Search results for: 'ins'

Sauermann Si-CA 030 Kit 2AS brings combustion analysis into a compact field kit, measuring O2 and CO while calculating CO2, efficiency, excess air, and draft for boiler service workflows.

T&R PT30-10 High Voltage DC Test System: Reliable, portable solution for cable testing up to ±30kV. Designed for safety with automatic discharge and overload protection.

INNO Instrument SCTX1000 is a 1000A AC/DC pass-through current sensor with 30.9 mm aperture, DB9 connection, DC to 300 kHz bandwidth, and ±15V to ±24V supply requirement.

INNO Instrument SPA3000 digital power meter with 3 power channels, up to 1000 V measurement, DC to 100 kHz bandwidth, and 4-item LED display for voltage, current, and power measurement.

INNO Instrument SPA6000 is a modular power analyzer with a 12.1-inch touchscreen, support for up to four input modules, 512GB internal storage, and AC/DC power measurement bandwidth from DC to 5MHz.

The INNO Instrument 300-meter Fiber Optic Launch Reel is a  singlemode reference fiber used with optical time domain reflectometers (OTDR) to eliminate near-end dead zones during fiber testing. The reel integrates singlemode fiber with SC/UPC connectors on both ends that enables accurate measurement of connector loss and reflectance.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

Emerson Ovation 5X00106G31 electronics module for Ovation DCS analog input. Provides 8 isolated 4–20 mA channels with per-channel HART transceivers for device communication. Supports signal acquisition between field devices and the controller.

Allen-Bradley 1771-A1B/B is a 4-slot PLC-5 I/O chassis designed to house processors, power supplies, and 1771 I/O modules, providing reliable backplane connectivity for panel-mounted industrial control systems.

Lenze AC Tech M1430B MC1000 series variable frequency drive rated 3 HP (2.2 kW) with 400/480 VAC 3-phase input and 0–120 Hz output in a NEMA 1 enclosure. Front keypad/faceplate with control buttons is missing; front of drive is open.

Allen-Bradley 1756-CN2R ControlLogix ControlNet communication module designed for redundant network architectures, providing high-speed ControlNet connectivity for distributed I/O and PLC systems.

HOMAG 15F5CBE-YA00 11 kW inverter delivers precise motor control for HOMAG woodworking machines, using KEB F5 technology for reliable industrial performance.

Hubbell HBL2311 delivers a secure 20A 125V twist-lock connection for industrial equipment, featuring Insulgrip durability and compatibility with L5-20R devices.

AFL SS03-compatible, CFS-3 equivalent single-fiber stripper for 2–3 mm jacket, 900 µm buffer, 250 µm coating, 125 µm cladding. New replacement tool with three-hole geometry; equivalent to OEMs, not the original brand.

Hydrajaws Heavy Duty Tester: Reliable, accurate load testing up to 145kN (32,597 lbf). Includes versatile adaptors and an easy-to-use digital gauge. Perfect for structural testing.

Sauermann Si-CA 130 KIT 2BH combustion gas analysis delivers O2 and CO measurement, combustion efficiency calculations, draft and differential pressure testing, wireless reporting, and real-time analysis through mobile and PC software platforms.

Trend Networks LanTEK IV-500 R163000 Certified Pre-Owned Cable Certifier Kit with CAT6A VisiLINQ Adapters, Fiber Inspection Microscope Support, Tone Test and TeamViewer Remote Control Tools. Includes Main + Remote Units and Carry Case.

Square D FAL3600311M Mag-Gard motor circuit protector delivers magnetic-only short-circuit protection for motor control applications with a 3A rating, 3-pole design, 600VAC operation, and adjustable 8A to 28A trip setting.

The INNO Instrument View 600 OTDR is a modular fiber optic test platform configured with a 1310/1550 nm single-mode OTDR module delivering 36/35 dB dynamic range. This kit includes the V-20 fiber inspection microscope for connector end-face inspection. The View 600 integrates automated SOLA link analysis, optical power meter functionality.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

The Megger NIM 1000 is a portable net impedance meter for low-voltage grid testing. It delivers adjustable 80–1000A test current and measures impedance, resistance, reactance, and PEN impedance with harmonic analysis to the 10th order, plus USB data export.

The Potter & Brumfield KUP14D15 is an enclosed electromechanical control relay with a 12 VDC coil and a 3PDT (3 Form C) contact configuration. This relay features an 11-pin blade terminal base and a clear polycarbonate dust cover for component visibility.

Allen-Bradley 1771-IAD PLC-5 digital input module with 16 AC/DC inputs. Designed for 120V industrial signals, reliable discrete device monitoring, and seamless integration into 1771 I/O chassis.