Search results for: 'kitty the'

The Fluke Networks NFA-MPO12P-KIT is a UniPort adapter kit designed for MPO 12 pinned fiber testing with the CertiFiber™ Max Optical Loss Test Set. It supports single-mode and multimode testing and enables standards-preferred one-jumper reference measurements while protecting the test port.

The Fluke 179 True-RMS Digital Multimeter Electronics Kit supports electrical and electronic troubleshooting with voltage, current, resistance, frequency, capacitance, continuity, diode, and temperature measurements. The kit includes SureGrip accessories, a magnetic hanger, and a soft carry case for organized field use.

Fluke Networks FTK1200 is a SimpliFiber Pro multimode fiber verification kit with VisiFault. The kit includes an optical power meter, 850/1300 nm multimode source, FindFiber Remote ID source, magnetic straps, adapters, and a carrying case.

High quality termination Tin plated copper Polypropylene insulation UL and RoHS

The Fluke T5-600/62 MAX+/1AC II kit combines voltage, current, and continuity testing with infrared temperature measurement and non-contact voltage detection. The kit includes the T5-600 electrical tester, 62 MAX+ IR thermometer, and 1AC II VoltAlert tester for electrical troubleshooting and inspection tasks.

The Fluke FL62MAX+/323/1AC kit combines a rugged infrared thermometer, a True-RMS AC clamp meter, and a non-contact voltage detector. This three-instrument set supports electrical and mechanical troubleshooting with non-contact temperature measurement, current testing, and rapid voltage presence checks in a compact kit.

Fluke 417D/62MAX+ combines a laser distance meter and IR thermometer for HVAC layout, diagnostics, and electrical troubleshooting, delivering fast distance measurement and non-contact temperature readings.

Hydrajaws M2000 Material Bond Tester Kit brings precise 25kN pull-off testing to concrete, screeds, coatings, laminates, plastics, paints, and enamels in lab, workshop, and on-site workflows.

Fluke Networks NFA-MMC24U-KIT UniPort Adapter Kit is designed for testing MMC 24 unpinned single-mode or multimode fiber cables with the CertiFiber™ Max Optical Loss Test Set. The kit includes pinned UniPort adapters and supporting components for fiber loss, length, and polarity measurement applications.

Industrial multimeter service kit combining the Fluke 179 True-RMS digital multimeter and Fluke 323 True-RMS clamp meter. Designed for troubleshooting electrical and electronic systems, with voltage measurement up to 1000 V AC/DC and AC current measurement up to 400 A.

Fluke Networks NFA-MMC24P-KIT UniPort adapter kit includes two unpinned UniPort adapters for testing single-mode or multimode MMC24 pinned cables with the CertiFiber™ Max Optical Loss Test Set. Supports one-jumper reference methods and field-replaceable adapter protection.

The Fluke Networks NFA-MPO12U-KIT is a UniPort™ adapter kit designed for testing MPO12 unpinned fiber cables with the CertiFiber™ Max Optical Loss Test Set. It includes two field-replaceable UniPort adapters that support single-mode or multimode testing and enable standards-preferred one-jumper reference measurements.

Fluke Networks CFM-TRC-S-MPO16P is a CertiFiber™ Max single-mode test reference cord kit designed for testing MPO16 unpinned fiber cables. The kit includes main and remote reference cords and supports standards-preferred one-jumper reference methods when used with the CertiFiber Max Optical Loss Test Set.

The PLS PLS 5R KIT 5-Point Red Laser Kit is a self-leveling five-point red laser level designed for plumb, level, and square horizontal and vertical point layout. It features a durable pendulum lock platform with tilt mode functionality and delivers accuracy of ≤1/8 in at 30 ft (≤3 mm @ 10 m). The kit includes a floor stand, magnetic L-bracket, pendulum target, red reflective target, battery pack, and carrying pouch.

The Fluke i1010 AC/DC current clamp kit extends the current measurement range of compatible multimeters. It measures AC current from 1 A to 600 A and DC current from 1 A to 1000 A using a Hall-effect sensor. The kit includes a zippered carrying case for storage and transport.

The Fluke Networks CFM-TRC-S-MPO16U is a CertiFiber™ Max single-mode test reference cord (TRC) kit designed for testing MPO16 pinned fiber configurations. It is used with the CertiFiber Max Optical Loss Test Set (OLTS) to support standards-preferred one-jumper reference measurements.

Dual color long nose plier 136mm Dual color diagonal cutting Plier 125mm Professional Modular Crimps Strips & Cuts tool Punch down tool 110 blade Multi-modular cable tester Butt Set Pro-soft screwdriver 5x75mm Pro-soft screwdriver 6x100mm Pro-soft screwdriver #2x100mm Pro-soft screwdriver #2x40mm Soft side tool pouch

Fisher TW6-KIT is a pipe and cable locator kit for locating and tracing buried conductive utilities using inductive and conductive operating modes. The system operates at 81.92 kHz and includes a search handle, carrying case, and headphones.

The Fluke Networks LinkIQ LIQ-KIT-FMC Cable & Network Tester Kit verifies twisted pair and fiber performance up to 10GBASE-T and supports network troubleshooting. It provides frequency-based bandwidth validation, wiremap, distance to fault, IPv4/IPv6 ping, nearest switch diagnostics, and PoE testing, with RJ-45, USB, and SFP connectivity.

The Fluke Networks LinkIQ FMC-10G Fiber Media Converter Kit enables fiber Ethernet port testing when used with a LinkIQ tester. The kit supports 1 Gb/s and 10 Gb/s fiber connections and includes media converters, SFPs, fiber patch cords, power bank, and carrying case for portable network troubleshooting.

The Fluke 289/IMSK Industrial Multimeter Service Kit combines the Fluke 289 logging multimeter with the i400 400A AC current clamp. The 289 features TrendCapture logging, low ohm capability, LoZ voltage, and a low pass filter for accurate measurements on variable frequency drives and noisy systems. The included i400 clamp enables current measurement up to 400 A AC without breaking circuits.

5/64", 3/32", 7/64", 1/8"9/64", 5/32", 3/16", 1/4" T8H, T10H, T15H, T20H, T25H, T27, HT30H, T35H, T40H #4, #6, #8, #10 #6, #8, #10 #1, #2, #3, #4 #1, #2, #3

A reputable electrician is only as good as his/her tools. The Eclipse Tools 14-Piece Toolkit with Pouch includes Heavy Duty, high-quality tools and is perfect for the professional or apprentice electrician. Included in this kit is an assortment of essential tools ranging from electrical tape, lineman's pliers, crimpers, tape measure, receptacle tester and more. All tools in this kit will fit in the supplied tool pouch with a belt for easy transportation. Since 1997, Eclipse Tools has produced top-quality, professional-grade electrical tools that deliver performance, durability and affordability. Our emphasis is on making great products that stand up to the demands of professionals as well as DIYers. Eclipse Tools produces great tools and accessories you can depend on for years to come.

The Fluke LIQ-KIT-87-5 Electrical & Network Troubleshooter Kit combines the LinkIQ Cable+Network Tester, IntelliTone Pro 200 probe, and Fluke 87V Industrial Multimeter in a single field-ready solution. It qualifies copper cabling up to 10GBASE-T using frequency-based measurements, performs switch and Ping diagnostics, and validates PoE negotiation and load delivery. The integrated multimeter supports electrical troubleshooting across industrial environments.