Search results for: 'open'

Allen-Bradley SP-135893 is a precharge SCR firing circuit board kit for 1336 series 75 HP drives, supporting controlled DC bus charging and reliable drive startup in industrial motor control systems.

Fluke Networks DSX-PLA004-RKIT provides CAT 6A/Class EA plug replacement parts for DSX Permanent Link adapters, restoring accuracy without replacing the full adapter set.

The Fluke Networks FI2-7300 is a USB-C FiberInspector Ultra probe that delivers high-resolution end-face imaging and automated IEC pass/fail analysis when used with Versiv. It supports quick inspection of single-fiber connectors in enterprise and data-center fiber systems.

Fluke 805ES external vibration sensor enables precise measurements in tight or hard-to-reach areas with rugged, low-profile design and magnet mount.

Wohler 3837 stainless steel star brush supports chimney cleaning with flat wire construction suited for harder deposits in masonry and tile chimneys.

KATKO KU 380N load break switch delivers 3-pole isolation and switching up to 80A at 690V AC-22, supporting reliable control and disconnection of electrical loads in industrial power systems.

SOR 4N3-KK4-N1-C1A-ZZ pressure switch delivers adjustable 2-25 PSI switching for industrial pressure control, with 750 PSI over range and 1000 PSI proof pressure for monitored process applications.

Wenglor UF88VCF-P24 photoelectric switch sensor supports non-contact object detection for industrial automation with DC operation, fast switching performance, and flexible sensing capability for demanding machine and control tasks.

Emerson DeltaV KJ3001X1-BD1 discrete input module for 120 VAC dry contact monitoring. This 8-channel module provides front-panel status indication and installs on DeltaV I/O hardware.

Flexco NC-36-1 conveyor belt hinge pin delivers a flexible 1/4 in nylon covered steel cable connection, pre-cut for 36 in belt width splices in compatible Flexco hinged fastener systems.

Mersen A155F1D0R0-65E is a 15.5kV, 65E ferrule-mounted Amp-Trap CS-3 medium voltage fuse for transformer and distribution line protection. It is an E-rated, current-limiting, non-venting fuse with visual blown-fuse indication. 

Minebea NMB-MAT 4715KL-05T-B40 is a 24V DC axial cooling fan with 119 x 119 x 38.4 mm dimensions, 3200 RPM speed, and approximately 118 CFM airflow for industrial equipment cooling.

Siemens 3RP1505-1BQ30 SIRIUS timing relay with multi-function operation, 2 changeover contacts, 15 time setting ranges, LED indication, and screw-type terminals.

AutomationDirect D2-08NA-1 is an 8-point AC input module for DL205 PLC systems with 80-132 VAC input range, 47-63 Hz operation, removable terminal connection, and logic-side status indication.

The Siemens 771-8STF2 is a Series 771 current-to-pneumatic transducer that converts a 4–20 mA DC input signal to a 3–27 psig pneumatic output. This standard-capacity unit provides 0.16 scfm output and is configured with terminal strip connection and F2 non-incendive hazardous location approval.

The ABB S271 K1A is a 1-pole miniature circuit breaker from the System pro M S270 series, rated at 1 A with a K tripping characteristic. It provides thermal overload and magnetic short-circuit protection and supports 230/400 V AC operation with a 6 kA breaking capacity.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

The TCI AS-B875-002 KLC25BE dv/dT Guard Output Filter is designed to protect AC motors driven by PWM variable frequency drives. Rated for 25 A, 3-phase, 480 V systems, it limits voltage spikes and dV/dt effects that can damage motor insulation and cabling.

The Allen-Bradley 1769-IQ16 is a Compact I/O 16-point, 24V DC digital input module for CompactLogix and MicroLogix 1500 systems. It supports sinking and sourcing inputs, provides LED status indication per point, and installs via DIN rail or panel mount.

The Honeywell 621-9939 Serial Link Module is a communication interface for Honeywell Series 9000 and IPC 620 control systems. It manages serial I/O data exchange between the main processor and distributed serial devices using dual asynchronous channels and RS485 connectivity.

Schneider Modicon AS-W808-002 remote I/O signal and power cable enables communication and auxiliary power between Modicon 984 and 800 Series PLC processors and remote terminal bases in legacy automation systems.

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.

Allen-Bradley 1326AB-MOD-M6-C1 is an M6 encoder mounting adapter kit designed to install an 845H encoder onto 1326AB series motors, delivering secure mechanical feedback integration in industrial motion systems.

Allen-Bradley 1334-50907 Line/Converter Power Module for Bulletin 1334 AC drives. Internal power board supporting sine-weighted PWM motor control in 5–10 HP variable frequency drive systems.

Allen-Bradley 1771-ID isolated AC/DC input module for PLC-5 systems, providing six individually isolated 120V inputs for reliable signal detection from switches and discrete field devices.