Search results for: '200 2'

Digi-Pas DWL-200 Torpedo Digital Level delivers fast digital angle and slope measurement with 0.1° resolution, alternate zero, inverted display, self-calibration, and magnetic hands-free positioning.

Allen-Bradley 700-P200A1 is a NEMA heavy-duty industrial relay with a 110–120VAC coil and two normally open contacts, designed for reliable switching in machine tool and demanding control applications.

The GE DS200VPBLG1AFF is a VME P2 backplane board used in GE LS2100 and Load Commutated Inverter control systems. It provides centralized power and signal distribution across a 13-slot chassis, supporting DSPC, gate distribution, exciter, and I/O extender boards.

The INNO Instrument V20 Fiber Optic Inspection Microscope is a handheld USB inspection probe designed for evaluating optical connector end-faces during fiber installation and maintenance. The V20 microscope provides dual 200x and 360x magnification, integrated LED illumination, and a VGA imaging sensor for connector inspection and documentation.

Fluke 190-202-III-S portable ScopeMeter delivers 200 MHz bandwidth, 2 channels, 2.5 GS/s sampling, and FlukeView software for advanced industrial diagnostics.

Fluke Networks OFP2-200-SI1625 OTDR delivers HDR performance with SmartLoop, WiFi, and inspection probe for fast fiber testing across 1310, 1550, 1625 nm.

Viken Pb200i/e Certified Pre-Owned HUD/EPA handheld XRF Analyzer with Co-57 5 mCi source (Ref 5/2024). Dual calibration for lead paint and soil testing under HUD and EPA compliance standards. Includes full charger and field kit.

The Wöhler GS 300 Gas Sniffer detects combustible gas leaks with 0–1,200 ppm methane and propane sensitivity, 12-stage bar graph display, and audio, visual, and vibration alarms.

Allen-Bradley 1492-CB2 H 200 is a 2-pole DIN-rail supplementary circuit breaker designed for industrial control panels, providing reliable thermal-magnetic overcurrent protection with an H-curve trip characteristic.

SciAps Z-200 Handheld LIBS Analyzer with installed Alloy and Element Pro applications. Alloy mode supports material grade identification, while Element Pro enables expanded elemental analysis including light elements, with integrated results review and export tools.

AEMC 2129.72 Kelvin Lead Set provides 25 ft Kelvin leads with 200A Hippo clamps for use with AEMC Model 6292 low-resistance testing applications requiring secure current and potential connections.

Fluke Networks OFP2-200-SI OptiFiber Pro HDR OTDR delivers fast, automated singlemode fiber testing at 1310 and 1550 nm with SmartLoop and WiFi.

Easy-Laser Case 3 shim kit with Types A/B/C/D, 0.05–2.00 mm stainless steel shims, permanently marked and burr-free. Foam-organized case for precise machine alignment setups.

Compact and lightweight pocket-size device LCD display Non-contact ACV detector LED flashlight Data hold Low battery indication DCV 4200mV/2V/20V/200V±(0.5%+3d) 600V±(0.8%+5d) ACV 2V/20V/200V±(0.8%+3d) 600V±(1.0%+5d) DCA 200μA/2000μA /20mA/200mA±(1.8%+5d) ACA 200μA/2000μA /20mA/200mA±(2.0%+5d) Resistance 200Ω/2kΩ/20kΩ/200kΩ/2MΩ±(1.0%+3d) 20MΩ±(1.2%+15d) Non contact ACV detector Y Diode test Y Continuity with beep Y Certificate RoHS, CE EN61010-1 CATIII 600V Battery 2x1.5V AAA

Hilti PS 300 Ferroscan Concrete Scanner Kit helps locate rebar, measure cover, estimate bar diameter, and refine scan analysis with PSA 200 Monitor Tablet, PROFIS Detection, and Expert Mode control.

Model No. MT-1210 Digits 3-1/2 digits 1999 counts Accuracy 1.0% best accuracy DCV 200mV/2V/20V/200V ±(1.0%+2d)500V ±(1.2%+5d) ACV 200/500V ±(2.5%+10d) DCA 200μ/2mA/20mA/200mA ±(2.0%+5d) 10A ±(3.0%+5d) Resistance 200Ω/2K/20K/200KΩ ±(1.0%+5d) 2MΩ ±(1.5%+5d) Extra function

Fluke Networks OFP2-200-SI1490 HDR OTDR delivers fast singlemode fiber testing with SmartLoop™, WiFi connectivity, splitter detection, and inspection probe.

AEMC MN261 AC Current Probe: Selectable 20A/200A ranges, BNC output, 100mV/10mV per amp, wide frequency response, ideal for oscilloscopes.

Fluke CV200 IR Window: Safe, quick 2-inch thermal inspection access with AutoGround, IP67 protection, and durable ClirVu optic coating.

Wöhler L 200 Locator pinpoints compatible VIS camera heads in pipelines, chimneys, and concealed areas with a graphical display, acoustic guidance, and 8.9 / 9.2 kHz locating capability.

Fluke 190-204-III is a 4-channel portable ScopeMeter oscilloscope with 200 MHz bandwidth, isolated inputs, WiFi and USB connectivity, built for high-voltage industrial signal troubleshooting.

Amprobe 30XR-A Multimeter: Accurate voltage, current, and resistance testing with VolTect non-contact detection, data hold, and manual ranging.

AEMC C177A AC Current Probe: 5mA–200A range, 10,000:1 ratio, 6.5ft CA connector lead—designed for CA6116N & CA6117 installation testers.