Search results for: 'area'

The MTL IOP32D is a DIN-rail mounted surge protection device designed to protect digital and analogue I/O circuits. It provides surge protection for two independent loops (four wires) using a hybrid protection circuit rated up to 20 kA. The device is suitable for industrial control and instrumentation applications and is certified for use in hazardous areas.

Appleton VU100M hazardous location incandescent luminaire delivers enclosed and gasketed 60–150 W A-21 lighting for wet and corrosive industrial areas requiring Class I, Division 2 performance.

The Emerson KJ2005X1-BK1 SX Controller is designed for use within the DeltaV™ S-Series Digital Automation System. It supports hazardous area installations with ATEX, IECEx, FM, and Class I Div 2 approvals. The unit operates on +5 VDC local bus power and is specified for industrial environments from –40°C to +60°C.

The Emerson DeltaV KL4502X1-BA1 (12P4990) is a CHARM standard terminal block designed for use with the DeltaV S-series Electronic Marshalling system. It provides the physical interface for field wiring and supports installation of CHARM (Characterization Module) components within DeltaV control architectures.

Hydrajaws M2000 Material Bond Tester Kit brings precise 25kN pull-off testing to concrete, screeds, coatings, laminates, plastics, paints, and enamels in lab, workshop, and on-site workflows.

Emerson KJ3222X1-BK1 is a DeltaV S-Series analog input module with 8 channels for 4-20 mA HART signals. The module is identified on manufacturer documentation as AI 8 CH 4-20mA HART CARD.

Fluke TC01A 25Hz mobile thermal camera delivers 256×192 IR resolution, 14–1022 °F range, and real-time analysis for fast inspections using Android USB-C devices.

The INNO Instrument IN-SS-60mm fiber splice protection sleeves provide mechanical reinforcement for fusion-spliced optical fibers. Each 60 mm sleeve uses a clear heat-shrink polyolefin outer tube, internal adhesive liner, and stainless steel strength member to support fiber alignment after the splicing process.

This swiveling HD video endoscope probe has 8 LEDs, a focus distance of 20-100mm, and a field of view of 100 degrees. This probe is compatible with the VE 220, VE 320, and VE 400.

Certified pre-owned Sonatest PFC3725, 2.25 MHz 3/8" highly damped fingertip compression wave transducer—precision flaw detection and thickness measurement for confined or limited-access areas. Compatible with Sonatest Sitescan, Prisma, Veo+, and Masterscan flaw detectors.

Brady WML-0811-202 self-laminating B-292 vinyl labels deliver durable wire ID for legacy Brady printers, offering strong adhesion and reliable cable marking.

Handle pulls out to access second lens 3.5X (10D) / 20X (76D) magnification Large lens Ø 2.0 in. Small lens Ø 0.7 in. Lens material: Acrylic Battery: 1.5V AAA x 3 pcs (not included)

Buckleys WRP01 Wet Roof Pro’ is a roof leak detector for locating faults in wet flat roofing membranes using voltage gradient measurement across non-conductive surfaces over conductive substrates.

IFM IGT002 inductive sensor delivers reliable 5 mm metal detection in washdown, hygienic environments with stainless steel housing and wide AC/DC compatibility.

Certified pre-owned Sonatest T1-35W0D 1 MHz 35 mm twin compression membrane transducer with Microdot connector—ideal for high-penetration flaw and corrosion detection in castings, forgings, and composite parts.

Certified pre-owned Sonatest T1-24.4T0D 1 MHz 24.4 mm twin compression membrane transducer with top exit Microdot connector. Delivers wide-area coverage and deep penetration for flaw detection and corrosion mapping in tough industrial environments.

The Thermo Scientific Niton XL3t Series is a handheld XRF analyzer platform offered as a configurable, quotable solution. Final instrument configuration is determined by selected model and analytical application. Capabilities, performance characteristics, and included features vary by configuration and are defined at the configured product level.