Search results for: 'contact'

Leviton 5461 is a brown industrial-grade single straight blade receptacle rated 20A at 250V. It features a NEMA 6-20R configuration, self-grounding design, impact-resistant nylon body, and back or side wiring for #14–#10 AWG copper conductors.

The Allen-Bradley 800FM-MT44 is a metal emergency stop push button operator with a 40 mm red mushroom actuator and twist-to-release operation. Designed for 22.5 mm panel mounting, this non-illuminated operator is part of the Bulletin 800FM metal series for industrial control applications.

Fluke T5-KIT accessory starter kit expands Fluke T5 electrical tester capability with SureGrip test probes, large jaw alligator clips, and a zippered soft carry case for organized field use.

Fluke TL28A automotive test leads provide reliable electrical access using wide-jaw alligator clips and a piercing probe. Silicone-insulated red and black leads support accurate automotive diagnostics.

MSA Ultima X hydrogen sulfide gas sensor cartridge labeled for 0–50 ppm detection. Model A-ULTX-SENS-16-1-0 with software version 1.10, shown in stainless steel threaded housing with red protective cap. Designed as a replaceable sensor module for Ultima X systems.

The Crouzet PJR 110A P4700 is a plug-in alternator control relay operating on a 110 VAC supply. The module provides SPDT relay output rated at 10 A and is housed in a compact rectangular enclosure with front position indicators. Used in control and protection circuits where monitored voltage conditions determine relay actuation.

Fluke Networks P4480009 Replacement Cord features angled bed-of-nails and piercing pin clips for reliable field testing with TS52 and TS40 series test sets.

Fluke Networks P3218024 line cord enables reliable testing of insulated telephone wires using straight bed-of-nails clips with compatible lineman test sets.

Fluke Networks FI1000-MPO-RT replacement tip for FI-1000 FiberInspector provides precise MPO/MTP fiber inspection without a translator knob for seamless testing.

Fluke AC120 Alligator Clips: Safety-insulated probe tip clips compatible with STL120 and TL75 test leads for secure electrical testing.

Fluke 9040 Phase Rotation Indicator: Accurate 3-phase testing with LCD display, high-voltage capability, and safe industrial probe connections.

Fluke MP1-3R/1B Magnetic Voltage Probes: Reliable, hands-free testing with strong magnetic grip. Precision-engineered for accurate voltage measurements!

The Wohler threaded stainless steel flatwire brush delivers rugged cleaning reach for chimney, flue, and duct maintenance with a 3-layer medium brush design.

AEMC 2129.89 Kelvin Lead Set provides 20 ft color-coded Kelvin connections with 3 in C-clamps for low-resistance testing applications using compatible AEMC 6290 and 6292 micro-ohmmeters.

The AEMC 2129.87 Kelvin Lead Set provides 50 ft color-coded Kelvin connections with 3 in C-clamps for low-resistance measurement applications using compatible AEMC 6290 and 6292 micro-ohmmeters.

AEMC 1017.84 Kelvin Clips provide a 10 ft, 10A Hippo-style Kelvin connection set for supported AEMC micro-ohmmeters using fork terminal termination.

Burndy YA25 502215 HYLUG compression lug supports 1/0 AWG copper conductors with a one-hole long-barrel design and 5/16 in stud size for secure electrical terminations.

HYDAC HDA 3405-C-400-130 pressure transmitter with 0 to 400 bar relative pressure range, G 1/4 A process connection, and 4-pole Binder series 714 M18 electrical connection.

The INNO Instrument LBT-50 Battery Pack is a rechargeable 11.1V, 4200mAh Li battery designed for ARC fusion splicer platforms. It provides portable power support for field fiber optic splicing applications and integrates directly with compatible INNO Instrument splicer systems requiring the LBT-50 form factor.

Fluke T6-1000PRO electrical tester uses FieldSense technology to measure true RMS AC voltage and current up to 1000V and 200A through an open fork for faster, safer troubleshooting.

Fluke TL1550B test lead set provides secure probe-to-clip connections for insulation testing. Designed for Fluke 1550B MegaohmMeter use with red, black, and green leads for reliable measurements.

Fluke I400 AC Current Clamp Adapter enables safe, non-intrusive AC current measurement up to 400A using a digital multimeter. Compact design with 1 mA/A output and banana plug connection.