Search results for: 'alarm'

Fluke 572-2 Infrared and Contact Thermometer measures from -30°C to 900°C (-22°F to 1652°F) with a 60:1 distance-to-spot ratio and dual laser sighting. Features adjustable emissivity, MAX/MIN/DIF/AVG display modes, and multi-language interface. Includes K-type bead probe, hard case, and USB cable.

The Emerson 73-610-115 is a DeltaV system power supply (DC/DC) module with 24 VDC system power input and labeled 12V, 5.1V, and 3.4V output rails.

Eagle Eye Power Solutions LB-Series constant current DC load banks support battery discharge, capacity, acceptance, and DC system testing with auto-sensing voltage control.

The Telemecanique GV2-AE11 is a front-mounted auxiliary contact block with 1 normally open and 1 normally closed contact. Designed for TeSys GV2 and GV3 motor circuit breakers, it provides status signaling and control feedback using screw clamp terminals.

The Met One R4805 is a stainless steel remote airborne particle counter designed for continuous cleanroom monitoring. It measures 0.5 µm and 5.0 µm particles at 0.1 CFM using RS-485 serial communication and a long-life laser diode for low-maintenance operation.

Fluke 985 Particle Counter: Portable, ergonomic air quality monitor for HVAC pros with long battery life and easy data export options.

Fluke 64 MAX: Compact infrared thermometer with -22°F to 1112°F range, data logging, adjustable emissivity, and rugged 3-meter drop design.

AEMC PowerPad III power quality analyzer supports single- and three-phase diagnostics with voltage/current inputs, trend recording, alarms, and USB data transfer.

Fluke TiS75+ thermal imager delivers 384x288 resolution, 27Hz imaging, dew point alarms, and voice annotation to simplify industrial and building inspections.

The MIP LM 3086 EPA3 is a laser-based opacity and dust monitor designed for continuous emissions monitoring in industrial stacks. It uses a single-pass, dual-path laser architecture with an optical reference path to measure opacity, optical density, and calibrated dust concentration values.

Fluke 1535 Insulation Resistance Tester delivers 250V–2500V testing with insulation measurements up to 500 GΩ. Designed for industrial and solar environments with CAT IV 600V safety and automatic PI/DAR calculations.

Fluke 3540 FC KIT enables three-phase power monitoring with wireless cloud streaming, harmonic analysis, and real-time condition monitoring.

Research-Cottrell RK-1300-CSA TRC interface board for use with SCR firing assemblies in electrostatic precipitator transformer-rectifier power control systems.

The Adam Equipment Solis Precision Balances-STB 3202i offers exceptional accuracy and versatility with a high-resolution graphic display. Perfect for labs needing precise results.

Adam Equipment GBK 30aM Checkweighing Scale: Trade-approved, heavy-duty, with stainless steel pan, audible alarm, and backlit LCD. Perfect for industrial weighing tasks.

Westinghouse 9966D75G01 IQ Data Plus II power monitoring display delivers three-phase electrical measurement including amps, volts, watts, power factor, and energy data for digital metering systems.

Siemens A1-108-101-502 operator display control panel for parameter access, status monitoring, and fault diagnostics in compatible SIMOREG DC drive systems.

Alstom ESA-700 UV flame signal analyzer for Limelight Exacta systems, providing fast flame failure detection and reliable burner monitoring in large combustion equipment using 21.6–26V AC input power.

Allen-Bradley 1334-MOD-W3 run/fault contact mod kit adds isolated relay outputs for remote drive status monitoring on Bulletin 1334 and 1335 AC drives, supporting external control and annunciation systems.

Adam Equipment WBW 15aM Washdown Scales: Durable and waterproof, perfect for agriculture, food service, and retail. NTEP and Measurement Canada approved. Reliable performance in wet environments.

Adam Equipment Solis Precision Balances-STB 8202e: Achieve high-precision weighing in labs with a large graphic display, external calibration, and easy-to-use features.

Adam Equipment Solis Precision Balances-SPB 723e is a high-performance balance offering precision results for labs. Features a high-resolution graphic display, external calibration, and multilingual support.

Adam Equipment Solis Precision Balances SPB 363i offers exceptional accuracy with a 360g capacity and 0.001g readability. Ideal for research, quality assurance, and precision counting needs.