Search results for: 'automation'

Allen-Bradley 1336-RLOAD-SP1A load resistor for Bulletin 1336 AC drives, designed to manage internal load, DC bus discharge, and power stabilization in 25–30 HP, 460V drive systems.

Honeywell R4138D 1016 flame safeguard control designed for industrial burners and boilers. Provides supervised ignition sequencing, flame monitoring, and safety shutdown on flame failure.

Emerson Phoenix Contact 1X00102H01 is an Ovation DCS power distribution module that delivers protected 5V, 12V, and 24V DC power to controller and I/O modules with diagnostic support.

Allen-Bradley 1336-BDB-SP4C Gate Drive PCB designed for 1336 series variable frequency drives, supporting 20 HP and 460 VAC operation for reliable drive control and power regulation.

Fluke TLK282 Test Lead Kit: Deluxe SureGrip leads with back probe pins and hook clips, ideal for automotive diagnostics up to 60 V DC.

Fluke handheld tachometer measures RPM and surface speed with contact and non-contact modes, ideal for industrial and manufacturing applications.

Fluke 771 clamp meter: Measure 4–20 mA signals without breaking the loop, 0.2% accuracy, detachable clamp, and dual backlit display for easy troubleshooting.

Balluff BFS 26K-PS-L01-S115 color sensor delivers reliable, high-precision color detection for automation, compatible with any PLC using 3×PNP inputs and M12 cabling.

Toshiba VT130H9U4055 H9 drive delivers precise 5HP 460V 3PH motor control with vector control, motor-over-flux braking, and NEMA 1 industrial reliability.

Modicon AS-BDEP-210 115 VAC 8-channel input module with 1.8 kV isolation for 800 Series I/O and 984 PLC racks. Provides reliable ON/OFF detection from 80–132 VAC with fast 10 ms response for stable discrete monitoring in legacy Modicon systems.

Opto 22 IAC5 AC input module provides rugged, optically isolated voltage and switch status sensing for G1 I/O racks in industrial control systems.

Eagle Eye LB-480-300-CCD DC Load Bank delivers constant current discharge testing with integrated data management software for monitoring, recording, and analyzing battery performance across DC systems.

ABB 1SVR427032R0000 switch mode power supply delivers 24 VDC output at 2.5 A from a 100–240 VAC input, with adjustable output voltage from 24–28 VDC and 60 W max load capacity for control and industrial power applications.

Bently Nevada 330101-00-80-05-02-00 3300 XL 8mm Probe built for vibration sensing in 3300 XL monitoring setups, with attached cable and connector shown in the provided images.

Eagle Eye DLV-Ultra battery testing kit with DLV-Pro voltmeter and SG-Ultra hydrometer for measuring voltage, specific gravity, temperature, and discharge performance.

The Emerson KJ2006X1-BK1 Virtual I/O Module (VIM) is designed for DeltaV Safety Instrumented Systems (SIS) with CHARM I/O technology. It simulates up to 96 individually addressable I/O channels for offline system development, logic validation, commissioning preparation, and operator training without physical field wiring.

The Mitsubishi CP30-BA 1-Pole 5A M-Curve Circuit Protector is a compact DIN-rail-mounted supplementary protector designed for low-capacity control circuits. It features a medium-speed hydraulic-magnetic tripping characteristic, 5 A current rating, and supports AC 250 V or DC 65 V operation in industrial control panels.

Schneider Electric CAD50G7 is a TeSys Deca control relay with five normally open contacts and a 120 VAC 50/60 Hz control coil. Rated up to 690 VAC and 10 A, it supports DIN rail or panel mounting and is designed for industrial control circuit applications.

The Omron MY4Z DC24(S) is a general-purpose miniature power relay with a 4PDT contact configuration and 24 VDC coil. Rated for 5 A switching in four-pole applications, it is designed for sequence control and power switching in industrial control systems.

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

The Honeywell 621-9938RC is a dual-port Serial I/O Module for the IPC 620/621 Programmable Controller System. It provides redundant serial communication, configurable I/O point allocation, DIP switch configuration, front status LEDs, and supports hot-swappable operation in redundant serial I/O architectures.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

This CCC Series 4 temperature input module set includes one IOM TCW (I-1/201-2/200) and one EIOM TCW (E-1/202-3/200). Both modules are designed for 3-wire GDC RTD temperature inputs and chassis mounting within CCC Series 4 control systems.

The ABB Bailey IMASI02 is an Analog Slave Input module for the Infi 90 Process Management System. It converts analog field signals into digital data for processing by a Multi-Function Processor and interfaces up to fifteen process signals through a single MMU slot.