Search results for: 'openzl'

The GE Fanuc IC693CHS392G is a 10-slot expansion I/O baseplate for the Series 90-30 PLC platform. It features a 25-pin D-type expansion connector, rack address DIP switch, and supports local I/O expansion up to 50 feet. Designed for use with compatible CPU baseplates.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

The TCI AS-B875-002 KLC25BE dv/dT Guard Output Filter is designed to protect AC motors driven by PWM variable frequency drives. Rated for 25 A, 3-phase, 480 V systems, it limits voltage spikes and dV/dt effects that can damage motor insulation and cabling.

The KAMAN Sensors digiVIT 855949-000 is a self-tuning digital driver for non-contact inductive and eddy current position and displacement sensors. It features pushbutton calibration, embedded intelligence, selectable analog outputs, and Ethernet connectivity for monitoring and parameter switching.

The MIP LM 3086 EPA3 is a laser-based opacity and dust monitor designed for continuous emissions monitoring in industrial stacks. It uses a single-pass, dual-path laser architecture with an optical reference path to measure opacity, optical density, and calibrated dust concentration values.

Schneider Modicon AS-W808-002 remote I/O signal and power cable enables communication and auxiliary power between Modicon 984 and 800 Series PLC processors and remote terminal bases in legacy automation systems.

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.

The Square D 8501NR61 is an 11-pin plug-in relay socket designed for use with compatible Square D relays and timers. It features single-tier screw clamp terminals and supports both panel and DIN rail mounting for industrial control applications.

Allen-Bradley 1326AB-MOD-M6-C1 is an M6 encoder mounting adapter kit designed to install an 845H encoder onto 1326AB series motors, delivering secure mechanical feedback integration in industrial motion systems.

Allen-Bradley 800T-FXJE6A5 emergency stop pushbutton with maintained push-pull action, jumbo red E-STOP mushroom head, and dual normally closed late-break contacts for industrial safety circuits.

Allen-Bradley 1336-T-SP5A control transformer designed for 1336 PLUS, PLUS II, Force, and Impact drives, supporting 150–250 HP systems at 460 VAC with stable internal control power delivery.

Allen-Bradley 1772-SD2 remote I/O scanner enables PLC-2 processors to communicate with remote I/O racks, supporting up to 1792 I/O points with serial twinaxial connectivity and LED status indicators.

Allen-Bradley 50388 Driver PCB Board provides signal conditioning and drive interface control for compatible Allen-Bradley automation systems, supporting reliable communication between logic modules and field devices.

Metso Automation PDP401 Distributed Processing Unit for the maxDNA DCS, delivering core data acquisition, control execution, and processing within rack-mounted Metso automation systems.

Allen-Bradley 800H-R3HA7 explosion-proof selector switch station with HAND-OFF-AUTO operation, built in a Type 7 & 9 aluminum enclosure for Class I, II, and III hazardous industrial locations.

Allen-Bradley 1336-CONV-SP4A converter power module designed for 1336 series adjustable frequency AC drives. Supports three-phase motor control applications within compatible 1336 drive platforms.

Fluke Networks DSX-PLA004-RKIT provides CAT 6A/Class EA plug replacement parts for DSX Permanent Link adapters, restoring accuracy without replacing the full adapter set.

The Fluke Networks FI2-7300 is a USB-C FiberInspector Ultra probe that delivers high-resolution end-face imaging and automated IEC pass/fail analysis when used with Versiv. It supports quick inspection of single-fiber connectors in enterprise and data-center fiber systems.

Fluke 805ES external vibration sensor enables precise measurements in tight or hard-to-reach areas with rugged, low-profile design and magnet mount.

A durable 2 MHz angle beam shear wave ultrasonic probe measuring 20×22 mm with a 45° beam angle, optimized for steel inspections. Features a high-quality LEMO 1 connector for secure, reliable connections during nondestructive testing.

Introducing the OWON TAO3122A 2-Channel 14-bit 120MHz Tablet Oscilloscope