Search results for: 'đau tai'

Wöhler Wadding Filter 150 pcs. supports clean sample conditioning for A 450 and A 550 combustion analysis workflows, helping maintain reliable flue gas measurement performance with convenient replacement stock.

WOHLER 2494 Standard Clamping Cone secures 0.3-inch probes with stainless steel durability for stable, repeatable probe attachment in professional testing workflows.

Wöhler Snap & Sweep Regular Cleaning Rod 1222 is a single 3 ft rod with snap-in quick connectors for extending a Snap & Sweep chimney and exhaust cleaning assembly.

Balluff BFS 26K-PS-L01-S115 color sensor delivers reliable, high-precision color detection for automation, compatible with any PLC using 3×PNP inputs and M12 cabling.

Square D FAL34050 delivers 50A, 3-pole thermal-magnetic circuit protection for 480V electrical systems with unit-mount installation and line/load lug connections.

Flexco NC-36-1 conveyor belt hinge pin delivers a flexible 1/4 in nylon covered steel cable connection, pre-cut for 36 in belt width splices in compatible Flexco hinged fastener systems.

Mersen A155F1D0R0-65E is a 15.5kV, 65E ferrule-mounted Amp-Trap CS-3 medium voltage fuse for transformer and distribution line protection. It is an E-rated, current-limiting, non-venting fuse with visual blown-fuse indication. 

RaySafe Xi light meter with B Light Probe for luminance and illuminance measurement in medical diagnostic X-ray imaging environments, including display and ambient light assessment.

Fisher XLT30-D acoustic leak detector with Multi-Sensor delivers precision underground water leak detection on hard and soft surfaces using advanced filtering and LCD audio visualization.

Fisher XLT-30-A acoustical leak detector with Big Foot ground microphone and Hydrophonic Cylinder Probe for underground water leak detection on hard surfaces and direct pipe contact applications.

The Schneider Electric Modicon Quantum 140XCP51000 is a dummy module with integrated terminal strip door designed for unused discrete I/O slots in Quantum PLC racks. It maintains rack mechanical integrity, preserves airflow for cooling, and protects internal backplane components from dust and contact.

The INNO Instrument LBT-8 is an 880mAh lithium-ion replacement battery designed for INNO TS Plus (TSP-0002 / TS-8+) and TS Pro thermal fiber strippers. It supports approximately 500 stripping cycles of standard 12-fiber ribbon cable in SAVE mode when fully charged. This listing includes the battery only.

The Fluke Networks DSX-CHA021S is a set of two M12D 4-position channel adapters designed for use with DSX Series CableAnalyzer systems. These adapters enable channel testing and certification of installed M12-D links supporting TIA Cat 5e and ISO Class D requirements, including verification of 100BASE-TX transmission performance.

The INNO Instrument DC300A Flat Cable Stripper is an aluminum stripping tool designed for 3 × 2 mm flat drop cable, 900 µm coating fiber, and 250 µm coating fiber. It features three side blades and an integrated locating ruler for consistent cleaver length positioning. 

Fluke Networks CFM-TRC-S-MPO12P CertiFiber Max test reference cord set supports accurate optical loss testing of single-mode MPO12 unpinned fiber when used with CertiFiber Max OLTS.

The Phoenix Contact PSR-SCF-24UC/URM/2x21 is a safety coupling relay designed for safe switch-off applications in industrial control systems. It features two force-guided changeover contacts, 24 V AC/DC supply voltage, and supports safety category 1, PL c, and SIL 1 applications.

The Allen-Bradley 800B-PS11 is a 16 mm snap-action contact block with one normally open and one normally closed contact. Designed for Bulletin 800B push button and selector switch operators, it supports reliable low-voltage switching and compact panel installations in light industrial and instrumentation applications.

Schneider Modicon AS-W808-002 remote I/O signal and power cable enables communication and auxiliary power between Modicon 984 and 800 Series PLC processors and remote terminal bases in legacy automation systems.

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.

Turck BI10-G30SK-RZ3X2 inductive proximity sensor with 10 mm rated switching distance. M30 threaded, flush-mount metal housing with terminal chamber connection. Supports 20–250 VAC and 10–300 VDC operation with 2-wire NC output for industrial metal detection.

Turck NI10-G18SK-RZ3X2 55MM inductive proximity sensor with 10 mm rated switching distance. Non-flush M18 threaded design with chrome-plated brass housing. Supports 20–250 VAC or 10–300 VDC operation using a 2-wire NC output. Terminal chamber connection with IP67 protection.

Fluke 1777 Power Quality Analyzer delivers automatic three-phase power and harmonic analysis with high-speed transient capture and included 1-year Premium Care.

Fluke Networks GLD3-CFP-SM-ADD Gold Support is a 3-year parts & labor maintenance plan for CFP-SM-ADD, providing repair service, parts replacement, software/firmware updates, and technical support access.