Search results for: 'mechanical goods'

Fluke 289/FVF True-RMS industrial logging digital multimeter combo kit with TrendCapture and FlukeView Forms software. Features 100 kHz AC bandwidth, 10,000-reading logging, LoZ voltage, low pass filter, low ohm capability, and peak recording.

The Fluke 289/IMSK Industrial Multimeter Service Kit combines the Fluke 289 logging multimeter with the i400 400A AC current clamp. The 289 features TrendCapture logging, low ohm capability, LoZ voltage, and a low pass filter for accurate measurements on variable frequency drives and noisy systems. The included i400 clamp enables current measurement up to 400 A AC without breaking circuits.

The INNO Instrument UN1COMP is a modular fiber splicing workstation kit designed for mobile and elevated field operations. The system includes the UN1CO Mobile tray, tripod stand, ladder and pole mounting brackets, and the UN1CO backpack.  The included mounting options allow use as a wearable workstation and tripod-mounted table.

The Ferraz Shawmut USCC3 (M217522) is a 3-pole Class CC fuse holder rated 30A and 600 VAC/VDC. Designed for 35mm DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial circuit protection applications.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

The Phoenix Contact PSR-SCF-24UC/URM/2x21 is a safety coupling relay designed for safe switch-off applications in industrial control systems. It features two force-guided changeover contacts, 24 V AC/DC supply voltage, and supports safety category 1, PL c, and SIL 1 applications.

The Kepco RA60 is a 19-inch rack-mount mainframe designed to house up to three Kepco HSP Series DC power supply modules. This configuration includes HSP 24-60MR and HSP 24-60R modules, supporting parallel operation, hot-swap capability, and high-current 24 VDC power distribution.

The Allen-Bradley 1769-IQ16 is a Compact I/O 16-point, 24V DC digital input module for CompactLogix and MicroLogix 1500 systems. It supports sinking and sourcing inputs, provides LED status indication per point, and installs via DIN rail or panel mount.

The Honeywell 621-9939 Serial Link Module is a communication interface for Honeywell Series 9000 and IPC 620 control systems. It manages serial I/O data exchange between the main processor and distributed serial devices using dual asynchronous channels and RS485 connectivity.

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.

Amprobe AMP-320 clamp meter measures 600 A AC/DC with True RMS, temperature, motor rotation, inrush current, and HVAC-ready diagnostics.

Allen-Bradley 193-EPD is an E1 Plus separate mounting adapter that enables DIN rail or panel installation of compatible electronic overload relays, improving control panel layout flexibility and thermal performance.

Olympus SA10-0L-IHC A10 phased array wedge with 0L longitudinal geometry, IHC housing, irrigation ports and carbide wear protection for A10-format phased array probes.

Fluke 566: Rugged infrared and contact thermometer with 30:1 D:S ratio, -40°C to 650°C range, adjustable emissivity, and dual backlit display.

AEMC 6611 Phase & Motor Rotation Meter: Identify phase order, motor direction, and live/open phases on 3-phase systems. Ideal 6609 replacement.

Wöhler 5529 Perlon Threaded Brush Kit brings four M10 brush sizes—8", 10", 12", and 14"—into one flexible cleaning set for matching different flue, chimney, and ventilation line diameters with fast, practical setup.

Wohler 3709 Stainless Steel Brush Kit brings 15 professional star brushes in 8, 10, and 12 inch sizes for chimney, boiler, and ventilation cleaning with durable stainless steel performance.

The Wohler 3332/3337 GRP Rod Stainless End Piece keeps rod systems ready for dependable service with a durable Ø0.43 stainless steel replacement built for repair and maintenance.

Wohler Viper XXL Cleaning Rod System delivers high-stability sweeping for large chimneys, pipes, and ventilation ducts with a 0.4" GRP rod, abrasion-resistant PA jacket, and metric marking.

The Adam Equipment MDW 300L digital scale offers precision for healthcare and fitness. It calculates weight, height, and BMI with easy mobility and durable construction. Ideal for medical facilities, gyms, and fitness centers.

The GE XL Vu D4030 is a 4mm industrial video borescope designed for remote visual inspection and stereo measurement of internal components and confined structures. This configuration supports forward and side viewing with interchangeable optical tips and articulating probe control.

Rugged, battery-powered Kaelus iPA-1900A PIM analyzer delivers precise passive intermodulation testing for wireless professionals. Portable, dual-band design with remote capabilities for efficient RF system diagnostics.

AEMC 2118.78 Kelvin probes bring crisp 10A low-resistance test contact with spring-loaded rotating tips, 4-wire measurement support, and 20 ft leads.