Search results for: 'ins'

Fluke Networks CFM-TRC-S-MPO24P CertiFiber™ Max Test Reference Cord Set is designed for testing single-mode MPO 24 unpinned cables. The set includes one main and one remote reference cord and supports standards-preferred one-jumper reference methods when used with the CertiFiber™ Max Optical Loss Test Set.

The AEG SH 05.31 is a 4-pole auxiliary contactor from the SH 05 series with a 24V DC coil. It features a 3NO + 1NC contact configuration (31E) and screw terminals. Rated per AC-15 and DC-13 utilization categories as specified in the AEG 2014 extract catalogue.

Fluke Networks CFM-TRC-S-MPO16P is a CertiFiber™ Max single-mode test reference cord kit designed for testing MPO16 unpinned fiber cables. The kit includes main and remote reference cords and supports standards-preferred one-jumper reference methods when used with the CertiFiber Max Optical Loss Test Set.

The INNO Instrument CH-01 Universal Fiber Holder is a cleaver accessory designed to secure multiple fiber cable types during the cleaving process. It supports 250µm and 900µm fiber, flat or drop cable enabling technicians to work across common installation formats without changing holders. Compatible with select INNO high-precision cleavers.

The Fluke i1010 AC/DC current clamp kit extends the current measurement range of compatible multimeters. It measures AC current from 1 A to 600 A and DC current from 1 A to 1000 A using a Hall-effect sensor. The kit includes a zippered carrying case for storage and transport.

The Fluke Networks LinkIQ FMC-10G Fiber Media Converter Kit enables fiber Ethernet port testing when used with a LinkIQ tester. The kit supports 1 Gb/s and 10 Gb/s fiber connections and includes media converters, SFPs, fiber patch cords, power bank, and carrying case for portable network troubleshooting.

Fluke Networks TRC-SM-VERIFY-MPO24P is a reference-grade single-mode MPO24 verification cord for CertiFiber Max optical loss testing, ensuring accurate reference validation with pinned MPO24 fiber links.

Banner Engineering IAT210S glass fiber optic sensor cable with diffuse-reflective sensing. Features a right-angle brass sensing end, stainless steel monocoil sheathing, 3.2 mm glass fiber core, and 4.572 m length. Designed for use with a separate fiber optic amplifier.

Fluke Networks TRC-SM-VERIFY-MPO16P is a reference-grade single-mode MPO16 verification cord for CertiFiber Max, designed to confirm accurate reference settings when testing pinned MPO16 fiber links.

Fluke Networks MRC-50-LCLC-0.3M-M is a multimode 50µm LC-LC test reference cord with a durable metal latch, engineered for OTDR port protection and accurate fiber certification measurements.

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.

This CCC Series 4 temperature input module set includes one IOM TCW (I-1/201-2/200) and one EIOM TCW (E-1/202-3/200). Both modules are designed for 3-wire GDC RTD temperature inputs and chassis mounting within CCC Series 4 control systems.

The ABB Bailey IMFCS01 is an intelligent Frequency Counter Slave Module for INFI 90 and Net 90 DCS platforms. It processes high-speed pulse inputs from field sensors and communicates frequency and period data to a Multi-Function Processor via the slave expander bus for speed monitoring and control.

The LEMO FGL.5K.314.CYMC20 is a 5K-Series circular push-pull connector with 14 low-voltage crimp contacts and IP68 environmental sealing. Designed for harsh environments, it supports up to 18 A per contact, reverse-gender configuration, and secure push-pull locking.

The Yamatake Honeywell J-HMM00 is a high-level analog input module designed for Distributed Control System (DCS) architectures. Operating on 24 VDC with 60 mA current consumption, it supports multi-point analog signal acquisition for integration within compatible control systems such as MSC10.

Fluke 1777 Power Quality Analyzer delivers automatic three-phase power and harmonic analysis with high-speed transient capture and included 1-year Premium Care.

Fluke 3540 FC KIT enables three-phase power monitoring with wireless cloud streaming, harmonic analysis, and real-time condition monitoring.

Fluke Networks GLD3-OFP-MOD-Q Gold Support provides 3-year maintenance coverage for OFP-QUAD modules, including calibration, repairs, parts replacement, software updates, and 24/7 technical support for reduced downtime.

Fluke ii905 with SB140 sound beacon detects compressed gas leaks and verifies vessel integrity using acoustic imaging, with 1 year of Premium Care included.

Fluke FLK-A3000FC KIT Wireless Current Clamp Kit measures up to 400A AC with logging, inrush capture, and Fluke Connect wireless monitoring.

Allen-Bradley 1336-RLOAD-SP5A load resistor designed for 1336 adjustable frequency drives. Supports 575V operation in Frame E systems rated 150–300 HP for controlled load management.

Emerson Fisher 38B6041X152 I/P Assembly Shroud Kit for FIELDVUE DVC6000 digital valve controllers, converting 4–20 mA control signals into proportional pneumatic output for accurate valve positioning.

Fluke ii905 Acoustic Imager detects and quantifies gas and vacuum leaks up to 70 m with LeakQ leak rate and cost estimation plus Wi-Fi sharing.

Allen-Bradley 1492-CB1-H100 is a 10A single-pole thermal-magnetic supplementary circuit breaker for control circuits, featuring H-trip protection for highly inductive loads and DIN rail mounting.