Search results for: 'matched'

AEMC 2135.43 Inverter: Power your ground testers and meters on the go with this 12VDC to 120VAC inverter, ideal for vehicle use and field testing.

Wohler VIS 400 Camera Head Plastic Domes, P/N 7075, provide replacement dome covers for the 2-inch pan-and-tilt camera head in a convenient pack of 5.

The Eagle Eye GFL-1000-CC is a dual current clamps set for the GFL-1000 Ground Fault Detector & Locator, designed for comparative tracing on parallel conductors and feeders without disconnecting circuits.

Fluke Networks CFM-TRC-S-MPO12U provides a reference-grade single-mode MPO12 test reference cord set for CertiFiber Max OLTS, enabling standards-preferred one-jumper testing with reduced measurement uncertainty.

Fluke BP1730 rechargeable lithium-ion battery pack designed exclusively for the Fluke 1730 Energy Logger, delivering reliable portable power with OEM-approved charging and safety compliance.

Wohler 3838 Flexible Joint for 4.5 mm Rod adds flexible articulation to compatible rod systems for smoother navigation through tight inspection pathways and angled access points.

Wöhler 5529 Perlon Threaded Brush Kit brings four M10 brush sizes—8", 10", 12", and 14"—into one flexible cleaning set for matching different flue, chimney, and ventilation line diameters with fast, practical setup.

Allen-Bradley 193-BSB30 thermal overload relay delivers adjustable 2.0–3.0 A motor protection with Class 10 operation, manual or auto reset selection, and direct-mount Bulletin 193 form factor control.

The INNO Instrument E-70 fusion splicer electrodes are official replacement components designed for compatibility with INNO View Pro, Ribbon, and X Series splice machines. Rated for up to 5,500 splices per set, they support stable arc discharge performance and scheduled maintenance intervals.

Fluke Networks CFM-TRC-S-MPO12P CertiFiber Max test reference cord set supports accurate optical loss testing of single-mode MPO12 unpinned fiber when used with CertiFiber Max OLTS.

The Eaton H2006B-3 is a Freedom NEMA heater coil set designed for thermal overload protection in motor control applications. This Class 20 standard trip heater pack supports selectable full load current settings from 1.79A to 2.9A via dial positions A–D and is supplied as a factory-calibrated set of three elements.

Fluke Networks TRC-SM-VERIFY-MPO12U is a reference-grade single-mode MPO12 Type A verification cord designed to confirm proper reference settings when testing unpinned MPO cables with CertiFiber Max systems.

Pomona 5523 Minigrabber Patch Cord Kit includes ten 24-inch 20 AWG test leads with gold-plated minigrabber clips, providing secure temporary jumper connections for terminals and wire-wrap posts.

Allen-Bradley 1336-RLOAD-SP2A load resistor module engineered for 1336 PLUS, PLUS II, FORCE, and IMPACT drives, providing controlled regenerative and braking energy dissipation in supported voltage ranges.

Wöhler VIS 2xx / 3xx Battery delivers 12 V NiMH power, 2600 mAh capacity, and up to 120 minutes of operation for compatible VIS inspection camera systems.

AEMC 2118.84 Spring-Loaded Kelvin Probe Set delivers accurate low-resistance measurements using 4-wire Kelvin methodology. Featuring pistol-grip probes, 25A current rating, and 10.33 ft leads for use with compatible micro-ohmmeters.

The Wöhler Star, HT is a high-temperature cleaning star designed for professional chimney, vent, and duct cleaning. Made with robust plastic fibers and a 1.1 in. center hole, it is built for applications that require a durable star brush with heat resistance up to 482°F.

Fisher TW82P-HC 82.175 kHz underground line tracer with passive power detection for locating buried pipes and cables. Digital depth, azimuth, and signal current display in weatherproof IP65 housing.

Wöhler Snap & Sweep Regular Chimney Liner Kit delivers fast, modular chimney liner cleaning with snap-connect rods, rotary sweeping capability, and adaptable cleaning media for brick, stainless steel, plastic, and clay flue systems.

The Marlin 1200-J delivers a high-temp Type J male connector for reliable thermocouple connections, using glass-filled thermoset construction for extreme heat performance.

ProTEX 401033C Reaction Arm delivers stable, safe torque control for ProTEX torque multipliers, providing reliable reaction support for high-torque applications.

Olympus SA32-0L standard PAUT wedge for 0° longitudinal wave normal scan, designed for A32 footprint 32-element probes and general weld or component inspection requiring a straight-beam configuration.

Fluke Networks FI-3000TP MMC ADP adapter tip enables MMC patch cord inspection with the FI-3000 FiberInspector, featuring a lead-free design and RoHS-compliant build.