Search results for: 'provides'

Provides high quality termination Years of trouble free service Waterproof design 360° shield termination

Provides high quality termination Years of trouble free service Waterproof design 360° shield termination

Provides high quality termination Years of trouble free service Waterproof design 360° shield termination

High quality termination Tin plated copper Polypropylene insulation UL and RoHS View all Insulated Wire Ferrules

High quality termination Tin plated copper Polypropylene insulation UL and RoHS compliant View all Insulated Wire Ferrules

Allen-Bradley 100-C12ZA10 3-pole contactor brings IEC motor-control switching with a 220V DC coil, 1 NO auxiliary contact, and marked AC load ratings.

Eaton DILM12-10 XTCE012B10A XT IEC contactor provides 12A three-pole full-voltage non-reversing control with 110–120 Vac coil, 1 NO contact configuration, and screw terminals.

Kaye X2025 Sensor Input Module for Validator 2000 delivers 12-channel sensor connectivity for validation workflows, supporting thermocouple, voltage, and current inputs with onboard calibration memory and reference RTD accuracy support.

Cantex 51337141 PVC Junction Box provides 12 x 12 x 4 molded rigid PVC protection for wires and terminals, with a gasketed cover for electrical device and fixture support.

Omron CJ1W-PD025 PLC power supply unit brings 24 VDC input power to CJ-series control racks with 5.0 A at 5 VDC, 0.8 A at 24 VDC, and 25 W capacity for modular automation systems.

Leviton CR20-I commercial-grade duplex receptacle rated 20A, 125V in NEMA 5-20R configuration. Ivory narrow-body design with side-wire termination and self-grounding clip. Qty 5.

The INNO Instrument USB-7P is a proprietary USB Type-C to DC power and data cable designed for use with INNO View 12R and View 12R PRO ribbon fusion splicers. It provides a dedicated interface for DC power delivery and device communication specifically configured for INNO splicer architecture not intended for use with non-INNO devices.

The ABB S271-K0.5A Miniature Circuit Breaker is a single-pole, DIN-rail mounted protection device from the System pro M S 270 series. It features a K-curve tripping characteristic with a 0.5 A rated current and 230/400 V AC rated voltage. Designed for cable and appliance protection, it provides thermal and magnetic trip mechanisms with a rated short-circuit breaking capacity of 6 kA in accordance with EN 60 898.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.

The Carlo Gavazzi IA12ALF02POM1 is an M12 flush-mount inductive proximity sensor with a 2 mm rated operating distance. This long-body version features a nickel-plated brass housing, M12 plug connection, PNP normally open output, 10–40 VDC operating voltage, and IP67 environmental protection.

The PLS 5G is a self-leveling five-point green laser level designed for plumb, level, and square point layout. It delivers ≤1/8 in accuracy at 30 ft (≤3 mm at 10 m) and features a pendulum lock for transport and tilt mode operation. With IP54 protection and a Class 2 green beam (525 nm), the PLS 5G supports interior layout applications up to 100 ft working range.

The Saft LS33600 is a 3.6 V primary lithium-thionyl chloride (Li-SOCl₂) D-size battery designed for long-term, low-to-moderate current applications. It provides a nominal capacity of 17.0 Ah, stable voltage output, and a wide operating temperature range from −60°C to +85°C. This non-rechargeable cell is commonly used in utility metering, industrial electronics, and professional equipment.

SolaHD SCP100S24X-CM delivers regulated 24VDC power for harsh environments, combining IP67 protection, universal AC/DC input, and Class 2 output in a compact chassis-mount industrial power supply.

Allen-Bradley 193-EEDB E1 Plus electronic overload relay provides precise three-phase motor protection with adjustable 3.2–16A current range, selectable trip classes, and direct mounting to 100-C IEC contactors.

Allen-Bradley 193-EPM1 is an E1 Plus overload relay adapter that enables DIN rail or panel mounting of Bulletin 193-EA and 193-ES electronic overload relays for flexible control panel layouts.

Allen-Bradley 800T-N26G green pilot light replacement cap for 30mm Bulletin 800T and 800H pilot lights. Designed for field replacement or completing assemblies without color caps.

Allen-Bradley 1771-A2B PLC-5 8-slot I/O chassis provides a stable backplane platform for 1771 modules, supporting modular control system expansion with secure back-panel mounting.