Search results for: 'martin'

Leviton 061-4770-C locking plug delivers secure L7-15P connection at 15A and 277V for dependable electrical connectivity in compatible systems.

Westinghouse 1C31129G03 Ovation diagnostic analog output module for Ovation control system installations. Includes one plug-in module as shown.

Challenger C30-2 miscellaneous switch rated 30 amps, 2 poles, 240AC. UL listed unit with copper or aluminum wire compatibility and 60°C/75°C wire marking.

Fluke Networks FPC1S-LIQ-DUO provides 1 year of Premium Care Standard service coverage for the LinkIQ 200 Duo main unit. This service plan extends protection beyond the original warranty and includes repair labor, annual calibration or performance checks, and expedited service logistics.

Sumitomo Type-39 FCM (Micro Core / FastCat) is a core-alignment optical fiber fusion splicer for single-fiber joining work. Uses Direct Core Monitoring (HDCM) loss estimation and dual independent heat-shrink ovens to support splice-and-sleeve workflows in field or bench splicing environments.

The Emerson 73-610-115 is a DeltaV system power supply (DC/DC) module with 24 VDC system power input and labeled 12V, 5.1V, and 3.4V output rails.

The Yamatake Honeywell J-DOM10 is an industrial I/O module identified by the manufacturer marking “J-DOM10.” The unit features a 32-position screw terminal block and front-panel status indicators labeled RDY and ACT. Manufactured in Japan, this module is a legacy component commonly encountered in installed industrial control systems.

Fluke Networks FPC3S-LIQ-DUO provides three years of Premium Care Standard coverage for the LinkIQ 200 Duo main unit. The plan includes repair coverage beyond the original warranty, annual calibration or performance check, expedited shipping, and priority technical support.

Omron Automation Z-15GD55-MRA basic switch delivers compact snap-action control with short spring plunger actuation, attached lead wire, and visible 15A AC rating for automation switching needs.

Kanson Electronics 1010-1-J-2 off-delay timer relay delivers adjustable 0.5 to 50.0 second timing with 115V 50/60Hz operation and 10 amp output switching for industrial control circuits.

BROSA EBM 6111 load cell delivers 100 kN force measurement for felt tension control and industrial monitoring, with a flange-mount design and integrated cable for fixed installation.

The INNO Instrument Ribbon Holder are fiber ribbon holders designed for use with INNO Instrument View12R and View12R PRO fusion splicers. The holder supports 250 µm ribbon fiber during the splicing process, maintaining fiber alignment and stability within the splicer. Its detachable design allows quick installation and removal when preparing ribbon fibers for fusion splicing.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

The Thermo Scientific Niton XL3t Series is a handheld XRF analyzer platform offered as a configurable, quotable solution. Final instrument configuration is determined by selected model and analytical application. Capabilities, performance characteristics, and included features vary by configuration and are defined at the configured product level.

Allen-Bradley PHOTOSWITCH Series 9000 transmitted beam receiver sensor (42GRR-9003-QD, Series A) with 70–264V AC/DC operation, isolated N.O. solid-state (MOSFET) output, 4-pin AC Micro quick-disconnect, and IR 880 nm optics.

The Thermo Scientific Niton XL3t 600 delivers fast on-site soil screening with Soils & Minerals capability, helping environmental workflows assess contaminant levels without lab-first delays.

WOHLER CO Sensor 100,000ppm: Precision in High-Stakes Monitoring

Square D 83713 9070EO2D1 delivers open-type control circuit transformer operation with multi-tap primary input, 110/115/120 V secondary output, and 50/60 Hz ratings for industrial control panels.

Emerson DeltaV KJ3001X1-BD1 discrete input module for 120 VAC dry contact monitoring. This 8-channel module provides front-panel status indication and installs on DeltaV I/O hardware.

Fluke Networks MRC-50-LCLC-0.3M-M is a multimode 50µm LC-LC test reference cord with a durable metal latch, engineered for OTDR port protection and accurate fiber certification measurements.

The LEMO FGL.5K.314.CYMC20 is a 5K-Series circular push-pull connector with 14 low-voltage crimp contacts and IP68 environmental sealing. Designed for harsh environments, it supports up to 18 A per contact, reverse-gender configuration, and secure push-pull locking.

The Sonatest SLM1050 is a 5 MHz, 1" medium damped ultrasonic transducer for reliable NDT flaw detection and thickness measurement. Ideal for use on composites and metals. Compatible with Sitescan, Wave, and more. Shop now for proven performance.

The Fluke Networks NFA-MPO16P-SM-OUT is a single-mode MPO-16 pinned main or remote output adapter for the CertiFiber™ Max Optical Loss Test Set. This field-replaceable UniPort™ adapter enables direct connection to MPO-16 pinned fiber cables while protecting the tester port during certification workflows.

Siemens 3RT2035-3AK60 SIRIUS power contactor rated 41 A (AC-3) at 400 V with 18.5 kW operating power. Three-pole design with integrated 1 NO + 1 NC auxiliary contacts and 110 V AC (50 Hz) / 120 V AC (60 Hz) control coil. Size S2 frame with screw-type main terminals and spring-loaded auxiliary/control terminals.