Search results for: 'direct rated'

AEMC HX0030C PROBIX PRHX1 1/10 Probe: High-frequency 250MHz voltage probe rated 600V CAT III, designed exclusively for OX Series oscilloscopes.

Fisher XLT30-B acoustic leak detector with Multi-Sensor provides precise water leak detection using adjustable filters, notch rejection, and high-sensitivity microphones for concrete, asphalt, and turf surfaces.

The INNO Instrument JS-1618 AC Adapter is a 12.6V DC power supply engineered for the View 1, M7, M9, and A3 fusion splicers. It supports direct instrument operation and charging of compatible internal battery packs. The adapter accepts 100–240V AC input for global deployment and provides regulated 12.6V DC output at 1.8A.

Eaton DILEM-10 mini contactor delivers 8.80A switching, three-pole FVNR control, 1NO contact configuration, and 110–120 Vac coil operation in a compact IEC frame.

AEMC PEL 115 Power & Energy Logger provides field-ready power and energy logging for audits, diagnostics, and maintenance with rugged design and flexible data access.

Fluke 1587 MDT FC kit combines insulation testing, True-RMS multimeter functions, AC current measurement, and phase rotation checks for advanced motor diagnostics.

he HYTORC LST-3000 Lithium Series II is a 36V battery-powered electric torque tool rated up to 3,000 ft-lb. It features a brushless DC motor, TorcSense™ direct torque measurement, and a high-resolution rear display for controlled tightening and loosening of industrial fasteners using conventional reaction-arm configurations.

The Omron Automation F92A-C-1 is an M18 inductive coupler designed to transmit ON/OFF limit switch signals to compatible inductive proximity sensors without direct electrical contact. Using magnetic coupling between coils, it enables signal transmission across a 5 mm distance. The unit operates without a power supply and is prewired with a 2 m cable. Rated IEC IP67, it supports operation in environments exposed to oil and dust within specified temperature and humidity limits.

Allen-Bradley 193-EEDB E1 Plus electronic overload relay provides precise three-phase motor protection with adjustable 3.2–16A current range, selectable trip classes, and direct mounting to 100-C IEC contactors.

Omron Automation Z-15GD55-MRA basic switch delivers compact snap-action control with short spring plunger actuation, attached lead wire, and visible 15A AC rating for automation switching needs.

The Mitsubishi CP30-BA 1-Pole 7A M-Curve Circuit Protector is a compact hydraulic-magnetic circuit protector designed for supplementary protection of low-capacity industrial control circuits. It supports AC 250 V and DC 65 V operation and uses an M-curve trip characteristic suitable for moderate inrush loads.

The Mitsubishi CP30-BA 1-Pole 5A M-Curve Circuit Protector is a compact DIN-rail-mounted supplementary protector designed for low-capacity control circuits. It features a medium-speed hydraulic-magnetic tripping characteristic, 5 A current rating, and supports AC 250 V or DC 65 V operation in industrial control panels.

KATKO KU 380N load break switch delivers 3-pole isolation and switching up to 80A at 690V AC-22, supporting reliable control and disconnection of electrical loads in industrial power systems.

The INNO Instrument SPA3200 is a 3-channel digital power meter built for precise power consumption testing in R&D, automated assembly lines, and power test benches. It combines high measurement accuracy, a wide direct-input range, real-time waveform display, harmonic analysis, and internal data storage in a compact semi-rack design.

Eaton XTCEXFAC20 auxiliary contactor supports control-panel auxiliary switching with two normally open contacts and visible AC/DC ratings.

Pomona 5830-0 Flexible Maxigrabber Test Clip delivers secure electrical testing with a rotating pincer contact and standard banana jack termination. Designed for custom leads using 18–22 AWG wire.

Square D 2510KG1 manual switch delivers reliable 30A control for single-phase systems with a 2-pole toggle design and non-reversing operation in a compact NEMA 1 enclosure.

PDQ 6200R-01 wide stile rim exit device for 36" doors in US32D finish. Panic rated, reversible, and built for commercial duty applications.

ABB S201-K1 miniature circuit breaker set consisting of two single-pole 1 A MCBs from the System pro M compact S200 series. Each breaker features a K tripping characteristic and is designed for DIN-rail mounting in AC or DC electrical installations.

Light Efficient Design LED-8033E57 delivers 38W LED HID retrofit performance with 5700K daylight output, replacing 175W HID systems for post top and area lighting applications across 120–277V systems.

Topaz Lighting LU100/MOG-37 high pressure sodium lamp delivers 100W output with clear ED23.5 construction and mogul base, providing consistent 9,500 lumen illumination and extended 24,000-hour service life for commercial lighting applications.

The Fluke I17XX-FLEX6000/4PK includes four 36 inch iFlex flexible AC current clamps rated to 6000 A AC. Designed for use with Fluke 1736 and 1738 Energy or Power Loggers, these Rogowski-style probes connect directly to the instrument and display measurements without scaling factors.