Search results for: 'goods stock'

Schroff 20800-199 measuring adapter card enables configurable signal routing and interface mapping across Eurocard-based systems using integrated switch matrix architecture.

Eagle Eye BA-PULLER Cell Pullers Set aids in the removal and/or replacement of battery cells for battery service applications.

Eagle Eye BA-CLEANUP battery cleanup kit with standard protective gear and cleanup items for spills and other battery cleanup.

Eagle Eye SG-Ultra Max Battery Cover designed for the SG-Ultra Max Digital Hydrometer battery compartment.

The Dwyer 1638-2 is a large diaphragm pressure switch designed for low-pressure applications with an operating range of 1 to 3 inches water column (WC). This configuration supports pressure-actuated switching within defined low differential ranges.

The Georg Fischer Signet 3-8510 is an integral-mount paddlewheel flow sensor designed for use in liquid flow measurement applications. This sensor is part of the GF Signet flow measurement platform and is intended for installation within compatible piping systems to generate a flow-proportional signal.

Fluke FEV100/TY1 is a test adapter designed to test the function and safety of electric vehicle charging stations. It simulates charging states, verifies charging voltage using a digital multimeter, performs CP Control Pilot testing, PE pre-test for dangerous voltage, and supports GFCI troubleshooting. Complies with SAE J1772 standards.

Fluke Networks GLD3FTKPM Premium Care Gold is a 3-year maintenance service plan for the Fluke FTK Power Meter. Coverage includes accidental damage protection, parts replacement, repair service, loaner support, and freight. This plan provides parts and labor service characteristics for dependable maintenance support.

Woodhead 1152 is a closed-end, screw-release steel guard designed for use with Woodhead 130105 series hand lamps. Constructed from 8-gauge zinc-plated steel, it provides protective enclosure for A21 incandescent lamp assemblies in industrial environments. Replacement guard only.

The Telemotive E7160-101 Radio Remote Control Receiver Module is a board-level component used within compatible Telemotive industrial radio control receiver assemblies. It functions as a receiver module in fixed-station radio control systems for industrial equipment integration.

The Thomas & Betts Steel City BL113 is a 1-inch snap-in knockout blank made from zinc-plated steel for commercial electrical installations. Designed to close unused knockout openings in steel boxes, it provides a secure, tool-free fit for Rigid and IMC conduit applications.

The Allen-Bradley 815-BOV4 is a manual reset overload relay designed for motor control applications. It provides thermal overload protection using a eutectic alloy mechanism and supports up to 27 A at 600 V AC. Suitable for use with Allen-Bradley motor control systems.

The Fluke TL1550EXT is a 25 ft extended test lead set designed for use with compatible Fluke insulation resistance testers. The set includes three color-coded leads with low-leakage probes and matching alligator clips, supporting extended reach during insulation resistance testing.

Fluke Networks MMC-50-SCST multimode launch cable with 50 µm fiber and SC/ST connectors. Designed for fiber optic testing applications, this 140-meter launch cable supports network test setups requiring multimode fiber connections.

Fluke Networks GLD-LIQ provides 1 year of Gold Support for the LinkIQ mainframe, delivering reliable technical assistance and dependable coverage for network and cable testing operations.

The ABB NASM01 Analog Slave Module is designed for use in ABB Bailey Network 90 and INFI-90 distributed control systems. It functions as an analog input slave module, processing incoming analog signals from field devices for industrial process control and monitoring applications.

The Honeywell 30731808-001 Regulator Card is a power regulation module used in Honeywell industrial control systems. It converts a +24 VDC backplane input into regulated +5 VDC, +12 VDC, and −12 VDC outputs to support system modules within compatible control chassis.

Fluke Networks NFA-LC-SINGLE is an LC interchangeable fiber optic adapter designed for direct use with compatible Fluke Networks optical power meters, enabling accurate LC connector testing in fiber networks.

Fluke Networks VERSIV-ADP-WIFI Wi-Fi Adapter enables wireless connectivity for Versiv mainframe cable analyzers, supporting efficient data transfer and network integration in Fluke Networks testing environments.

The Honeywell 3PA2 is a zinc limit switch enclosure designed for use with basic switches. It provides a durable gray chassis-style housing with screw mounting for industrial applications requiring an enclosed switch case. Intended to protect switch terminals and internal mechanisms.

The Square D 9065-AT-1L is a thermal overload relay designed for motor protection applications. This unit features a manual reset mechanism and copper line/load terminals, as shown. Identified by manufacturer labeling, it is part of the Square D Class 9065 series.

The AMLOC 120-4416 is a high-temperature capacitance sensor assembly used within AMLOC Energy Management Systems for desiccant air dryers. It interprets capacitance signals associated with moisture loading in the desiccant bed to support energy-managed dryer operation.

Oracle 2040-283 is a CAT5e RJ45 crossover network cable supplied as a single cable assembly. The packaging label identifies this unit as “CABLE CAT 5E XOVR RJ45.” Intended for Ethernet connectivity applications requiring a crossover cable configuration. Country of origin: United States.

The Honeywell C-HPE00 is a rack-mounted control system module used in Honeywell industrial automation environments. The unit consists of a metal card cage assembly with integrated backplane slots and an attached interface board. This listing includes only the hardware shown.

The Yamatake Honeywell J-HAM10 is an industrial analog input module used in control and automation systems. The module operates on 24 V DC power with a current draw of 450 mA and is manufactured in Japan. Model and electrical ratings are confirmed directly from the unit labeling.