fuses for safe 1000V CAT IV measurements.

WOHLER 2494 Standard Clamping Cone secures 0.3-inch probes with stainless steel durability for stable, repeatable probe attachment in professional testing workflows.

Wöhler Snap & Sweep Regular Cleaning Rod 1222 is a single 3 ft rod with snap-in quick connectors for extending a Snap & Sweep chimney and exhaust cleaning assembly.

The Radiodetection RD8200 Cable & Pipe Locator Transmitter is designed for locating and tracing buried conductive cables and pipes. The system supports active signal application and passive detection modes, with on-screen signal strength indication and depth measurement in meters. This set includes a TX-10B transmitter and a 4" clamp.

The Inno Instrument HDMI to USB Cable is a communication interface designed for Inno Instrument VIEW series fusion splicers, including VIEW 3, VIEW 5, VIEW 7, and VIEW 12R models. It connects the splicer’s Micro HDMI port to a standard USB Type-A port on a computer for data transfer, software updates, and graphical interface mirroring.

Promax Tools PS-M-150-LUCU-B OM1 Pouch: High-quality 150m fiber optic cable with LC/UPC to SC/UPC connectors. Durable, reliable, and perfect for seamless connections.

Eaton PKZM0-6,3/NHI11 motor-protective circuit breaker delivers adjustable 4-6.3 A thermomagnetic motor protection, screw-terminal wiring, and compact panel-ready installation for motor control applications.

Application: Insulated Terminals

Allen Bradley 1734-MB provides reliable POINT I/O mounting w/ removable terminal block, DIN rail installation, and secure backplane connection for modular expansion.

The INNO Instrument DIN-18 is a DC power cable designed to connect compatible INNO TS-Pro or TS-Plus thermal strippers to the power output port of supported INNO View series fusion splicers. It enables field operation by allowing the thermal stripper to draw power directly from the splicer’s internal battery.

The Inno Instrument USB-6P is a Mini USB (male) to USB Type-A (female) adapter cable designed for use with INNO M Series fusion splicers. It enables connection of compatible USB accessories such as inspection probes or USB storage devices for data transfer and software updates.