Search results for: 'kits kit the'

Fluke Networks NFA-MMC24U-KIT UniPort Adapter Kit is designed for testing MMC 24 unpinned single-mode or multimode fiber cables with the CertiFiber™ Max Optical Loss Test Set. The kit includes pinned UniPort adapters and supporting components for fiber loss, length, and polarity measurement applications.

Fluke Networks NFA-MMC24P-KIT UniPort adapter kit includes two unpinned UniPort adapters for testing single-mode or multimode MMC24 pinned cables with the CertiFiber™ Max Optical Loss Test Set. Supports one-jumper reference methods and field-replaceable adapter protection.

Fluke Networks CFM-TRC-S-MPO16P is a CertiFiber™ Max single-mode test reference cord kit designed for testing MPO16 unpinned fiber cables. The kit includes main and remote reference cords and supports standards-preferred one-jumper reference methods when used with the CertiFiber Max Optical Loss Test Set.

Hydrajaws M2000 Material Bond Tester Kit brings precise 25kN pull-off testing to concrete, screeds, coatings, laminates, plastics, paints, and enamels in lab, workshop, and on-site workflows.

Fisher TW6-KIT is a pipe and cable locator kit for locating and tracing buried conductive utilities using inductive and conductive operating modes. The system operates at 81.92 kHz and includes a search handle, carrying case, and headphones.

The Fluke Networks LinkIQ FMC-10G Fiber Media Converter Kit enables fiber Ethernet port testing when used with a LinkIQ tester. The kit supports 1 Gb/s and 10 Gb/s fiber connections and includes media converters, SFPs, fiber patch cords, power bank, and carrying case for portable network troubleshooting.

The Fluke 289/IMSK Industrial Multimeter Service Kit combines the Fluke 289 logging multimeter with the i400 400A AC current clamp. The 289 features TrendCapture logging, low ohm capability, LoZ voltage, and a low pass filter for accurate measurements on variable frequency drives and noisy systems. The included i400 clamp enables current measurement up to 400 A AC without breaking circuits.

Eagle Eye Battery Spill Kit Series provides battery acid spill response support with selectable kit capacities for industrial battery maintenance areas.

The Fluke Networks LinkIQ LIQ-KIT-FMC Cable & Network Tester Kit verifies twisted pair and fiber performance up to 10GBASE-T and supports network troubleshooting. It provides frequency-based bandwidth validation, wiremap, distance to fault, IPv4/IPv6 ping, nearest switch diagnostics, and PoE testing, with RJ-45, USB, and SFP connectivity.

Fluke 700G30 calibrator delivers fast, precise pressure measurement with 0.05% accuracy, rugged IP67 design, and long 1500-hour battery life.

The Fluke 87V/E2 CAL Industrial Electrician Combo Kit centers on the Fluke 87V true-RMS digital multimeter and includes essential accessories for industrial electrical measurement. This configuration includes NIST traceable calibration with data and supports AC/DC voltage to 1000 V, AC/DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF, frequency to 200 kHz, and temperature to 1090°C. Rated to CAT III 1000 V and CAT IV 600 V.

The Fluke LIQ-KIT-87-5 Electrical & Network Troubleshooter Kit combines the LinkIQ Cable+Network Tester, IntelliTone Pro 200 probe, and Fluke 87V Industrial Multimeter in a single field-ready solution. It qualifies copper cabling up to 10GBASE-T using frequency-based measurements, performs switch and Ping diagnostics, and validates PoE negotiation and load delivery. The integrated multimeter supports electrical troubleshooting across industrial environments.

The PLS 180R RBP KIT Cross Line Red Laser Level Kit provides a self-leveling cross line laser with ≤1/8 in accuracy at 30 ft (≤3 mm @ 10 m). It features a 180° horizontal fan angle, 130° vertical fan angle, pendulum lock for transport protection, IP54 rating, and includes rechargeable and alkaline battery packs with mounting accessories.

Fluke 289/FVF True-RMS industrial logging digital multimeter combo kit with TrendCapture and FlukeView Forms software. Features 100 kHz AC bandwidth, 10,000-reading logging, LoZ voltage, low pass filter, low ohm capability, and peak recording.

The Allen-Bradley 2198-K57CK-D15M is a universal feedback connector kit for Kinetix 5700 drives. It provides wire terminations for encoder signals when using Allen-Bradley 2090-Series motor feedback cables and connects to the drive’s universal feedback (UFB) port.

The Amprobe AT-6010 Advanced Wire Tracer Kit is designed to trace energized and de-energized wires, identify breakers and fuses, and locate shorts or opens. The kit includes a receiver with large LCD display and transmitter supporting operation up to 600 V AC/DC in CAT III environments.

The Fluke 87V/PRV240 Digital Multimeter Kit combines the Fluke 87V Industrial Digital Multimeter with the PRV240 Proving Unit. The 87V supports AC/DC voltage and current measurement up to 1000 V and 10 A, resistance to 50 MΩ, capacitance, frequency to 200 kHz, and temperature from -200°C to 1090°C. The PRV240 provides a portable 240 V AC/DC source for verifying proper meter operation before testing.

The Sauermann Differential Pressure Hose Kit is an indispensable resource for professionals across diverse sectors, enabling them to ensure the efficiency and safety of their systems by delivering precise and trustworthy measurements of differential pressure.

PN 27556 Sauermann Water Trap is supplied with filter, hose and connection.

Allen-Bradley 1336-R2-SP2A precharge resistor kit for 1336 series drives, providing safe inrush current control and reliable compatibility across multiple drive families.

Square D 9998 SL-22 contact kit restores a single pole on Type S NEMA Size 0–1 contactors, delivering reliable OEM replacement performance for motor and lighting control.

Application: Multi-Contact (MC4)∅4mm Solar Contacts