Search results for: 'iec'

Fluke Networks MultiFiber Pro Laser Source: Fast, accurate 1550 nm fiber testing with built-in MPO polarity verification and easy reporting.

The BITE3 is a tool used to determine the health of lead-acid batteries up to 2000 Ah. Its measurements can provide the best basis for evaluating the overall health of batteries from terminal plate to terminal plate and, to a lesser extent, the charger. The BITE3 includes PowerDB LITE Management Software.

The Keyence SL-U2 is a switching-type power supply unit designed for industrial safety applications. It provides a regulated 24 VDC output at up to 1.8 A from a universal 100–240 VAC input and is intended for use with Keyence safety light curtain systems.

Amprobe LM-200LED LED Light Meter delivers accurate lux and foot-candle measurements using a remote cosine-corrected sensor. Designed for professional LED and visible light evaluation.

Fluke T90 voltage tester delivers reliable two-pole AC/DC voltage and continuity testing from 12–690V. Designed for fast troubleshooting with clear LED indicators and rugged construction.

The Allen-Bradley 442G-MABE1 Escape Release Module with Handle is a safety accessory for the Guardmaster 442G Multifunctional Access Box. It allows personnel to open a locked safety guard from inside a safeguarded area without tools, supporting emergency exit functionality.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

Pomona 6365 replacement DMM test lead set designed for sheathed banana jack multimeters. CAT III 1000V rated with silicone wire and molded probe bodies for reliable electrical testing.

Fluke Networks MFTK-DC SM test kit enables fast MPO single-mode fiber certification at 1310/1550 nm, inspecting, cleaning, and testing all 12 fibers in seconds.

Fluke Networks DSX-8000-MOD CableAnalyzer Module – Expansion or replacement module for the DSX-8000 system. Provides Cat 8/Class I & II copper certification up to 2000 MHz with Level 2G accuracy. For use with Versiv mainframes.

Elevate your fiber testing capabilities with the **Viavi E136FB-VFL-AFL SmartOTDR**. This compact, handheld tester supports tri-wavelength analysis at 1310nm, 1550nm, and filtered 1650nm, making it an essential tool for field technicians. Equipped with a Visual Fault Locator (VFL) and APC connector, this device ensures quick identification of faults and secure connections, streamlining FTTH and FTTx network diagnostics. Lightweight and user-friendly, it delivers accurate results with automated analysis. Perfect for telecommunications and data center applications, the Viavi E136FB is your go-to solution for efficient fiber optic testing.

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

Schneider Electric CAD50G7 is a TeSys Deca control relay with five normally open contacts and a 120 VAC 50/60 Hz control coil. Rated up to 690 VAC and 10 A, it supports DIN rail or panel mounting and is designed for industrial control circuit applications.

The Fluke CO-220 is a handheld carbon monoxide meter designed to detect and measure CO concentrations from 0 to 1000 ppm. It uses a stabilized electrochemical, gas-specific sensor and provides both numeric LCD readings and an audible beeper response. Features include MAX Hold, automatic backlight, sensor self-test, and automatic power-off.

Amprobe LM-120 light meter delivers accurate auto-ranging lux and footcandle measurements using a silicon photodiode sensor, with MIN/MAX capture and data hold for lighting diagnostics.

Fluke T130 voltage and continuity tester delivers reliable AC/DC testing from 6–690V with LCD display and switchable load, helping electricians verify live and dead circuits safely and clearly.

Fluke Networks MRC-50-LCLC-0.3M-M is a multimode 50µm LC-LC test reference cord with a durable metal latch, engineered for OTDR port protection and accurate fiber certification measurements.

Fluke AC288 SureGrip Terminal Block Probe Set delivers safe, precise connections to spring clamp and screw terminals using retractable stainless steel probe tips compatible with 4 mm test leads.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

Fluke 787B ProcessMeter combines a safety-rated digital multimeter with mA loop calibrator functions, enabling accurate measurement, sourcing, and simulation for industrial current loop troubleshooting.

Fluke Networks MRC-625-LCLC-M TRC provides 62.5 µm multimode testing with metal LC connectors, delivering durable, reference-grade performance for CertiFiber Pro.

The Fluke Networks FI2-7000-MPO is an MPO-optimized FiberInspector Ultra camera that provides automated analysis of MPO-12/MPO-24 end-faces, fast pass/fail results and high-resolution imaging for data-center and enterprise fiber-inspection workflows.