Search results for: 'usd and'

The Telemotive E7160-101 Radio Remote Control Receiver Module is a board-level component used within compatible Telemotive industrial radio control receiver assemblies. It functions as a receiver module in fixed-station radio control systems for industrial equipment integration.

PDQ 6200R-01 wide stile rim exit device for 36" doors in US32D finish. Panic rated, reversible, and built for commercial duty applications.

Microprocessor controlled Large LCD display with shuffle knob design Alumina ceramic heating element for fast heat recovery 3 data memories to save commonly used temperatures USB 5V/1A power output Auto sleep, wake, and power-off functions Input Voltage AC 110~120V 60Hz Control System Microprocessor-controlled Power Consumption 60W Display LCD 73mmX40mm, Backlight Temperature Range 200~480°C / 392°F~896°F Temperature Calibration 100~699°C (212~1290°F), Adjustable Temperature Stability ±2°C/±36°F (no load) Heating Element Alumina ceramic Sleep Mode OFF/1-240min adjustable Output Voltage 24VAC Temperature of Sleep Mode 200°C/392°F USB Port Output DC 5V/1A Memory 3 sets Tip-to-Ground Resistance/Potential ≤2Ω/≤2mV Size 7.1 x 5.9 x 4.2 inches Weight 4.6 lbs Certificate TUV, RoHS

The Deublin 1595-040C is a repair kit intended for use with Deublin Model 1005 single-passage rotating unions. It is associated with servicing seals and bearings used in Model 1005 unions operating with air, hydraulic oil, or vacuum in industrial applications. Kit contents are not detailed in the provided data.

The Comau 10125260 Safety Relay Board is an industrial automation component used within Comau robotic control systems. It functions as a safety relay module designed to support safety monitoring circuits in industrial robotics applications operating with 24 V DC auxiliary power

INNO Instrument PTB03 is a three-phase wiring adapter box used as a test converter for switching three-phase connections during electrical measurement and power analysis workflows.

The Fluke 196C ScopeMeter is a high-performance oscilloscope designed for demanding applications. It offers specifications typically found on top-end bench instruments, including a dual input, 100 MHz bandwidth, and 1 GS/s real-time sample rate. With a high-resolution color display and 3000 data points per channel waveform resolution, it provides accurate and detailed waveform analysis. The scope features Connect-and-View automatic triggering, manual trigger modes, external triggering options, frequency spectrum analysis using Fast Fourier Transform, and digital persistence for analyzing complex dynamic waveforms. Its fast display update rate allows for real-time observation of dynamic behavior.

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

Trimble GeoExplorer 2008 Handheld GPS: High-performance GPS with TerraSync and Bluetooth for precise navigation. Rugged, reliable, and built for all-day use in any field.

Used Sonatest SSG50502 shear wave angle beam ultrasonic transducer with 2.25 MHz frequency and 0.50" crystal diameter. Features a BNC connector and is designed for high-accuracy flaw detection. Tested and certified for immediate deployment.

Adam Equipment Equinox EPB 723e Balance: High-precision lab weighing with color touch screen, fast stabilization, and smart features. Built for accuracy.

Used GE 60 ALLUM 210-852-213 ultrasonic wedge for 60° shear wave inspection in aluminum. Precision engineered and fully compatible with GE MWB and Accuscan series transducers for reliable weld and flaw detection.

Square D 9999 LL0 is a lug-lug kit for Type S contactor and starter configurations, supporting NEMA sizes 00, 0, and 1 in Class 9999 Type LL0 applications.

Product Overview

Fluke Networks TRC-SM-VERIFY-MMC16U is a reference-grade single-mode verification test reference cord for CertiFiber™ Max optical loss testing. It is a 1 m, 16-fiber, Type A MMC cord with APC/U connectors, used to verify proper reference setup accuracy.

Used GE 210-852-201 ultrasonic wedge engineered for 45° shear wave ultrasonic testing in aluminum. Precision manufactured and compatible with GE MWB and Accuscan transducers. Fully tested and certified for reliable flaw detection and weld inspection.

The Telemotive E7207-1 Circuit Board is an industrial automation component used in Telemotive radio control systems. Identified by part number E7207-1, this board is commonly applied in industrial control environments including crane and hoist remote control systems.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

Used Waygate 57K0203P1 70° shear wave angle beam wedge engineered for 0.50" ultrasonic transducers. Specially optimized for carbon steel inspections with Accupath series transducers. Thoroughly tested and ready for field deployment.

INNO Instrument OLL-500-652D-SC-UPC OTDR launch fiber reel provides a 500 m singlemode fiber link used with optical time domain reflectometers to stabilize launch conditions and support evaluation of fiber connections during installation, verification, and troubleshooting.