Search results for: 'paired'

The Emerson Fisher-Rosemount KJ4001X1-CA1 is an I/O terminal block used as an interface between field wiring and control system I/O modules. The unit provides 16 numbered terminal positions and is designed for industrial automation installations, including hazardous location environments as indicated on the device label.

The Fluke Networks FI2-7000-MPO is an MPO-optimized FiberInspector Ultra camera that provides automated analysis of MPO-12/MPO-24 end-faces, fast pass/fail results and high-resolution imaging for data-center and enterprise fiber-inspection workflows.

Fluke 700G31 Calibrator: Precise digital pressure measurement up to 10,000 psi with 0.05% accuracy, rugged IP67 design, and easy data logging.

The Fluke Networks FI2-7300 DC KIT-NW includes the FI-3000 FiberInspector Ultra camera (non-wireless), Versiv mainframe, MPO and single-fiber adapters, QuickClean tools, FiberLert detector, VFL and accessories, providing a complete fiber inspection and cleaning solution for data-center environments.

Fluke Networks LinkIQ Industrial Ethernet Test Kit: Validate cabling up to 10GBASE-T, diagnose switches, test PoE Class 1–8, and generate reports with ease.

Fluke MFMULTIMODESOURCE MultiFiber Pro Multimode Source – Light source module for MPO fiber testing. Provides 850 nm output for use with the MultiFiber Pro Optical Power Meter to measure loss, polarity, and continuity on multimode MPO trunks.

Wohler A400 Probe/Hose Assembly V2 supports flue gas sampling for A400 combustion analysis, pairing a rigid probe and hose configuration for dependable gas intake during service and diagnostic workflows.

Wöhler PTFE Cone for Thin Tubes is a compact probe accessory for narrow-tube measurement setups, pairing PTFE construction with a cone-style fit for precise work in confined access points.

The Wohler Residential Air Duct & Dryer Vent Cleaning Set pairs rotary duct and dryer vent cleaning tools with VE 400 HD inspection for cleaning, viewing, and documenting residential duct conditions.

Radiodetection RD8100 PDLG utility locator with Tx-5 transmitter. Supports current direction and fault finding for line validation, with integrated GPS and usage logging for documented locating operations.

Phoenix Contact RAD-IN-8D is an 8-channel digital input extension module for the Radioline system. It accepts 5–30 V AC/DC signals, mounts on a 35 mm DIN rail, and connects via a bus foot connector for modular industrial automation signal acquisition.

Allen-Bradley 1334-MOD-W3 run/fault contact mod kit adds isolated relay outputs for remote drive status monitoring on Bulletin 1334 and 1335 AC drives, supporting external control and annunciation systems.

Fluke Networks DSX2-8000-PRO CableAnalyzer Kit – Complete copper and fiber certification system. Certifies Cat 8/Class I & II copper with Level 2G accuracy plus Tier-1 multimode/singlemode fiber using Quad OLTS. Includes FiberInspector probe.

The Fluke IB875K kit pairs the rugged 87V True-RMS multimeter with insulated hand tools for safe, accurate industrial troubleshooting. It handles complex signals, VFD applications, and demanding environments while the included tools support high-voltage maintenance tasks.

Fluke Networks PRO3000F60-KIT: Filtered probe and tone generator for precise cable tracing, SmartTone™ tech, and interference blocking.

Adam Equipment PT Stainless Steel Platform 2500lb/1000kg: Ideal for large/oversized object weighing in warehouses. IP66 rated, durable, easy-to-clean stainless steel.

Black Box IC107A-R2 RS-232↔RS-422/485 converter for data-only serial communication. Supports 4-wire full-duplex operation for point-to-point or multipoint links. Provides a DB25 female RS-232 interface and a 4-pin terminal block for RS-422/485 with TX/RX/PWR LEDs.

Emerson Ovation 1C31189G31 Speed Detector Module for the Ovation DCS. This module monitors rotating equipment speed and converts sensor input into digital data for real-time control, monitoring, and diagnostics.

The Fluke II905/SB140/FPC3 is an industrial acoustic imaging leak detector kit that pairs the II905 Acoustic Imager with the SB140 Sound Beacon and 3 years of Premium Care. It visually locates and assesses compressed gas, vacuum, and other ultrasonic leaks using a 7″ LCD touchscreen and LeakQ™ analysis to help teams quickly find, size, and document leaks