Search results for: 'goods with'

The Ferraz Shawmut USCC3 (M217522) is a 3-pole Class CC fuse holder rated 30A and 600 VAC/VDC. Designed for 35mm DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial circuit protection applications.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

The Kepco RA60 is a 19-inch rack-mount mainframe designed to house up to three Kepco HSP Series DC power supply modules. This configuration includes HSP 24-60MR and HSP 24-60R modules, supporting parallel operation, hot-swap capability, and high-current 24 VDC power distribution.

The Mitsubishi SR-T5 AC100V 3A2B contactor relay is designed for control circuits requiring reliable auxiliary switching. It operates on a 100–127 VAC coil and provides 3 normally open and 2 normally closed contacts. The compact design supports DIN rail or screw mounting.

The Allen-Bradley 1769-IQ16 is a Compact I/O 16-point, 24V DC digital input module for CompactLogix and MicroLogix 1500 systems. It supports sinking and sourcing inputs, provides LED status indication per point, and installs via DIN rail or panel mount.

Schneider Modicon AS-W808-002 remote I/O signal and power cable enables communication and auxiliary power between Modicon 984 and 800 Series PLC processors and remote terminal bases in legacy automation systems.

Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40 is a DIN-rail mounted redundancy diode module for 12–24 V DC systems. It decouples parallel power supplies to increase system availability, supporting 2×20 A redundancy or 1×40 A increasing power operation.

The GE Fanuc Genius IC660BBA106 is a current-source analog input block with six input channels designed for the Genius I/O system. It operates on 115 VAC or 125 VDC and supports 4–20 mA current inputs for industrial analog signal acquisition.

Toshiba VF-S11-4015PL-WN industrial inverter delivers precise speed control for 3-phase induction motors, supporting 1.5kW operation on 380–500V systems with compact panel-mount design and flexible control modes.

Allen-Bradley 193-EPM2 is a DIN rail and panel mount adapter that enables remote mounting of compatible Bulletin 193-E solid-state overload relays, improving layout flexibility in industrial motor control panels.

Allen-Bradley 800T-N40 red replacement cap for 30.5mm push-to-test pilot lights. Designed for Bulletin 800T and 800H operators to restore visibility and control identification.

Allen-Bradley S50411-002 dynamic brake board enables controlled motor deceleration by managing regenerative energy through external brake resistors in compatible 1305 variable frequency drives.

Allen-Bradley 1334-MOD-W3 run/fault contact mod kit adds isolated relay outputs for remote drive status monitoring on Bulletin 1334 and 1335 AC drives, supporting external control and annunciation systems.

Toshiba VFS15-4015PL-W VF-S15 variable frequency drive delivers precise 3-phase motor speed control up to 1.5 kW. Designed for compact industrial installations requiring reliable torque control and energy efficiency.

Fluke TiS75+ thermal imager delivers 384x288 resolution, 27Hz imaging, dew point alarms, and voice annotation to simplify industrial and building inspections.

Allen-Bradley 1492-CB1 H030 is a 3A, 1-pole DIN rail supplementary circuit breaker designed for control circuit protection, featuring an H-trip curve for highly inductive loads and compact panel integration.

Allen-Bradley 1492-CB2 H 200 is a 2-pole DIN-rail supplementary circuit breaker designed for industrial control panels, providing reliable thermal-magnetic overcurrent protection with an H-curve trip characteristic.

Fluke TL26A 5-way test lead set offers versatile gripping, piercing, and blade connections with silicone insulation rated −80°C to 150°C for reliable meter testing.

The Fluke LIQ-DUO-KIT-6PK contains six LinkIQ Duo tester kits, each capable of 10 Gb/s cable testing, network switch diagnostics, PoE verification, and Wi-Fi analysis. This bundle is suited for larger technician teams and multi-site deployments.

Allen-Bradley 1492-FB3J60-L fuse holder provides secure Class J fuse mounting for control applications, supporting reliable protection in industrial systems.

Fluke FLK-075-CLKT IR Window: 3" C-Range Kwik Twist design with AutoGround™ and ClirVu® coating for safe, clear, and durable infrared inspections.

Eaton WMZT1C10 offers reliable 10A C-curve protection for 277/480V panels, delivering dependable DIN-rail circuit safety for industrial and commercial systems.

The Fluke Networks MT-8200-63A IntelliTone Pro 200 Probe combines digital and analog toning to trace and locate copper cables on active or inactive networks. It features visual LED indicators, RJ11/RJ45 adapter cables, and automatic shut-off for efficient field use.

Fluke Networks PRO3000F60-KIT: Filtered probe and tone generator for precise cable tracing, SmartTone™ tech, and interference blocking.